Au fost găsite 40 produse care corespund căutării dvs. pentru systems în magazine 1:

Active 15" floor monitor with 300 Watt RMS power, high quality technology & dispersion pattern by 50° x 90° CD horn. Active ground monitor Compact and powerful stage monitor with high-quality technology Class-D power amplifier with 300 W RMS/1200 W peak and 129 dB max. SPL Coaxial design for a true point source with a 1.75" titanium diaphragm HF driver 15" woofer with 2.5" voice coil Optimized, practical dispersion pattern with 50° x 90° CD horn DynX® DSP (Gen.2) for distortion-free output even at maximum volume 3-band EQ, notch filter, 4 application presets and delay function PowerCON-compatible, loop-through, professional power connector 35 mm stand mount for FOH applications Durable polyurea coating and rugged front grille MON G3 Series LD-Systems MON 15 A G3 at a glance The MON 15 A G3 from LD-Systems is a compact and powerful stage monitor. With a maximum sound pressure of 129 dB and an impressive bass performance, the MON 15 A G3 is ideally suited for loud band stages, as drum fill or in stand-alone use as a compact front PA without the need for an additional subwoofer. Also with its impressive performance, the compact and elegant 15" stage monitor fits harmoniously into any stage setting. MON G3 Series The LD Systems MON G3 Series is a completely redesigned family of active stage monitors designed to deliver high performance. The MON G3 Series incorporates the advanced technology and high-quality materials found in high-end monitors used primarily in professional applications. This quality is now made available to everyone. These include eg. advanced coaxial speakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. In addition, there is the high robustness, the extensive equipment and the elegant LD-Systems design. Equipment The Class D power amplifier with 300 watts RMS and a maximum sound pressure level of 129 dB provides powerful and clear audio reproduction. The model features a coaxial design that allows for true point source sound. The 1.75" titanium diaphragm HF driver delivers precise and detailed highs, while the 15" woofer with a 2.5" voice coil provides punchy and well-defined bass. The dispersion pattern of the MON 15 A G3 is optimized and designed for practical use. The 50° x 90° CD horn ensures even sound distribution and high speech intelligibility on stage. With the 2nd Generation DynX DSP, the monitor offers distortion-free reproduction, even at maximum volume. In addition, a 3-band EQ, a notch filter, four application presets and a delay function are available to adjust the sound to individual needs. Furthermore, the product is also well-equipped in terms of connectivity and ease of use. Both the signal (XLR/jack combo) and power (PowerCON compatible) connections can be looped through. This allows for elegant, tidy cabling in multi-monitor setups or distributed sound reinforcement. The 35mm stand mount...

Active 12" floor monitor with 300 Watt RMS power, high quality technology & dispersion pattern by 50° x 90° CD horn. Active ground monitor Compact and powerful stage monitor with high-quality technology Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL Coaxial design for a true point source with a 1.75" titanium diaphragm HF driver 12" woofer with 2.5" voice coil Optimized, practical dispersion pattern with 50° x 90° CD horn DynX® DSP (Gen.2) for distortion-free output even at maximum volume 3-band EQ, notch filter, 4 application presets and delay function PowerCON-compatible, loop-through, professional power connector 35 mm stand mount for FOH applications Durable polyurea coating and rugged front grille MON G3 Series LD-Systems MON 12 A G3 at a glance The MON 12 A G3 from LD-Systems is a compact and powerful stage monitor that represents the golden mean of the new floor monitor family when it comes to sonic fullness, sound pressure and transportability. With coaxial construction for a true point source, smart electronics and high-quality design, the MON 12 A G3 brings this concept into the "modern age". The ideal dispersion pattern of 50° x 90° in monitor use and 90° x 50° in FOH use make it a multi-talent that provides the right solution for a wide range of different tasks. MON G3 Series The LD Systems MON G3 Series is a completely new family of active stage monitors designed for high performance. The MON G3 Series incorporates the advanced technology and high-quality materials found in high-end monitors used primarily in professional applications. This quality is now made available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. In addition, there is the high robustness, the extensive equipment and the elegant LD-Systems design. Equipment The Class D power amplifier with 300 watts RMS and a maximum sound pressure level of 127 dB provides powerful and clear audio reproduction. The model features a coaxial design that allows for true point source sound. The 1.75" titanium diaphragm HF driver delivers precise and detailed highs, while the 12" woofer with a 2.5" voice coil provides punchy and well-defined bass. The dispersion pattern of the MON 12 A G3 is optimized and designed for practical use. The 50° x 90° CD horn ensures even sound distribution and high speech intelligibility on stage. With the 2nd Generation DynX DSP, the monitor offers distortion-free reproduction, even at maximum volume. In addition, a 3-band EQ, a notch filter, four application presets and a delay function are available to adjust the sound to individual needs. Furthermore, the product is also well-equipped in terms of connectivity and ease of use. Both the signal (XLR/jack combo) and power (PowerCON compatible) connections can be looped through. This allows for...

