144 products were found matching your search for stamos in 3 shops:

The bench power supply S-LS-34 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED screen, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 5 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

If You Would Have Told Me. Hardback. By John Stamos

The laboratory power supply S-LS-99 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. It is also equipped with a 5-V USB interface. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee a safe operation of the power supply, even with intensive and permanent use. The device also has a summing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment.

The bench power supply S-LS-58 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high adjustment and display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 1 mV / 1 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.

The bench power supply S-LS-35 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply is very quiet and is perfect for use in schools or for hobbies. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED display, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to individually adjust the desired current. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

The bench power supply S-LS-59 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 2 mV / 5 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.

The bench power supply S-LS-81 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 64 V DC and 0 to 5 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also equipped with a handle and can also be used as a mobile unit thanks to its light weight. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

Use the Stamos Welding Group welding clamps on metal elements to ensure a strong magnetic connection between the individual work pieces. The robust magnetic brackets can be attached at different angles to provide optimum support for two metal parts during welding, soldering or professional assembly work. With this set, you get four of these practical helpers at your fingertips. The arrow-shaped design of the welding magnets allows you to work multifunctionally in different positions. Position the welding magnets at either 45, 90 and 135°. Optimally align your work pieces according to your individual requirements. With their extremely strong magnetic connections, the welding brackets ensure that you tack different metal components together quickly and accurately. This way, you can place the work pieces into the desired position in relation to one another and coordinate them perfectly before processing. Thanks to the strong hold force of up to 25 kg, the magnetic brackets are ideally suited as a binding link between heavy metal components. Plates, tubes and other metal elements can be easily stapled together. This way, you always have both hands free to concentrate on your metalwork. The set of 4 magnetic welding holders have been equipped with a solid steel casing which guarantees high durability and resilience. The robust steel work ensures continuous dimensional stability, so that the welding angles fit perfectly even under pressure. The easy-care material is simply wiped clean.

Welding requires many accessories in addition to the welder. Depending on the model and the welding method, this may be a foot pedal, a gas tank, a slag brush, ceramic sleeves, electrodes or even a cutting nozzle. With the mobile welding cart SWG-WC-2 from Stamos Germany, you always have everything you need at hand. Three drawers provide additional storage space and bring order to your welding equipment. Three drawers offer you plenty of place of your equipment, more specifically your welding accessories. The uppermost shelf offers a horizontal surface of 45 x 31 cm for larger objects. Smaller accessories are ideally placed on the middle shelf, where the surface is 38.8 x 28.8 cm. In addition, there are practical brackets on both sides, where you can hang cables and hoses. Two large rear wheels and the two agile front wheels, which can be rotated 360 degrees, ensure a perfect mobility. All your utensils can be safely transported on and in the welding cart, and in cramped working conditions in the workshop or on a construction site, the cart has an extremely high manoeuvrability. So, with the comfortable handle you can move the welding cart safely and precisely. Many welding methods such as WIG or MIG / MAG welding require a gas tank. The welding cart has a special space where the bottle can be safely placed and fastened with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. You can transport your welder and welding equipment up to a total weight of 75 kg. The instruction manual helps you to assemble the welding cart and the drawers without much effort.

On the welding trolley from the professional tools collection of the Stamos Welding Group, your welding machine, gas cylinder and all welding accessories are always at hand. The three shelves with a total weight capacity of 80 kg provide plenty of space for everything you need for welding. Even when you change welding locations, the mobile welding cart is easy to take along so you will be perfectly equipped for your next welding task. The MIG welder cart's three levels provide plenty of space for all your equipment and welding accessories. The top level is slightly angled and at 45.5 x 27.6 cm suited for larger objects. Smaller accessories can be placed on the middle shelf, which measures 38.4 x 27.2 cm. In addition, there are practical brackets on both sides where you can hang cables and hoses. Two large rear wheels and the two manoeuvrable front wheels, which can be rotated 360 degrees, ensure perfect mobility. The wheels enable you to safely transport all the tools on the steel welding cart. The welding machine cart convinces with its extremely high manoeuvrability even in cramped conditions in the workshop or on the construction site. Many welding methods such as TIG or MIG / MAG welding require a gas cylinder. The welding cart has a special space on the bottom shelf where a cylinder can be safely placed and fastened with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. With this cart, you can transport your welder and welding equipment up to a total weight of 80 kg. The welding cart can be easily assembled by following the instructions in the manual.

