42031 products were found matching your search for applications in 4 shops:

A successful job application is one of the most important things in life. DURASWING® JOB application folders highlight your professionalism.Clip folder made of coloured polypropylene film with ''BEWERBUNG'' inscriptionFolder with high-quality plastic clip that swivels to the side for safely storing application documentsCapacity: 1 - 30 A4 sheets

application: Application set Colour: N / A Guarantee: 2 years

A successful job application is one of the most important things in life. DURASWING® JOB application folders highlight your professionalism.Clip folder made of coloured polypropylene film with ''BEWERBUNG'' inscriptionFolder with high-quality plastic clip that swivels to the side for safely storing application documentsCapacity: 1 - 30 A4 sheets

A successful job application is one of the most important things in life. DURASWING® JOB application folders highlight your professionalism.Clip folder made of coloured polypropylene film with ''BEWERBUNG'' inscriptionFolder with high-quality plastic clip that swivels to the side for safely storing application documentsCapacity: 1 - 30 A4 sheets

A successful job application is one of the most important things in life. DURASWING® JOB application folders highlight your professionalism.Clip folder made of coloured polypropylene film with ''BEWERBUNG'' inscriptionFolder with high-quality plastic clip that swivels to the side for safely storing application documentsCapacity: 1 - 30 A4 sheets

With this tool by Delock a network cable can be quickly and easily connected to a patch panel or network outlet. When the wire is contacted, the excess cable end is cut off.Specification For LSA and 110 IDC connectorsFor solid or stranded wire up to 0.644 mm (22 - 26 AWG)With sensor and scissors (cutting lock)Integrated wire hook and screwdriver bladeColour: greyDimensions (LxWxH): ca. 185 x 35 x 25 mmPackage content Punch down tool

The 6159 GR floor stand is sturdy, stylish and easy to handle. Assembly is very easy and intuitive with just one screw. The grey application on the top fits perfectly with the 7213GR/7215GR/7218 GR/8213GR/8215GR series. Applications:The four castors allow the floor stand to be moved easily and allow flexible working.Technical dataOverall height 69.5 cmWide stand base [diameter] 39 cmWeight 11.28 kgRoller dimensions [mm] 35x30Frame colour whiteApplication colour grey

The new digital multimeter Fluke 27 II sets new standards as regards use in adverse circumstances and features the required accuracy when troubleshooting electrical equipment. The meter is specified in accordance with IP 67 (water and dust resistant) and approval by MSHA is pending.• AC and DC voltage measurement up to 1000 V• Measurements up to 10 A (20 A for 30 seconds)• Capacitance range: 10,000 µF• Frequency up to 200 kHz• Expanded bandwidth for DC voltage measurement 40 Hz to 30 kHz• Resistance measurement, continuity test and diode test• Min/max and average recording to capture variations automatically• In accordance with IP67, water and dust-proof and completely sealed for use in harsh environments• Designed to survive a 3 metre fall (with holster)• Average recording of voltage and power during measurements• Improved readability even in dark environments with backlit buttons• Improved readability thanks to large display digits and a two-stage bright backlight• Additional protection with inverted insertion into the holster when the device is not in use• Resistant to dangerous voltage spikes of up to 8000 V, which can occur when switching loads and with a switch circuit error in industrial plants. The device meets the conditions of the electrical safety standards of the IEC and ANSI (in each case, 2nd edition).• Long battery life (800 hours).• Relative value mode to remove the measuring line resistance with low-impedance measurements• Auto and manual range selection for maximum flexibility• Easy to read and set up thanks to the optional magnet holder - your hands remain free for other tasks• MSHA approval for mining applicationsTechnical data:DC voltage: 0.1 mV to 1,000 V / ±0.1% + 1 digitAC voltage: 0.1 mV to 1,000 V / ±0.5% + 3 digitsDC measurement: 0.1 µA up to 10 A / 0.2% + 4 digitsAC: 0.1 µA up to 10 A / 1.5% + 2 digitsResistance measurement: 0.1 ohm to 50 MohmDisplay range: 6,000 countsCapacitance measurement: 1 nF to 9999 µFFrequency measurement: 0.5 Hz to 199.99 kHzSafety according to EN 61010: CAT IV 600 V, CAT III 1000 VIP specification: IP 67Power supply: three AA batteriesBattery life: 800 hoursBar chart/BacklightMin/max/average value: yesMeasurement hold function: yesRelative measurement (zero setting): yesSize (H x W x L) with holster: 6.35 cm x 10.0 cm x 19.81 cmWeight with holster: 698.5 g

Emergency Stop for hygienic applicationshygienic certificated DIN EN 1672-2 / DIN EN ISO 14159 and GS-NV 3, GS-NV 6Faston Clamp 2,8 x 0,8 mmTamper-proof: yesSwitch position indicator: noAnti-lock collar: nounlocking: Right and left switschingNorm: EN 60947-5-1, EN 60068-2-1/-2-2/-2-30, EN 60947-5-5, EN ISO 138502x NCframe: yellow