Active 10" floor monitor with 300 Watt RMS power, high quality technology & dispersion pattern by 50° x 90° CD horn. Active ground monitor Compact and powerful stage monitor with high quality technology Class-D power amplifier with 300 W RMS/1200 W peak and 126 dB max. SPL Coaxial design for a true point source with a 1.75" titanium diaphragm HF driver 10" woofer with 2.5" voice coil Optimized, practical dispersion pattern with 50° x 90° CD horn DynX® DSP (Gen.2) for distortion-free output even at maximum volume 3-band EQ, notch filter, 4 application presets and delay function PowerCON-compatible, loop-through, professional power connector 35 mm stand mount for FOH applications Durable polyurea coating and rugged front grille MON G3 Series LD-Systems MON 10 A G3 at a glance The MON 10 A G3 from LD-Systems is a compact and powerful stage monitor that can be inconspicuously integrated into the stage set. It delivers sufficient sound pressure to assert itself even in louder band situations. The ideal dispersion pattern of 50° x 90° in monitor use and 90° x 50° in FOH use make it a multi-talent that offers the right solution for many different tasks. MON G3 Series The LD Systems MON G3 Series is a completely new family of active stage monitors designed for high performance. The MON G3 Series incorporates the advanced technology and high-quality materials found in high-end monitors used primarily in professional applications. This quality is now made available to everyone. These include eg. advanced coaxial loudspeakers with integrated 50° x 90° CD horn, ensuring the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. In addition, there is the high robustness, the extensive equipment and the elegant LD-Systems design. Equipment The Class D power amplifier with 300 watts RMS and a maximum sound pressure level of 126 dB provides powerful and clear audio reproduction. The model features a coaxial design that allows for true point source sound. The 1.75" titanium diaphragm HF driver delivers precise and detailed highs, while the 10" woofer with a 2.5" voice coil provides punchy and well-defined bass. The dispersion pattern of the MON 10 A G3 is optimized and designed for practical use. The 50° x 90° CD horn ensures even sound distribution and high speech intelligibility on stage. With the 2nd Generation DynX DSP, the monitor offers distortion-free reproduction, even at maximum volume. In addition, a 3-band EQ, a notch filter, four application presets and a delay function are available to adjust the sound to individual needs. Furthermore, the product is also well-equipped in terms of connectivity and ease of use. Both the signal (XLR/jack combo) and power (PowerCON compatible) connections can be looped through. This allows for elegant, tidy cabling in multi-monitor setups or distributed sound reinforcement. The 35mm stand mount allows for easy mounting on a speaker stand for FOH applications....

Active 12" stage monitor with 250 watts RMS power, 6.3 mm jack and XLR connectors, Class A/B amplifier, bass reflex enclosure 12" active stage monitor Size woofer: 12" Size woofer: 304 mm Type woofer: Coaxial speaker Magnet woofer: Ferrite Woofer brand: Custom Made Voice coil woofer: 2" Voice coil woofer: 50.8 mm HF driver size: 1" HF driver size: 25.4 mm Magnet HF driver: Ferrite HF driver brand: Custom Made Voice coil HF driver: 1" Voice coil HF driver: 25.4 mm Amplifier: Class A/B Beam angle (H x V): 75 x 75° Power (RMS): 250 W Power (Peak): 1000 W Frequency response: 80 - 20000 Hz Crossover frequency: 2200 Hz SPL (1 W/1 m): 100 dB Max. SPL (continuous): 116 dB Max. SPL (peak): 124 dB Protection circuits: Short circuit, limiter Controls: On / Off, Volume Display elements: Limit, Power, Signal Number of line inputs: 1 Line input connectors: 6.3 mm jack, XLR Number of line outputs: 1 Line output connectors: XLR Power supply: Transformer Operating voltage: 230 V AC, 50 - 60 Hz Cabinet material: 15 mm plywood Enclosure type: bass reflex Monitor angle: 35° Width: 440 mm Depth: 360 mm Height: 514 mm Weight: 17,8 kg Features: Ergonomic handle LD-Systems MON 121 A G2 at a glance The MON 121A G2 is a compact active stage monitor for all mobile applications. The specially designed 12" coaxial speaker with integrated 1" high frequency driver and powerful ferrite magnets features a precise symmetrical dispersion over 75° x 75° and achieves a maximum sound pressure of 124dB with highest feedback immunity. It is driven by a Class AB power amplifier with 1000W peak power. The frequency response ranges from 80Hz - 20kHz. Safe operation of the LD MON 121 A G2 is ensured by a limiter, which prevents overloading of the speaker, and a protective circuit against short circuits. An XLR jack combo jack serves as the input, and an XLR output allows the signal to be looped through. Other features of the connector panel include a volume control, IEC power jack and different colored LEDs that indicate power supply, signal and limiter function. The visually elegant bass reflex cabinet of the LD system MON 121 A G2 is made of 15mm thick multiplex coated with durable lacquer. A sturdy metal grille protects the speaker from damage, and ergonomically milled handles facilitate transport. The monitor angle is 35°.

