Det hittades 68 produkter som matchar din sökning efter vorsk i 6 butiker:

Extramagasin till Vorsk Hi-Capa modeller, passar även Tokyo Marui och WE. CO2 magasin som rymmer 21st 6mm airsoftkulor

The VORSK VMP-1 is a lightweight, full-polymer Gas-Blow-Back, Airsoft Sub-Machine-Gun that is at home on the skirmish field as it is the CQB arena. VORSK are on a mission to deliver Gas-Blow-Back excellence to the Airsoft Field. Building upon their vast selection of Gas-Blow-Back sidearms, the VMP-1 is their first foray into the world of Sub-Machine-Guns. Announced at IWA 2023 and delivered to stores in the summer, the VMP has attracted a lot of attention due to its compact lightweight design, user friendly features and of course, excellent GBB performance. Lightweight Polymer Receiver Integrated Top Rail Fibre Sights Dual Location 7-Slot Side Rails Spring Centred Buttstock Tilt Mechanism Folding Stock Bespoke Compensator for VORSK VMP Suppressor Colour Matched Magazine Sleeves Reinforced Charging Handle Hop Unit Accessible from Bolt Cover System 7 Hop-Unit, Bucking & Inner Barrel Ergonomic, Compact & Lightweight - Constructed of a durable, lightweight polymer, the VMP-1 makes for an excellent primary in CQB environments. With the buttstock buried into your shoulder and your hands positioned towards the front of the replica, you’ll enjoy a wide yet controlled “sweep” angle, perfect for transitioning around obstacles and room clearances. Those corner transitions are improved further by the 15° tilt-mechanism installed inside the buttstock. This spring-centered tilt enables you to angle your body around a corner whilst holding the VMP-1 straight, reducing the chance of side-sweeping BBs caused by the hop-curve not being parallel with the ground. The stock itself is foldable along the right-hand edge of the VMP-1, simply lift the lock mechanism and rotate into position – “akimbo, anyone?”. The pistol grip features moulded stippling for a secure hold. Green fibre sights are neatly tucked within the 20mm flattop accessory rail. Although difficult to get your eyeline behind when used with the buttstock, the bright fibre sights allow for speedy, instinctive parallax sighting for fast target acquisition. The foldable stock is built into an M4 Stock Tube receiver slot allowing you to refit your VMP-1 with an M4 stock of your choice The Perfect Secondary - Built for the CQB Arena, but certainly capable of competing on the Airsoft Field. The VMP-1 when collapsed is only 345mm in length. With the ability to replace the rear stock with a M4 QD Sling Point and aftermarket holsters on the way, the VMP-1 is a worthy candidate as an explosive secondary for any Sniper/ DMR set ups. But it needn’t be a secondary when out in the wilderness of your nearest skirmish field – the VMP-1 is able to hit targets accurately with a predictable flight path at +30m and an exceptionally high ROF (Rate of Fire), it’ll certainly get you out of a pinch when called upon. 48R Full-Auto Gas-Blow-Back Fun - The VMP-1 is a select-fire Airsoft Sub-Machine-Gun. The fire controls are all in easy reach with the bolt release, magazine release and fire selector all a finger or thumb away from...

Extrmagasin till Vorsk EU pistoler, passar väven Raven EU och WE EU. CO2 magasin, extended modell som rymmer 48rds