Welding requires many accessories in addition to the welder. Depending on the model and the welding method, this may be a foot pedal, a gas tank, a slag brush, ceramic sleeves, electrodes or even a cutting nozzle. With the mobile welding cart SWG-WC-3D from Stamos Germany, you always have everything you need at hand. Three drawers provide additional storage space and bring order to your welding equipment. Three drawers with internal dimensions of 39 by 20 centimetres and a large shelf of 45 by 30 centimetres offer a lot of storage space for all your equipment and welding accessories. The drawers also allow you to arrange your equipment neatly, so that you can quickly find everything you need. In addition, there are practical brackets on both sides, where you can hang cables and hoses. Two large rear wheels and the two agile front wheels, which can be rotated 360 degrees, ensure a perfect mobility. All your utensils can be safely transported on and in the welding cart, and in cramped working conditions in the workshop or on a construction site, the cart has an extremely high manoeuvrability. Many welding methods such as WIG or MIG / MAG welding require a gas tank. The welding cart has a special space where the bottle can be safely placed and fastened with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. You can transport your welder and welding equipment up to a total weight of 75 kg. The instruction manual helps you to assemble the welding cart and the drawers without much effort.

There is an increased risk wherever sparks or glowing metal splinters fly during welding or grinding work. That's why neither professionals nor hobbyists should ever be without the professional welding curtain SWS04 from the professional tools line by the Stamos Welding Group. The 239 x 175 cm welding curtain made of flame-retardant vinyl plastic is easily affixed to the included tubular steel frame by the 28 eyelets installed around the edges with cable ties or hooks. Due to its material thickness of 0.4 mm, the 240 x 180 cm welding screen offers effective protection against flames, bright arcs and infrared and UV rays. The high-quality premium thread is particularly heat-resistant and flame retardant, so flying sparks and glowing metal spatter won't damage the seams. In addition, thanks to four 360° swivel castors, the mobile and easily adjustable weld curtain shields your workplace from moisture, draughts, sunlight and dirt and, if required, also acts as a room divider. The vinyl welding curtain complies with the DIN standard EN ISO 25980 for occupational health and safety during welding and related processes and can therefore be used as a professional protection measure. Buy a welding curtain today and get the ideal protection for heat-intensive metalwork. The Stamos Welding Group range also includes other protective equipment such as helmets, jackets, gloves and aprons for welders.

You can effectively counteract high heat, weld spatters and sparks with the right welding jacket that meets professional standards. But of course this jacket will also keep you safe from burns even if you only occasionally pick up a welding gun. The high-quality welding jacket in size M provides excellent protection for your upper body and arms, as well as your clothing, during welding. The comfortably-fitting jacket does not restrict your freedom of movement. Most importantly, however, it prevents heat, spattering slag or sparks from causing you serious and highly painful injury. In addition to high-quality materials, first-class workmanship is also of central importance when it comes to a welders jacket. Heat-resistant threads were used for all the seams in this leather welders jacket. These are not only extremely tear- and tension-resistant, but also flame-resistant and heat-resistant. Even after intense, constant use, the split cow leather used for this leather welding jacket guarantees excellent durability even with heavy daily use. The snap fasteners are insulated against electric shocks, making this welding safety jacket ideal for work with electrical equipment such as welders or plasma cutters. Additional Velcro fasteners ensure a secure fit on the body. If necessary, you can fold up the colour-contrasting collar of the gold protective jacket. The welding jacket is also equipped with two practical inner pockets as well as two small pockets on the sleeves. This welding jacket provides reliable protection for all kinds of welding work, including MMA, MIG/MAG, TIG, microplasma, spot and inert-gas welding, as well as plasma cutting and torch cutting. The leather welders jacket complies with EN standard ISO 11611:2007, protection class 2, fire protection A1.