The compact column system MAUI 5 from LD Systems offers a high horizontal range and fast wireless setup. Excellent for mobile u... portable PA System, white version Super compact and quickly installed! Ultra-light and ultra-compact The compact MAUI 5 column system from LD Systems offers high horizontal coverage and fast wireless setup. Excellent for mobile use and unobtrusive installations. LECC Digital processing for balanced, dynamic sound. The MAUI 5 is an ultra-light and compact column PA that can reach official sound levels up to 120 dB with 800W peak power. The setup of the LD Systems MAUI systems is lightning fast thanks to special MultiPIN connectors; peripherals such as cables or stands are not required here. The special arrangement of the mid/high-range speakers also results in an extra-wide horizontal coverage angle of 120°, which allows even large and wide rooms to be covered effectively. No matter from which listener position in the room - the complete frequency spectrum is reproduced and thus a balanced sound performance is achieved everywhere. The MAUI5 system consists of four individual components: A subwoofer unit, in which the powerful Class D amplifiers as well as the mixer unit have also been integrated, and three clip-on array speakers, which can be attached as needed. This means that for smaller events, such as a living room concert or a training situation, where equipping only one column unit could be sufficient, the transport weight of the system would shrink to a minimum of just 11.3 kg! When fully expanded, the transport weight increases, but so does the power level. With 120dB peak power, the MAUI5 can be fully expanded so easily already conference rooms, smaller churches or clubs effectively sound. For many applications already sufficiently equipped and extremely practical integrated into the subwoofer unit, the 4 channel mixer comes with integrated Bluetooth technology. This allows wireless streaming of audio files in addition to the existing connection options of the system. For example, it is possible to connect a vocal microphone, a guitar and a stereo keyboard to the speaker system via cable and mix them, while you can playback via smartphone or tablet in parallel. 4 channel mixer with Bluetooth streaming Whether for professional speakers, music groups, schools, entertainers or in conference use - the LD Systems MAUI5 presents itself as a transport-friendly, mobile audio solution that is well thought out in detail, brings along many effective features, delivers good sound quality and knows how to serve many audio applications excellently, from training, to smaller concerts, to speech transmission in large conference rooms. The LD Systems MAUI 5: Type: Ultra mobile Column PA System with Mixer Subwoofer: 1 x 8" bass reflex vertical array System: 4 x 3" Power amplifier: Class D Dispersion angle: 120°H x 20°V Power Output: 200W RMS / 800 W Peak Frequency range: 50 Hz - 20 kHz Max SPL (Peak): 120 dB Signal Processing...

Active 2.1 PA system with 680 watts total power (peak), 6 channel mixer with EQ and reverb, Bluetooth, selectable presets Compact 2.1 sound system active Active 2.1 sound system with 10'' subwoofer and 2x double 4'' satellites Total power: 680 W Integrated 6-channel mixer with EQ and reverb Selectable input for microphone, Hi-Z or line level devices Digital SPDIF TOSLINK stereo input Wireless streaming via Bluetooth Homogeneous dispersion thanks to newly developed waveguide DynX® DSP for distortion-free playback Selectable presets depending on setup (stereo / cluster mode) Durable polyurea coating for subwoofer and satellites The LD-Systems DAVE 10 G4X at a glance: LD-Systems expands the popular DAVE series with the DAVE 10 G4X, an active PA system consisting of 10'' subwoofer and two satellites with double 4" equipment with a total power of 680 watts peak. The compact 2.1 system not only offers a new, modern design with numerous handling optimizations, but also an integrated 6-channel mixer with all important input options. This allows you to create a wide variety of setups and combinations of instruments, vocals and feeds - wired and wireless thanks to integrated Bluetooth for easy streaming via a smartphone or tablet. 6 Channel Mixer with Bluetooth The first two channels of the mixer are designed as channel strips. Here you can connect either a microphone, a high-impedance instrument - for example guitar and Bass - as well as line-level sources. A 2-band EQ forbass and treble as well as an adjustable Reverb with three presets (small, large, plate) are available for sound shaping. Channels 3+4 are designed as stereo line inputs and are suitable for keyboards, synthesizers, Drum machines or small e-drum kits, among others. The DAVE 10 G4X sound system becomes even more versatile when you use the digital SPDIF stereo input or the Bluetooth connection to connect a CD player, computer or smartphone. Need some backing tracks or sound effects for your gig and want to run some music before the concert starts? No problem. You can also use the inputs (channels 5+6) for a karaoke system or just to play a TV in the sports bar with official sound. New design The DAVE 10 G4X from LD-Systems has been redesigned and developed from the ground up. Not only instruments and music benefit from this, but also speech intelligibility if you want to use the sound system for lectures, speeches or a panel discussion every now and then. The DAVE 10 G4X uses a new dome tweeter and waveguides for homogeneous dispersion, as well as FIR filters and state-of-the-art DSP technology for a transparent, distortion-free sound - thanks to the optimized bass reflex system in the subwoofer with minimal ventilation noise. Predestined for flexible use The DAVE 10 G4X sound system is a 2.1 stereo sound system with two selectable stereo presets. Usually you will place the two satellites left and right in the room or on a stage. The classic stereo preset is intended for this purpose....