Introducing the latest product from VORSK – the VP-X. Removable VORSK Compensator V-Notch Iron Sights/ Raised Fibre Optic Iron Sights High Stipple, Polymer Hand Grip Bespoke MEU Slide incorporating Vertical Slide Grips Functioning Beaver Tail Grip Safety Slide Lock Latch Chrome Inner Barrel The VORSK VP-X is a 1911/MEU Gas-Blow-Back pistol replica that features a bespoke VORSK compensator, VORSK pistol grips and a refined dual-tone colour scheme. All of VORSK pistol designs are passion projects, and the VP-X is no different. Influenced from designs of modern 1911/MEU variants that are found both on the firing range and in pop culture, VORSK have bought another GBB replica to life with the VP-X. A full metal construction finished with a anti-porous, electrostatic finish, the customer has a choice of 8 colour variants including a dual-tone Blue. “Dual Tone” can be considered a theme of this GBB Pistol, with a choice body colour complimented by a secondary colour found on the moderator, trigger, mag-release, hammer, slide-lock and other furniture. These small touches of a secondary colour, scattered across the pistol, result in a very stylish 1911/MEU variant. On top of this, alongside the flagship Black/Chrome double pack, VORSK have also provided a Dual-Tone double pack so everyone can go akimbo with some VORSK VP-X pistols. The slide features two 90° vertical slide grips, a fixed VORSK compensator and V-notch iron sights (standard models) or a VORSK BDS with a bespoke sight mounting plate. All models have a Chrome outer barrel and spring guide, drawing the eye to the barrel extending fixed moderator. New, high stipple VORSK 1911/MEU pistol grips finish off the refined look of this pistol.

Extramagasin till Vorsk Hi-Capa modeller, passar även Tokyo Marui och WE. Gasmagasin som rymmer 21st 6mm airsoftkulor

In keeping with VORSKs desire to offer genuine alternatives to their customers – they have taken the popular EU Series and spun a “Tactical” offering as well as an eye-catching “Vented” option. Fibreoptic Sights / BDS Option Reduced Weight Slide (VENTED) Flared Magwell Extended Magazine Baseplate Fluted Outer Barrel With both EU17 (Semi ONLY) and EU18 (Semi/ Fully Automatic) available, with or without DOT SIGHTs fitted, a TACTICAL or VENTED Slide and 8 colour finishes, there are plenty of EU Series models to choose from. All models are enhanced with design choices not found on standard EU series replicas. Raised fibreoptic iron sights improve target acquisition, VORSKs high-stipple polymer pistol grip ensures a firm grip on those wet & windy days, further improved by the flared magwell. The notch in the magwell flare along with extended magazine baseplates improve reload speeds and finally all models come fitted with a 12 mm CW to 14 mm CCW thread adapter hidden underneath a barrel flash hider/ cover. TACTICAL - The TACTICAL option features a full-weight Aluminium Alloy Slide that features deep-groove ridge cuts on the forward & rear slide sections to help improve slide grip when racking your first BB. Colour choices are more reserved for the TACTICAL options, with all of the furniture & frame remaining black when choosing different slide colours (excluding GOLD & CHROME that have their furniture in the same colour as the slide). VENTED - The VENTED slides distinctive forward vent ports give this EU platform its unique look. These “windows” look unto the fluted outer-barrel that is generally an alternative colour to the slide providing a truly different & eye-catching look. The vent ports also result in some slide weight-reduction which enhances the shooting experience as the recoil cycle is both faster & more “snappy” when compared to standard EU series GBB replicas. As mentioned above, the fluted outer barrel is often a chrome finish, along with the rest of the pistols frame mounted furniture that often results in a “triple-coloured” replica (eg. Tan, Black & Chrome) with some exceptions.

Extramagasin till Vorsk 1911/MEU/VX-9. Gasmagasin som rymmer 21st 6mm airsoftkulor