The gas cylinder for TIG or MIG/MAG welding is just one component that can be transported with a welding cart. You can also keep additional accessories such as a slag brush, ceramic sleeves, electrodes or a cutting nozzle close at hand on the mobile welding cart S-WECA-1. The three shelves give you plenty of space to store everything ready to hand for welding. Three storage shelves offer plenty of space for all your equipment and welding accessories. The top level is slightly angled and, at 33.3 x 53.2 cm, is suited for larger objects. Smaller accessories can be placed on the middle shelf, which measures 33.5 x 51.5 cm. In addition, there are practical brackets on both sides where you can hang cables and hoses. Two large rear wheels and the two manoeuvrable front wheels, which can be rotated 360 degrees, ensure perfect mobility. The wheels enable you to safely transport all the tools on the welding trolley. The welding machine cart convinces with its extremely high manoeuvrability even in cramped conditions in the workshop or on the construction site. The welding machine trolley's comfortable handle allows for safe and precise manoeuvring. Many welding methods such as TIG or MIG/MAG welding require a gas cylinder. The welding cart has a special space on the bottom shelf where a cylinder can be safely placed and secured with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. With this cart, you can transport your welder and welding equipment with a total weight of up to 65 kg . The welding cart can be easily assembled by following the instructions in the manual.

Alongside a helmet and gloves, no welding equipment is complete without a welding jacket. You can effectively counteract high heat, weld spatters and sparks with protective clothing that meets professional standards. But of course this jacket will also keep you safe from burns even if you only occasionally pick up a welding torch. The high-quality welding jacket in size XXL provides excellent protection for your upper body and arms, as well as your clothing, during welding. The safe leather welding jacket is made of high-quality cow split leather and meets all the requirements for working with a welding machine. The comfortably-fitting jacket does not restrict your freedom of movement. Most importantly, however, it prevents heat, spattering slag or sparks from causing you serious and highly painful injury. In addition to high-quality materials, first-class workmanship is also of central importance when it comes to a welders' protective clothing. High-quality synthetic fibres were used for all the seams in this welders jacket. These are not only extremely tear and tensile resistant, but also flame-resistant and heat-resistant. Even after intense, constant use, the split cow leather used guarantees excellent durability. This is thanks to the special robustness against the various causes of wear and tear such as abrasion or dangerous sparks. Another advantage of these heat-resistant and fire-retardant welding jackets is the non-conductive snap fasteners, which are insulated against electric shocks. For this reason, the protective clothing is ideally suited for working with electrical equipment, such as welding equipment, but also with plasma cutters. Additional Velcro fasteners ensure a secure fit on the body. The durable welding jacket from Stamos Welding's welding accessories is comfortable to wear despite its professional protective function, so that you can move comfortably and unrestrictedly during work. The welding jacket is also equipped with two practical inner pockets as well as two small pockets on the sleeves. If necessary, you can fold up the neon-orange and padded collar, which contrasts pleasantly with the khaki colour of the rest of the jacket. With this ingenious addition you can better protect your neck area in no time, as well as insulate yourself from chilly breezes if needed. This welding jacket provides reliable protection for all kinds of welding work, including MMA, MIG/MAG, TIG, microplasma, spot and inert-gas welding, as well as plasma cutting and torch cutting. The leather welders jacket complies with EN standard ISO 11611:2007, protection class 2, fire protection A1.

Your welding equipment, gas cylinder and all welding accessories are always at hand on the welding cart from the Stamos Welding Group's professional tools collection. The three shelves with a total weight capacity of 80 kg provide plenty of space for everything you need for welding. Even when you change welding locations, the mobile welding cart is easy to take along so you will always be perfectly equipped for your next welding task. The MIG welder cart's three levels provide plenty of space for all your equipment and welding accessories. The top level is slightly angled and at 45 x 27 cm suited for larger objects. Smaller accessories can be placed on the middle shelf, which measures 38 x 27 cm. In addition, there are practical brackets on both sides where you can hang cables and hoses. Two large rear wheels and the two manoeuvrable front wheels, which can be rotated 360 degrees, ensure perfect mobility. The wheels enable you to safely transport all the tools on the steel welding cart. The welding machine cart convinces with its extremely high manoeuvrability even in cramped conditions in the workshop or on the construction site. Many welding methods such as TIG or MIG / MAG welding require a gas cylinder. The welding cart has a special space on the bottom shelf where a cylinder can be safely placed and fastened with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. This allows you to use the trolley to transport accessories in addition to the welding machine – everything up to a total weight of 80 kg. The welding cart can be easily assembled by following the instructions in the manual.