Features: Manufacturer: LD-Systems Polar Pattern: Cardioid On/Off Switch: Yes Battery Power: Yes Switchable Pad: Yes Switchable Low Cut: No Clip Microphone: No Swan Neck: No Switchable Frequncies: Yes Frequency Band: UHF Diversity: Yes Detachable antenna: No Wireless System: Universal incl. Clamp: No

Professional pole speaker system, 1,500 watts total power (RMS), frequency response from 37 Hz to 20 kHz, DSP, Bluetooth, mono/... Professional pole speaker system For bands and DJs, pole systems have triggered a true revolution in numerous areas of application. It has never been easier to provide even large rooms with a small and inconspicuous PA system that provides uniform sound. With the LD-Systems MAUI 44 G2 pole sound system, the professional segment is now also served with these practical and powerful sound reinforcement systems. With the MAUI 44 G2, LD-Systems presents the latest flagship of the pole speaker systems from the MAUI series. The speaker system offers generous 1,500 Watt total power (RMS) with a frequency response of 37 Hz to 20 kHz and a sound pressure of 132 dB (peak). The LD-Systems MAUI 44 G2: Professional pole PA system with 1500 W RMS and 132 dB max SPL Cardioid pole for controlled radiation in the low-mid frequencies and Cardioid subwoofer application (with second subwoofer) TrueWireless™ Stereo for wireless stereo pairing of two pole systems aptX™ and AAC encoding for high-resolution Bluetooth® streaming Homogeneous radiation pattern due to a BEM-optimized high-frequency waveguide, acoustic lens for coherent wavefront in the middle range and flow-optimized bass-reflex channels Distortion-free sound at maximum volume thanks to DynX® DSP technology Automatic setup recognition Quick and easy setup without tripods or cables Robust subwoofer enclosure made of birch multiplex with polyurea coating and lightweight, powder-coated aluminum column With its outstanding sound characteristics and diverse functions, this compact LD-System MAUI 44 G2 PA pole system is recommended for rental companies, musicians, small clubs, street festivals and for permanent installations. The cardioid characteristics of the pole elements as well as the possibility to achieve a cardioid application also in the bass range with an additional subwoofer illustrate the professional claim of the new flagship. A rear attenuation of 18 dB is achieved with the pole and 15 dB with the subwoofer. The LD-Systems MAUI 44 G2 also sets the tone when it comes to equipping the two-piece pole with twelve 3.5" neodymium full-range speakers and four 1" HF drivers with waveguide. The phase plugs on the six upper drivers improve the horizontal directivity, reduce the distortion and optimize the sensitivity below the crossover frequency for the tweeters. In addition, the four tweeters feature specially designed and optimized compression drivers coupled to a constant directivity waveguide to provide 120° of coverage across the width and 25° of focused vertical directivity. The curved design of the waveguide transports more energy in the high frequencies to listeners standing further away. On the input side, the LD-Systems MAUI 44 G2 offers two XLR IN connectors. Two XLR outputs allow wired stereo configuration of two systems. An additional subwoofer can be connected via...

Professional column PA system in white, 1500 watts RMS power, including Bluetooth, quick and easy setup Columns PA system Professional column PA system with 1500 W RMS and 132 dB max. SPL Cardioid column for controlled dispersion in the low-mid frequencies as well as cardioid subwoofer application (with second subwoofer) TrueWireless™ Stereo for wireless stereo pairing of two column systems aptX™ and AAC encoding for high-resolution Bluetooth® streaming Homogeneous dispersion due to a BEM-optimized tweeter waveguide, acoustic lens for coherent midrange wavefront and flow-optimized bass-reflex channels Distortion-free sound at maximum volume thanks to DynX® DSP technology Automatic setup recognition Quick and easy setup without stands or cables Robust subwoofer cabinet made of birch multiplex with polyurea coating and lightweight, powder-coated aluminum column The MAUI 44 G2 W at a glance For bands and DJs, column systems have sparked a true revolution in numerous applications. It has never been easier to evenly sound even large rooms with a small and unobtrusive PA system. With the LD-Systems MAUI 44 G2 W, the professional segment is now also served by these practical and powerful sound reinforcement systems. The new flagship of the MAUI series and offers a generous 1,500 watts of total power (RMS) with a frequency response of 37 Hz to 20 kHz and a sound pressure of 132 dB (peak). With its superior sound characteristics and multiple features, this compact column PA is recommended for rental companies, musicians, small clubs, street festivals as well as fixed installations. The cardioid characteristics of the column elements, as well as the possibility of achieving a cardioid application in the bass range with an additional subwoofer, further illustrate the professional claim of this sound system. A rear attenuation of 18 dB is achieved for the column, and 15 dB for the subwoofer. The MAUI 44 G2 W also sets the tone when it comes to equipping the two-part column with twelve 3.5" neodymium full-range speakers and four 1" HF drivers with waveguide. Phase plugs on the six upper drivers improve horizontal directivity, reduce distortion, and optimize sensitivity below the crossover frequency for the tweeters. In addition, the four tweeters feature specially designed and optimized compression drivers connected to a constant-directivity waveguide for 120° of coverage across the width and 25° of focused vertical directivity. The curved design of the waveguide transports more energy in the high frequencies to listeners standing farther away. Connections On the input side, the system offers two XLR IN connectors. Two XLR outputs allow for wired stereo configuration of two systems. An additional subwoofer can be connected via the SUB OUT, and power is supplied safely and reliably via a PowerCon connector. Automatic setup detection & TrueWireless stereo function Another particularly user-friendly feature is the automatic setup recognition of the MAUI 44 G2 W:...