The VORSK VMP-1 is a lightweight, full-polymer Gas-Blow-Back, Airsoft Sub-Machine-Gun that is at home on the skirmish field as it is the CQB arena. VORSK are on a mission to deliver Gas-Blow-Back excellence to the Airsoft Field. Building upon their vast selection of Gas-Blow-Back sidearms, the VMP-1 is their first foray into the world of Sub-Machine-Guns. Announced at IWA 2023 and delivered to stores in the summer, the VMP has attracted a lot of attention due to its compact lightweight design, user friendly features and of course, excellent GBB performance. Lightweight Polymer Receiver Integrated Top Rail Fibre Sights Dual Location 7-Slot Side Rails Spring Centred Buttstock Tilt Mechanism Folding Stock Bespoke Compensator for VORSK VMP Suppressor Colour Matched Magazine Sleeves Reinforced Charging Handle Hop Unit Accessible from Bolt Cover System 7 Hop-Unit, Bucking & Inner Barrel Ergonomic, Compact & Lightweight - Constructed of a durable, lightweight polymer, the VMP-1 makes for an excellent primary in CQB environments. With the buttstock buried into your shoulder and your hands positioned towards the front of the replica, you’ll enjoy a wide yet controlled “sweep” angle, perfect for transitioning around obstacles and room clearances. Those corner transitions are improved further by the 15° tilt-mechanism installed inside the buttstock. This spring-centered tilt enables you to angle your body around a corner whilst holding the VMP-1 straight, reducing the chance of side-sweeping BBs caused by the hop-curve not being parallel with the ground. The stock itself is foldable along the right-hand edge of the VMP-1, simply lift the lock mechanism and rotate into position – “akimbo, anyone?”. The pistol grip features moulded stippling for a secure hold. Green fibre sights are neatly tucked within the 20mm flattop accessory rail. Although difficult to get your eyeline behind when used with the buttstock, the bright fibre sights allow for speedy, instinctive parallax sighting for fast target acquisition. The foldable stock is built into an M4 Stock Tube receiver slot allowing you to refit your VMP-1 with an M4 stock of your choice The Perfect Secondary - Built for the CQB Arena, but certainly capable of competing on the Airsoft Field. The VMP-1 when collapsed is only 345mm in length. With the ability to replace the rear stock with a M4 QD Sling Point and aftermarket holsters on the way, the VMP-1 is a worthy candidate as an explosive secondary for any Sniper/ DMR set ups. But it needn’t be a secondary when out in the wilderness of your nearest skirmish field – the VMP-1 is able to hit targets accurately with a predictable flight path at +30m and an exceptionally high ROF (Rate of Fire), it’ll certainly get you out of a pinch when called upon. 48R Full-Auto Gas-Blow-Back Fun - The VMP-1 is a select-fire Airsoft Sub-Machine-Gun. The fire controls are all in easy reach with the bolt release, magazine release and fire selector all a finger or thumb away from...

0,40 g Bio kulor från Swiss Arms. 5.95 mm (+/- 0.01 mm) Trippel polerade kulor Tillverkad i Taiwan

Vorsk EU Series and all other models from Vorsk are inspired by the finest and most advanced modern combat and competition handgun designs, VORSK translates these unique and innovative concepts to the Airsoft market in the form of a totally new range of GBB pistols.   VORSKs objective from initial concept to the market has been to provide robust, dependable GBB Pistols whilst also adding a touch of style & flair to your sidearm.   In order to achieve this, VORSK have taken time and care to discuss and develop these concepts with leading Airsoft players and established, successful Airsoft manufacturers. These concepts then moved into extensive development, with new moulds and production techniques ensuring a first class product range.   The final results are a range of GBB pistols that are as effective on the field as they eye-catching on display.

Slingfäste för VMP. Denna produkt för det möjligt att montera SMG'n vapen vapenrem.

0,40 g Bio kulor från Swiss Arms. 5.95 mm (+/- 0.01 mm) Trippel polerade kulor Tillverkad i Taiwan

0,43 g Bio kulor från Swiss Arms. 5.95 mm (+/- 0.01 mm) Trippel polerade kulor Tillverkad i Taiwan

0,32 g Bio kulor från Swiss Arms. 5.95 mm (+/- 0.01 mm) Trippel polerade kulor Tillverkad i Taiwan

he magazines body is a metal construction, with a polymer feed lip, follower and a protective base plate. MEU/VX-9 Series are available with standard Black, or Chrome baseplates to match or customise your sidearms colours. Fuel your VORSK GBB Pistol the way it was designed with VORSKs range of GBB Fuel – V6, V8 & V12 25rds magazine

0,43 g Bio kulor från Swiss Arms. 5.95 mm (+/- 0.01 mm) Trippel polerade kulor Tillverkad i Taiwan