The SWS02 welding screen consists of a welding curtain and a rack on wheels. The welding screen protects your surroundings from bright light, sparks and spatter. With its stable frame made of black painted steel, this device allows you to safely work in a variety of locations. Whether hobbyist or professional, the welding accessories from Stamos Germany enrich any workshop. The curtain is made of a special vinyl plastic, and its thickness of 0.4 mm offers optimal protection from light, sparks and spatter. The material is particularly UV resistant and also serves as flame protection when welding or grinding. Thanks to the high-quality synthetic threads used in the welding curtain, all seams are particularly heat and flame-resistant. With its generous dimensions of 239 x 175 cm, the vinyl welding protection screen offers plenty of space to protect a large area in your professional workplace. Because the weld curtain also protects against drafts, dirt, wet and solar radiation, it can be used in a variety of ways in your workshop. The four 360° wheels provide excellent mobility. The two built-in brakes ensure safety and stability even on sloping or uneven surfaces. The frame made of 2.2 cm-thick tubing provides the perfect conditions for safe work even in unusual environments. All sides of the curtain are equipped with practical ring grommets. The welding curtain complies with the tested standard EN ISO 25980 and can therefore be used as a professional safety curtain. The welding screen provides optimal protection for a variety of welding and grinding tasks, so you can always work safely and efficiently.

Welding requires many accessories in addition to the welder. Depending on the model and the welding method, this may be a foot pedal, a gas tank, a slag brush, ceramic sleeves, electrodes or even a cutting nozzle. With the mobile welding cart SWG-WC-3D from Stamos Germany, you always have everything you need at hand. Three drawers provide additional storage space and bring order to your welding equipment. Three drawers with internal dimensions of 39 by 20 centimetres and a large shelf of 45 by 30 centimetres offer a lot of storage space for all your equipment and welding accessories. The drawers also allow you to arrange your equipment neatly, so that you can quickly find everything you need. In addition, there are practical brackets on both sides, where you can hang cables and hoses. Two large rear wheels and the two agile front wheels, which can be rotated 360 degrees, ensure a perfect mobility. All your utensils can be safely transported on and in the welding cart, and in cramped working conditions in the workshop or on a construction site, the cart has an extremely high manoeuvrability. Many welding methods such as WIG or MIG / MAG welding require a gas tank. The welding cart has a special space where the bottle can be safely placed and fastened with two chains. On the shelf above the two large wheels, the gas tank is easy to reach and can be easily removed or replaced, for example when changing the welding method. The welding cart is characterized by a very stable construction and is made of durable, black lacquered steel. You can transport your welder and welding equipment up to a total weight of 75 kg. The instruction manual helps you to assemble the welding cart and the drawers without much effort.

The laboratory power supply S-LS-103 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. The memory function and RS485 interface make the use of this device particularly effective. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. There are four memory spaces for frequently-repeated current values, so you can easily call them up again. You can connect the device to a computer via a RS485 interface using the Modbus communication protocol. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs and buttons. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. Furthermore, the power supply unit has a control panel lock to prevent accidental changing of the set parameters. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overvoltage protection (OVP), an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee safe operation of the power supply, even with intensive and permanent use. The device also has a buzzing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment. Download software

The Stamos Welding Group welding angles are used on metal elements to ensure a strong magnetic connection between the individual work pieces. Switch them on or off again via a switch. The robust magnetic brackets can be attached at different angles to provide optimum support for two metal parts during welding, soldering or professional assembly work. With this set, you get four of these practical helpers at your fingertips. The arrow-shaped design of the welding magnets allows you to work multifunctionally in different positions. Insert the welding magnets into a position of 45° and 90°. Optimally align the work pieces according to your individual requirements. Activate the extremely strong magnetic connection with the help of a switch, and deactivate the welding magnets using that same switch. If they are not yet active, align the work pieces to each other more easily. Once in the desired position, activate the magnets, which will be held securely. The strong magnetic connection then offers you maximum safety during use. Thanks to the strong hold force of up to 55 kg, the magnetic brackets are ideally suited as a binding link between heavy metal components. Plates, tubes and other metal elements can be easily stapled together. This way, you always have both hands free to concentrate on your metalwork. The magnetic welding angles have been equipped with a solid steel casing which guarantees high durability and resilience. The robust steel work ensures continuous dimensional stability, so that the welding angles are fit perfectly even under pressure. If you deactivate the magnetic force of the welding magnets, you can remove residue such as metal chips or similar.