Active column system with integrated 4-channel mixer, Bluetooth stereo audio streaming, Class D power amplifiers, 2600 watts of... Compact column system with mixer and Bluetooth, black All-in-one column speaker for PA and monitor applications 2,600 watts peak Class D system power offers high performance at low weight Powerful bass response due to 2 x 8" woofers Balanced midrange thanks to 16 x 3" full-range speakers Precise and silky highs with 2 x 1" tweeter drivers Increased range and wider room coverage due to array arrangement Homogeneous dispersion due to BEM-optimized tweeter waveguide Distortion-free sound even at highest volume thanks to LD Systems DynX® DSP technology Full control through 4-channel mixer incl. Bluetooth® stereo audio streaming Two-piece column for compact transport Secure plug-and-play connection thanks to wireless multipin LD Systems MAUI 28 G2 The MAUI 28 G2 from LD Systems is a compact, active column PA system with integrated mixer, Bluetooth streaming and powerful Class D power amplifiers. With the MAUI 28, LD Systems presents the update of their successful MAUI series. Equipped with new, more powerful Class D power amplifiers, the LD MAUI G2 now moves a little closer to the performance potential of a full-fledged PA system. High power, best performance, extensive features Designed as a classic column system, the MAUI 28 G2 convinces with its high mobility and high performance potential in equal measure. Consisting of a subwoofer module, which also integrates the mixing console, Class D power amplifiers and DSPs, and a column element that can be split for transport, the MAUI 28 G2 manages a total of 20 built-in speakers with a peak power of 2600 watts. Two 8" woofers in the subwoofer provide a substantial bass boost, while 16 individual 3" midrange drivers guarantee the best speech intelligibility and a wide effective range of the array system. Two 1" neodymium pressure drivers also provide the necessary transparency in the high frequency range. Special DynX-Technology DSP chips realize a reliable audio performance with extremely low distortion even at peak power levels. For this purpose, a multiband limiter, an intelligent EQ, compressor and an intelligent 3-way crossover with delay correction work simultaneously and DSP-controlled in the background. The special arrangement of the individual speakers ensures a high range, as well as wide room coverage, which makes separate monitor speakers in many cases unnecessary. The special waveguide of the tweeters provides an optimized dispersion pattern to effectively sound even a larger audience. This makes the MAUI 28 G2 the ideal mobile PA system for practicing musicians, smaller bands, speakers and small artists, but also interesting for a variety of installations, such as in churches, conference rooms, schools, universities or public spaces of all kinds. Not least due to the elegant, discreet design of the column system, it can be inconspicuously integrated into a wide...

The JB Systems COB 4BAR DJ LED Lighting Bar is a bright, compact and powerful 4- BAR with 4x COB LED ... The JB Systems COB 4BAR DJ LED Lighting Bar is a bright, compact and powerful 4- BAR with 4x COB LED - lights with 36 watt and 2 selectable beam angles. The advantage of COB LEDs over traditional is that all colour LEDs have already been installed on a chip (Chip on Board). There is no visible colour mixing front of the lens, all mixtures are made directly. The high performance of 4x 36 watt produces a light output that the conventional PAR56 with 300 watts exceeds bulbs. The maximum power consumption lies at only 120 watts. The JB Systems COB 4BAR is controlled via DMX with 3, 5, 6, 8, 12, 16, 17 or 18 channels, the optional foot controller, IR remote control or via the built-in programs (Auto mode, music control and master / slave ). Another highlight of JB Systems COB 4BAR is the 2 off via the IR remote control sockets on and off with the two additional effects on the bar can be operated. The main features of the JB Systems COB 4BAR DJ LED Lighting Bar include: No separate LEDs: Each headlight has a 36W COB LED with perfect colour mixing Exceptionally high light output Included IR remote control included 2x power sockets ( IEC , each max. 500W), each with on / off by remote control Standalone with IR Remote Control Auto mode Sound control Master / Slave mode Optional foot controller DMX 512 (3, 5, 6, 8, 12, 16, 17 or 18 channels) Angle of 15 ° with 100 ° lens or without lens. , 0-100% dimming Ultra-fast strobe function Alphanumeric 2x 16 character LCD display with backlight Including standard 35mm adapter for stands with 35mm intake. Included with the 4BAR heard a light, but solid carrying case. Power supply: 100-250VAC, 50 / 60Hz Power consumption: 120 watts Dimensions: 1000x 82x 320mm Weight (without case ): 7.6 kg