Extrmagasin till Vorsk EU pistoler, passar väven Raven EU och WE EU. Gasmagasin

In keeping with VORSKs desire to offer genuine alternatives to their customers – they have taken the popular EU Series and spun a “Tactical” offering as well as an eye-catching “Vented” option. Fibreoptic Sights / BDS Option Reduced Weight Slide (VENTED) Flared Magwell Extended Magazine Baseplate Fluted Outer Barrel Semi (EU17) or Fully Automatic (EU18) With both EU17 (Semi ONLY) and EU18 (Semi/ Fully Automatic) available, with or without DOT SIGHTs fitted, a TACTICAL or VENTED Slide and 8 colour finishes, there are plenty of EU Series models to choose from. All models are enhanced with design choices not found on standard EU series replicas. Raised fibreoptic iron sights improve target acquisition, VORSKs high-stipple polymer pistol grip ensures a firm grip on those wet & windy days, further improved by the flared magwell. The notch in the magwell flare along with extended magazine baseplates improve reload speeds and finally all models come fitted with a 12 mm CW to 14 mm CCW thread adapter hidden underneath a barrel flash hider/ cover. TACTICAL - The TACTICAL option features a full-weight Aluminium Alloy Slide that features deep-groove ridge cuts on the forward & rear slide sections to help improve slide grip when racking your first BB. Colour choices are more reserved for the TACTICAL options, with all of the furniture & frame remaining black when choosing different slide colours (excluding GOLD & CHROME that have their furniture in the same colour as the slide). VENTED - The VENTED slides distinctive forward vent ports give this EU platform its unique look. These “windows” look unto the fluted outer-barrel that is generally an alternative colour to the slide providing a truly different & eye-catching look. The vent ports also result in some slide weight-reduction which enhances the shooting experience as the recoil cycle is both faster & more “snappy” when compared to standard EU series GBB replicas. As mentioned above, the fluted outer barrel is often a chrome finish, along with the rest of the pistols frame mounted furniture that often results in a “triple-coloured” replica (eg. Tan, Black & Chrome) with some exceptions.

The VX9 features a clean slide with an integrated signature ridge that runs the full length of the top of the slide and integrates the front and rear sights in this distinctive manner. The ridge is integrated into the mould and is one piece and not attached to the slide. We also have custom wood and rubber grips with inlayed rubber texturized sections that wrap around the lower frame/grip. The VX9 also features threaded inner and outer barrels for barrel extension and the included Agency Silencer. Available in silver or black, and as a single model, the VX9 is also available as a “matched pair” in a special box featuring the two pistols, two magazines, and two extended magazines. The Vorsk Agency VX Series and all other models from Vorsk are inspired by the finest and most advanced modern combat and competition handgun designs, VORSK translates these unique and innovative concepts to the Airsoft market in the form of a totally new range of GBB pistols. VORSKs objective from initial concept to the market has been to provide robust, dependable GBB Pistols whilst also adding a touch of style & flair to your sidearm. In order to achieve this, VORSK have taken time and care to discuss and develop these concepts with leading Airsoft players and established, successful Airsoft manufacturers. These concepts then moved into extensive development, with new moulds and production techniques ensuring a first class product range.

Make a statement with VORSKs latest edition to their Hi-Capa range. Reduced Weight Slide – Slide Cut-Outs & Etch Styling Moulded, Stipple Textured VORSK Grip Flared Magwell & Extended Magazine Baseplate 12mm (CW) to 14mm (CCW) Barrel Thread Adaptor 6.03 mm Inner Barrel Fluted Outer Barrel Fibreoptic Sights (BDS Option Available) Hi-Capa – Large Gas Reservoir – Excellent Gas Efficiency Since their launch, the VORSK Hi-Capa models has grown in popularity due to their excellent shot performance and gas efficiency. This high gas efficiency, the result of a large gas reservoir combined with their distinctive weight reduced slides, has been improved further by the introduction of a shortened slide. When the slide is reduced in length, a further weight reduction occurs but also the slides travel distance is shortened. This combination gives the VORSK Hi-Capa PRO a faster cycle rate, snappy trigger action and an enjoyable Blow-Back sensation. Make use of the forward Picatinny Accessory Rail for mounting Torches & Laser units. VORSK Hi-Capas come fitted with a 12mm (CW) / 14mm (CCW) thread adaptor hidden under a cover making the VORSK Hi-Capa ready for a series of Barrel Attachments. The 6.03mm inner barrel is threaded, making it ready for the barrel extending VORSK AGENCY suppressor. Electronic Dot Sight or Fibre Sights options are available in a series of colours.