791 products were found matching your search for actuator in 2 shops:

Warranty: 2 years application: Actuator Bulb Type: NVT Operating Mode: Electric

Flush-mounted actuator for controlling venetian blinds, roller shutters and awningsEnables precise adjustment of the slat position for external venetian blinds or shuttersConvenient operation via the Homematic IP app, via Homematic IP remote control, via ALEXA or directly via the pushbutton rocker of the switch Suitable for all common tubular motorsIndividual configuration of a weekly profile enables time-controlled raising and lowering of blinds/shutters and adjustment of the slat positionConvenient control depending on sunrise and sunsetLock-out, storm and heat protection can be implemented in combination with the Homematic IP app and other componentsCompact design for installation in standard flush-mounted boxesIntegration also in existing switch series by using existing frames and rockersCan be integrated into the most common designs of leading switch manufacturers with the appropriate adapter: Busch-Jaeger, Gira, Merten, Berker, Jung, düwi, KoppA neutral conductor must be available for installationCan be used with the access point in conjunction with the Homematic IP app (without follow-up costs)

Warranty: 2 years application: Actuator Bulb Type: NVT Operating Mode: Electric Performance: for vehicles without Xenon light Manufacturer Restriction: Typ Valeo

Warranty: 2 years application: Actuator Bulb Type: NVT Operating Mode: Electric Observe technical data Socket colour: Black

Bulb Type: NVT application: Actuator Warranty: 2 years Operating Mode: Electric Performance: for vehicles without Xenon light

application: mounting material Bulb Type: NVT Warranty: 2 years Operating Mode: Electric Length [mm]: 139.5 Width [mm]: 71.5 Angle of Angle [Â °]: 198 Number of poles: 2

Warranty: 2 years application: Actuator Bulb Type: NVT Operating Mode: Electric Technical Information Number: KMH.... Vehicle Production Country: Republic of Korea (South Korea)

Warranty: 2 years Bulb Type: NVT application: Actuator Operating Mode: Electric

Thanks to the high measuring accuracy even stand-by loads can be precisely measuredCompact design offers easy installation in flush-mounting boxes or in surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25)Comfortable control via Homematic IP app and via Homematic IP Remote ControlCan be used with the Home Control Access Point in connection with the Homematic IP app, the HomematicCentral Control Unit CCU2 as well as with various partner solutionsThe Homematic IP Switch Actuator and Meter is part of the Homematic IP smart home system and offers switching of loads with a maximum power consumption of 1150 Watt as well as detection of the energy consumption. Thanks to its compact design, the actuator not only fits into standard flush-mounted boxes. It is also suitable for surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25) with IP65 as well. In this way, the switch actuator and meter is also suitable for operation in damp basements or outdoor areas. The minor variations in measurement accuracy of only +/- 0,03 W ensure that also low consumption like the energy consumption can be precisely determined. The device can be controlled e.g. via the free Homematic IP app or Homematic IP Remote Control.

With the Homematic IP dimming actuator for brand switches, the existing luminaire system can be easily integrated into a Homematic IP Smart Home system. Thanks to its compact design, the dimming actuator fits comfortably in standard flush-mounted sockets. Already existing switches can be replaced with just a few simple steps if, in addition to the phase, a neutral conductor is also available in the flush-mounted box. Since the actuator is a phase section dimmer, it is particularly suitable for classic incandescent lamps, HV halogen lamps, NV halogen lamps with electronic transformer, for dimmable energy saving lamps and dimmable LED lamps. The maximum switching capacity is 80 VA. Immediately after commissioning, the light output can be dimmed comfortably in 0.5% steps via the free Homematic IP app. Of course, the classic operation by wall button is also retained. Due to the numerous adapter plates available, the dimmer actuator can also be used in the most common switch designs of Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi and Kopp. The standby power consumption is low 0.4 W.Via the Homematic IP app, connected luminaires can be dimmed almost continuously in 0.5% stepsLow Standby Current ConsumptionCompact design for installation in standard flush-mounted socketsIntegration into existing switch series by using existing frames and rockersCan be integrated with the appropriate adapter in the most common designs of leading switch manufacturers: Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi, KoppReliable operation from a minimum load of 3 VAA neutral conductor must be present for installationCan be operated with the Access point in conjunction with the Homematic IP App, the Homematic Control Center CCU2 as well as with many partner solutions, such as ALEXA