Features: Manufacturer: LD-Systems Typ: System Signal Processing: Active Size of Woofer (Inches): 15 Size of Tweeter (Inches): 1 Output in W (RMS): 1000 max. Peak SPL (dB): 131 Weight (kg): 48.2 Housing Material: Wood Multi-Function Housing: No Flange: M20 Airworthy: Yes Beam angle: 110° Frequency Response from (Hz): 40 Frequency Response to (Hz): 20000 Crossover Network: Yes DSP: No EQ: No Link: Yes Input: XLR Output: XLR/Speaker Twist Integrated Mixer: Yes Battery operation: No WLAN: No Bluetooth: No RJ45 Interface / Network: No Wheels included: No incl. Stand: No incl. Cover: No

The LD Systems Maui 11 G2 Active PA System is a portable column PA system with a mixer and Bluetooth connectivity, in black. T... Portable Column PA System with Mixer and Bluetooth black The LD Systems Maui 11 G2 Active PA System is a portable column PA system with a mixer and Bluetooth connectivity, in black. This complete sound system can be carried together with your instrument. Setting up this system that doubles as a PA and monitor system is easy thanks to the special multi-pin cable plugs. The compact Maui 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. Equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers, this system is driven by a light Class-D power amplifier boasting 1000W of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX DSP technology offers a top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter that protects against overloading, an EQ, a compressor and a three-way-crossover with run time correction. With an integrated four-channel mixer, system presets for mono or stereo configuration and Bluetooth Audio Streaming, you have full control over the system. The column and the subwoofer can be set up separately and includes a selection of transport accessories and special mounting hardware. The main features of the LD Systems Maui 11 G2 Active PA System include: Max. SPL (Peak): 124dB Frequency Response: 50Hz - 20kHz Low/Mid Drivers: 3x 6.5" Midrange Drivers: 8x 3" Tweeters: 2x 1" Amplifier: Class-D (500W RMS; 1000W Peak) Controls: Hi-Z Level, Power, Bluetooth Switch, Line Level, Main Level, Sub Level, Mono/Stereo Switch, MP3/Bluetooth Level Line Inputs: XLR/6.3mm Jack, RCA Mic Input: XLR/6.3mm Jack MP3 Input: 3.5mm Jack Hi-Z Input: 6.3mm Jack Line Output: XLR Direct Out Speaker Output: Custom-Made Multipin Bit Depth AD/DA Converter: 24-Bit Internal Sampling Frequency: 48 kHz Signal/Noise Ratio: 100dB Cooling: Convection Dispersion (H x V): 120° x 20° Weight: 24.9kg

The LD Systems MEI 1000 G2 is a license-free In-Ear Monitoring System with 96 channels in the mid-frequency bands 823-832 Mhz ... The LD Systems MEI 1000 G2 is a license-free In-Ear Monitoring System with 96 channels in the mid-frequency bands 823-832 Mhz and 863-865 Mhz. Comfortable earphones, good audio performance and extensive features makes the LD Systems MEI to an interresting solution in its price range. Transmission frequency range: 863.000 - 865.000MHz, 823.000 - 832.000MHz Weight: 1.3kg Channels: 96 (8 groups of 12 channels) Transmission method: FM, stereo Frequency response: 60Hz Signal-to-noise ratio: 80dB THD: 12 hrs., battery-dependent Dimensions receiver: 65mm x 90mm x 24mm Weight: 0.1kg Features: incl. batteries Transmitter Inputs: XLR, Jack 14 kOhm Antenna Connector: TNC Controls: up, set, volume headphone, pad, down, Power, input level Indicators: LC display Operating voltage: 12 - 18 V DC Dimensions Transmitter: 200mm x 44mm x 96mm Weight: 1.2kg Accessories (included): headphones, power supply, antenna, batteries

The U500 series is designed as a conference solution for professional users. Elegant design meets simple operation: Wireless true diversity UHF conference system 662-694 MHz 662-694 MHz Wireless true diversity UHF conferencing system Automatic channel search Automatic frequency search Infrared frequency synchronisation of the receiver and microphone unit Pilot tone Priority switching Automatic and manual gate modes Safety lock RS-232 interface for external control Set consisting of: 1 receiver, 4 microphone unit bases and 4 gooseneck microphones The U500 series is designed as a practical conference solution for professional users. Elegant design meets simple operation: the system uses the latest wireless technology and excellent voice transmission to ensure that meetings, committee meetings and discussions are structured and easy to understand. The U500 microphone units work with a gooseneck condenser microphone in cardioid polar pattern and an illuminated ring for clear status indication. The robust table base features an XLR microphone connection with 28 V phantom power, an on/off/mute button, a gain control and a switchable high-pass filter at 130 Hz, which reduces proximity effects and structure-borne noise. A high-contrast OLED display provides information about the radio frequency, battery, call station number, group and channel. The frequency range is 60 Hz to 16 kHz. For quick commissioning, the 4-channel receiver offers automatic frequency and channel search, IR synchronisation, a digital rotary encoder and four direct selection buttons for the individual channels. The OLED display bundles all relevant parameters - such as audio and radio signal levels, priorities and battery status of the microphone units. To minimise crosstalk, feedback and comb filter effects, you can specify how many microphones can be open at the same time. Selectable automatic or manual gate settings and a pilot tone increase sound quality and operational reliability. In addition to separate channel outputs, a sum output is available; an access lock protects against unauthorised changes, and the system can be integrated into external control systems via RS-232. For larger setups, up to five U500 receivers can be cascaded in a master-slave network - allowing a total of up to 20 intercom stations. Manufacturer information Adam Hall GmbH Adam-Hall-Str. 1 61267 Neu-Anspach Germany info@adamhall.com www.adamhall.com

Features: Manufacturer: LD-Systems Capsule Type: Dynamic Polar Pattern: Cardioid On/Off Switch: Yes Frequency Range from (Hz): 55 Frequency Range to (Hz): 16000 Battery Power: Yes Switchable Pad: Yes Switchable Low Cut: No Clip Microphone: No Swan Neck: No Switchable Frequncies: Yes Frequency Band: UHF Diversity: Yes Detachable antenna: No Wireless System: Universal incl. Clamp: No

4-channel wireless conference system, 1x receiver, 4x microphone bases and 4x gooseneck microphones 4-channel wireless conference system True diversity UHF wireless conference system Automatic channel search Automatic frequency search Infrared frequency synchronization of receiver and microphone unit Pilot tone Priority switching Automatic and manual gate modes Safety lock RS-232 interface for external control Set consisting of: 1 receiver, 4 microphone bases and 4 gooseneck microphones LD-Systems U505 CS 4 at a glance The LD-Systems U505 CS 4 is a wireless true diversity UHF conference system consisting of four microphone units with condenser microphones and a 4-channel receiver. The conference system enables effective communication through excellent voice quality and the use of state-of-the-art technology. With the LD Systems U505 CS 4, your conferences, meetings and discussions are guaranteed to be a success. microphone units The four microphone units of the LD Systems U505 CS 4 have a gooseneck condenser microphone with hypercardioid characteristic and illuminated ring for status indication. In addition to the XLR microphone connector with 28 V phantom power, the heavy table base has a button for on, off and mute, as well as a gain control and a switchable 130 Hz high-pass filter that effectively reduces proximity effect and structure-borne noise. A high-contrast OLED display shows radio frequency, battery status, station number, group and channel. The audio transmission range is from 60 Hz - 16 kHz. 4-channel receiver For fast and convenient system setup, the 4-channel receiver of the LD Systems U505 CS 4 conference system has an automatic frequency and channel search, infrared synchronization, a digital encoder and four buttons for direct access to the individual channels. At the same time, the high-contrast OLED display provides a complete overview of all functions and settings such as audio and radio signal strength or priority and battery level of the microphone units. To suppress crosstalk, feedback and comb filter effects, the number of simultaneously enabled microphones can be specified. The optional automatic or manual gate setting and a pilot tone ensure first-class sound quality and interference immunity of the U500 ® conference system. In addition to individual channel outputs, the receiver has a sum output, an access lock prevents unauthorized changes to the settings, and the RS-232 interface allows integration into external control systems. For system expansion, up to five LD-Systems U500 receivers can be cascaded and operated in master-slave mode, providing a maximum of 20 microphone units. Technical data Modulation type: FM Channels: 106 Radio frequency range: 554 - 586 MHz Groups: 10 Antenna inputs: 2 Antenna connector: BNC Frequency response: 60 - 16000 Hz Noise suppression: Squelch Total harmonic distortion (THD): 100 dB Controls: Digital encoder, Power On/Off, Access keys RX 1 - 4 Audio output...