The metering function reliably detects switched-on devices - therefore, the switch actuator and meter can be used in existing cross and two-way circuitsComfortable control via Homematic IP app and via Homematic IP Remote ControlCompact design for installation in standard flush-mounting boxesCan also be integrated into existing switches by making use of existing frames and rockersWith the appropriate adapter, the device can be integrated into the most popular switch designs of leading manufacturers: Busch-Jaeger, Gira, Merten, Berker, Jung, düwi, KoppA neutral conductor is required for installationCan be used with the Access Point in connection with the Homematic IP app, the Homematic Central Control Unit CCU2 as well as with various partner solutionsThe Homematic IP Switch Actuator and Meter for brand switches is part of the Homematic IP smart home system. With the actuator, ohmic loads with a maximum power of 1150 W can be switched traditionally via wall-mount remote control or easily using the free Homematic IP app. Furthermore, the corresponding power consumption can be detected. Thanks to its compact design, the switch actuator and meter comfortably fits into standard flush-mounted boxes. The existing switches can be replaced in only a few single steps if, next to the phase conductor, also a neutral conductor is available in the flush-mounted box. The integrated metering function reliably detects switched-on devices - therefore, the switch actuator and meter can be used in existing cross and two-way circuits. Thanks to various adapters available, the dimming actuator can be integrated into the most common brand switch systems of Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi and Kopp. The standby power consumption is approximately only 0.2 W.

Flush actuator for the control of roller shutters and awningsConvenient operation via the HomeMatic IP app or via HomeMatic IP remote controlIndividual configuration of a weekly profile allows time-controlled startup and shutdown of roller shutters/awningsConvenient control depending on sunrise and sunsetSuitable for all common tubular motorsConnection of two standard pushbuttons via screwless clamps for local operationCompact design for easy installation in flush-fitted sockets or in surface-mounted splitter boxes (e.g. ELS Spelsberg Abox 25, IP65), for example for use in basementsA neutral conductor must be present for the installationCan be used with the Access Point in conjunction with the HomeMatic IP app (without any follow-up costs), the HomeMatic CCU2 central control unit, or with many different partner solutions such as ALEXA

The Homatic IP Dimmer Flush Mount is part of the Homematic IP Smart Home System and can be used for switching lights on, off and dimming. The dimming actuator is compact, so it can be conveniently placed in standard flush-mounted or surface-mounted sockets. Existing lighting systems can thus be modernized with just a few simple steps by using existing cables and in future controlled by radio via a remote control, a wall switch or the free smartphone app. Since the actuator is a phase section dimmer, it is suitable for classic incandescent lamps, halogen lamps, for dimmable energy saving lamps as well as for most dimmable LED lamps. The fully electronic phase section dimmer has been specially optimized for energy-saving lamps, whose switching capacity is between 3 and 80 VA. The modern electronics make operation possible without any noise emission. If the dimmer is integrated into a Homematic IP system, the light output can be dimmed comfortably in 0.5% steps.Optimized for modern light sources and therefore particularly suitable for small loads (e.g. LED)Modern, fully electronic phase section dimmer for particularly quiet operation without noise (compared to older dimmers)Via the Homematic IP app, connected luminaires can be dimmed almost continuously in 0.5% stepsLow Standby Current ConsumptionCompact design for easy mounting in flush-mounted boxes or in surface-mounted distribution boxes (e.g. ELS Spelsberg Abox 25, IP65) for use in basement or outdoor areasScrew-free terminals for particularly easy mountingConvenient control via the Homematic IP app or via Homematic IP remote controlCan be operated with the access point in conjunction with the Homematic IP app (without additional costs), the Homematic headquarters CCU2 as well as with many partner solutions, such as ALEXA

The mains-operated radio switch actuator-featuring two buttons-can be used flexibly to control a connected consumer or as a signal/orientation lightSimple and flexible control of connected lights using the integrated buttons, the motion sensor or the remote control, as well as via the free Homematic IP smartphone appThanks to the integrated LED signal lights, each button can be backlit independently, either white or in colour, allowing different functions to be set, e.g. signal/orientation lightIn conjunction with taught-in Homematic IP devices, the switch actuator can be used, for example, on a compatible washing machine as a signal light to indicate alarm statuses, eco mode or an open doorThe colour and brightness of the LED signal lights can be conveniently customised via the Homematic IP appCompact design for installation in standard flush-fitted sockets Can also be integrated into existing switch series with 55-mm frames by using the existing frameA neutral conductor must be available for installation Operation requires the Homematic IP Access Point in conjunction with the free app (cloud service with no associated charges), the CCU2/CCU3 central control unit or a suitable partner solution.Included in deliveryHomematic IP switch actuator for brand switches-with signal lightRemovable framePower supply inputScrews 3.2 x 15 mm (2x)Screws 3.2 x 25 mm (2x)User manual

The Homematic IP blinds actuator for DIN rail mounting with four channels controls up to four blinds, roller shutters or awnings directly from the distribution board and is ideal for retrofitting thanks to radio communication.The smart control of conventional pipe motors enables, for example, a relaxed wake-up call in the morning or additional security at dusk. In addition to roller shutters and awnings, the smart actuator also controls the slat position of blinds or Venetian blinds. The shading elements can be controlled automatically via time profiles or depending on sunrise and sunset via individual automation.