Features: Manufacturer: LD-Systems Typ: System Signal Processing: Active Battery operation: No Size of Woofer (Inches): 10 Output in W (RMS): 460 max. Peak SPL (dB): 128 Housing Material: Wood Multi-Function Housing: No Flange: M20 Beam angle: 110° Frequency Response from (Hz): 47 Frequency Response to (Hz): 20000 DSP: Yes Input: Combo Socket Output: XLR Integrated Mixer: Yes Mic Input: 4 WLAN: No Bluetooth: Yes RJ45 Interface / Network: No Wheels included: No incl. Stand: Yes incl. Cover: No

The LD-Systems Maui 5 Go White is an 800W (peak) ultra-portable battery-powered column PA system in white, using 24-bit AD/DA DSP. The LD-Systems Maui 5 Go White Active Speaker 800W is the new column system for on the go. The world's first battery-powered column PA is powered by a powerful lithium-ion element that delivers up to 6 hours of battery life (10 hours at half the power). The charger is located in the subwoofer and charges the battery during operation. Inputs for microphone, instruments and line signals as well as Bluetooth® stereo streaming make the MAUI® 5 GO the ideal system for street musicians, for example. The integrated 4-channel mixer offers separate volume controls for input channels, sum and subwoofer as well as variable treble boost for fast and balanced sound adjustment. Due to the low weight of the Maui 5 Go (of only 13kg), the column system is easy and handy to transport. The main features of the LD-Systems Maui 5 Go White include: Lightweight Portable Battery-Powered Column PA Up to 6 Hours Playing Time Bluetooth Stereo Streaming 4-Channel Mixer Low Weight Rechargeable Batteries 28.8V/5200 mAh Battery Manufacturer: LG Chem Battery Technology Lithium-Ion Full Charge Battery Life: 6 Hours @ 120 dB (DJ Mode), 10 Hours @ 104 dB (Live Music), 20 Hours @ 98 dB (Lounge) Charging Time: 2 Hours to 80%, 3 Hours to 100% DSP Features Word Width AD/DA Converter 24/24-Bit 48kHz Internal Sampling Frequency Maui 5 Go

Dual - wireless microphone system with 2 x bodypack and 2 x headset in the frequency range of 584 - 608 MHz, incl. rack mountin... Dual - wireless microphone system with 2 x bodypack and 2 x headset Frequency range 584 - 608 MHz UHF diversity radio systems with FM technology 12 selectable channels 100 meter range under ideal conditions Up to 6 systems can be used simultaneously ASC infrared synchronization of transmitter and receiver Squelch with pilot tone 10 h transmitter runtime with two AA batteries Receiver in sturdy metal housing Rack mounting kit included LD-Systems U305 BPH 2 at a glance The LD Systems U305 BPH 2 is an advanced wireless microphone system designed specifically for professional audio applications. It is part of the renowned U300 series from LD Systems. The wireless microphone system consists of 2 x bodypacks and 2 x headsets. It achieves a range of up to 100 meters under ideal conditions and is designed for operation in the 584 - 608 MHz radio frequency range. Six U300 systems can be used simultaneously. Convenient one-touch synchronization of transmitter and receiver via infrared ensures a fast, trouble-free radio connection, and the squelch with pilot tone ensures interference-free operation. The bodypack transmitter has an output power of 10 mW and runs for 10 hours on two AA batteries. The U300 receiver is equipped with a bright LCD channel display, an LED chain to indicate the audio signal strength and two balanced XLR and two unbalanced 6.35 mm jack outputs. Technical data Bodypack transmitter Frequency response: 25 - 16,000 Radio frequency range: 584 - 608 MHz Channels: 12 Groups: 1 Inputs: Mini-XLR (Phantom Powered Low-Z / High-Z Instrument) RF output power: 10 mW Signal-to-noise ratio: 104 dB Power supply: 2 x AA battery Operating time: >10 hours Weight: 0.085 kg Controls: Gain (3-way switch), Power On/Off Display elements: ASC IR Sync (LED green, flashing yellow), battery (low battery: red), Power LED (Power ON: green) Width: 65 mm Height: 91 mm Depth: 25 mm Other features: belt clip, IR frequency synchronization, pilot tone Headset Frequency response: 20 - 20,000 Polar pattern: Cardioid Nominal impedance: 680 Ohm Phantom power requirements: 5 V Microphone connection: Mini-XLR (3-pin, female) Accessories (included). Foam windscreen Weight: 0.049 kg Dual receiver Modulation type: FM Frequency response: 35 - 16000 Radio frequency range: 584 - 608 MHz Channels: 12 Groups: 1 Antenna inputs: 2 x fixed Noise suppression: Squelch Transmission optimization: Pilot tone Total harmonic distortion (THD): < 0.3 % Signal-to-noise ratio: 104 dB Audio output balanced: 3 x XLR Unbalanced audio output: 6.3 mm jack, switchable unbalanced output level (line/instrument) Audio output Mix balanced: XLR Accessories (included): 2 x AA batteries, mains adapter Audio output Mix unbalanced: 6.3 mm jack Max. Output level: +10 dBu (Bal), +7 dBV (Unbal, Line), +2.5 dBV (Unbal, Instr) dBu Weight: 1.265 kg Controls: 2 x volume, channel down,...