Universal switch actuator for switching circulator pumps, boilers, electric radiators and other consumers via two channelsIntelligently switching the heating system means that the heat supply can be controlled according to demand, resulting in the more efficient use of heating energy.The integrated time profile allows you to quickly and easy specify times periods in line with demand for hot water (e.g. every morning and evening).Can be used alongside radiator thermostats or underfloor heating actuators as a heat demand relay for controlling circulator pumps.Easy and flexible mounting using the screws provided.Operation requires a connection with one of the following solutions:Homematic IP Access Point with free smartphone app and free cloud serviceCCU2/CCU3 control panel with local WebUI user interfacePartner solutions from third-party providers

Open the door to a Smart homeNever want to have to find your keys again? The intelligent door lock drive from Homematic IP means you'll never have to! You can unlock, lock and open doors conveniently and safely via a smartphone, remote control or voice control. The Homematic IP app keeps thean eye on the front door at all times.

The particularly narrow switch actuator with a width of only 1 TE can be easily installed on a DIN rail to switch a channel from the distribution cabinet. This makes the device ideal for replacing shock switches.Suitable for many consumers:Resistive LoadsIncandescent lamps (1500 W per channel)Lamps with internal ballast (LED/compact fluorescent lamp) (200 W per channel)HV halogen lamps (1500 W per channel)LV halogen lamps with electronic or iron core transformer (1500 W per channel)Fluorescent lamps uncompressed or parallel compensated (1500 W per channel)Electrical radiators and heating systems (8 a, 200,000 operations per channel)Two functions in oneThe switch actuator not only enables the convenient switching on and off of a connected lamp via an independent channel, but also the replacement of a conventional shock switch.Convenient InstallationMounting on standard DIN rails is particularly easy thanks to spring-loaded terminals. Even without programming, the function and wiring can be checked directly on the device during installation thanks to the illuminated display and the device buttons.Flexible OperationThe connected lamp can be flexibly controlled via radio buttons or remote controls as well as at any time via the Homatic IP app (e.g. via time profiles). Alternatively, manual operation via conventional, wired buttons is also possible. The added value for a smart homeAlso for extensions (e.g. Attic) as well as suitable for retrofitting. Can be easily installed in the distribution cabinet and does not take up much space thanks to the compact housing. No room-level installation intervention required. Existing switches and buttons can be used easily.

Wireless light actuator 10 A/250 V ACImpulse switch with 1 NO contact, potential free.230 V incandescent and halogen lamps 1000 WESL and 230 V LED lamps up to 200 W stand-by loss only 0.4 wattFor recessed mounting49 x 51 mm, 20 mm deepThe connecting terminals are plug-in terminals for conductor cross sections from 0.2 mm² to 2.5 mm².With the comfortable inching technology, up to 32 radio universal pushbuttons, radio direction switches, radio central control pushbuttons and motion sensors can be taught-in.Bidirectional radio can be activated.Distance control connection/contact 6 mm.Local supply, switching and control voltage 230 V.If the supply voltage fails, the switching position is maintained. When the supply voltage returns, the machine is switched off in a defined manner. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains.In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional 230 V control button that may have been mounted in front of it.A glow lamp current is not permitted.

Flush-mounted actuator for controlling roller shutters and awnings.Convenient operation via the Homematic IP app, via Homematic IP remote control or directly via the pushbutton rocker of the switchSuitable for all common tubular motorsIndividual configuration of a weekly profile enables time-controlled raising and lowering of shutters/ awningsComfortable control depending on sunrise and sunsetLock-out, storm and heat protection can be implemented in combination with the Homematic IP app and other componentsCompact design for installation in standard flush-mounted boxesIntegration also in existing switch series by using existing frames and rockersCan be integrated into the most common designs of leading switch manufacturers with the appropriate adapter: Busch-Jaeger, Gira, Merten, Berker, Jung, düwi, KoppA neutral conductor must be available for installationCan be used with the access point in conjunction with the Homematic IP app (no follow-up costs)Installation only in switch boxes (device boxes) according to DIN 49073-1