The new digital multimeter Fluke 28 II sets new standards as regards use in adverse circumstances and features the required accuracy when troubleshooting electrical equipment. The meter is specified in accordance with IP 67 (water and dust resistant) and approval by MSHA is pending.• AC and DC voltage measurement up to 1000 V• Measurements up to 10 A (20 A for 30 seconds)• Capacitance range: 10,000 µF• Frequency up to 200 kHz• Extended bandwidth for AC voltage measurement - 15 Hz to 20 kHz• Thanks to a built-in thermometer you can simply take temperature measurements, without the need to carry a separate thermometer• Resistance measurement, continuity test and diode test• Min/max and average recording to capture variations automatically• Peak value detection min-max• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives, in which the fundamental frequency harmonics overlap• In accordance with IP67, water and dust-proof and completely sealed for use in harsh environments• Designed to survive a 3 metre fall (with holster)• High-resolution display mode for 20,000 digits• True RMS voltage and current for accurate measurements on non-sinusoidal signals • Improved readability even in dark environments with backlit buttons• Improved readability thanks to large display digits and a two-stage bright backlight• Additional protection with inverted insertion into the holster when the device is not in use• Resistant to dangerous voltage spikes of up to 8000 V, which can occur when switching loads and with a switch circuit error in industrial plants. The device meets the conditions of the electrical safety standards of the IEC and ANSI (in each case, 2nd edition).• Long battery life (800 hours).• Relative value mode to remove the measuring line resistance with low-impedance measurements• Auto and manual range selection for maximum flexibility• Easy to read and set up thanks to the optional magnet holder - your hands remain free for other tasks• MSHA approval for mining applicationsTechnical data:DC voltage: 0.1 mV to 1000 V / ±0.05% + 1 digitAC voltage: 0.1 mV to 1000 V / ±0.7% + 4 digitsDC measurement: 0.1 µA up to 10 A / 0.2% + 4 digitsAC: 0.1 µA up to 10 A / 1.0% + 2 digitsResistance measurement: 0.1 ohm to 50 MohmDisplay range: 19,999 countsCapacitance measurement: 1 nF to 9999 µFFrequency measurement: 0.5 Hz to 199.99 kHzTemperature measurement: -200°C to +1090°CLow-pass filter (measurement at variable speed drives)Safety according to EN 61010: CAT IV 600 V, CAT III 1000 VIP specification: IP 67Power supply: three AA batteriesBattery life: 800 hoursBar chart/BacklightPeak value detection: 250 µsMin/max/average value: yesMeasurement hold...

Test equipment set for automotive, service and workshop applications, 4-mm system.Set content (each article in red and black):• 2 x test clip KLEPS 2700• 2x spring probe PRUEF 2610 FT• 2 x alligator clip AK 2 B 2540• 2x silicone test lead MLN SIL 150/1, heat-resistant, 150 cm

Test lead set as an accessory for measuring instrumentsSafety measuring instrument in acc. with IEC 61010• 2x test leads with dual-function test probes, PL 2600 S• Safety plug, angled

Control Board for iMOTION™ Modular Application Design Kit (MADK)Description:EVAL-M1-101T is a Control Board for iMOTION™ Modular Application Design Kit (MADK) platform. It is powered by IMC101T-T038 iMOTION™ Motor Control IC featuring advanced Motor Control Engine (MCE), that enables state-of-the-art Sensorless Field Oriented Control (FOC) without need for any coding. IMC101T-T038 is a part of the iMOTION™ IMC100 series, which is the next generation of well established iMOTION™ motor control IC platform dedicated to field oriented control of PMSM (BLDC) motors.This control board together with growing number of matching iMOTIONTM MADK power boards with M1 connector, create a wide portfolio of 3-phase inverter options, scalable in power ratings and operating voltages.Before setting up and running the motor control system, the user needs to download following files from the iMOTION™ Tools & Software webpage:• IMC101T-T038 MCE Software Package, containing the latest MCE firmware image, corresponding default configuration files and release notes• MCEWizard and MCEDesigner PC tools which are required for system configuring, controlling, tuning and monitoring.User should check this page regularly for updates on MCE firmware or iMOTION™ PC tools. Please refer to the EVAL-M1-101T User Manual for more information. Get your motor running in less than 1 hour! Eval-M1-101T, in combination with matching power boards from iMOTION™ MADK Platform, enables rapid prototyping of various inverterized motor control systems, for example fans, pumps and compressors.More about iMOTION™ on MADK platform!Features:• Field-proven Advanced Motion Control Engine (MCE)• Single-shunt or leg-shunt Sensorless FOC Control• Galvanically isolated on-board-debug interface• Integrated protection features• Integrated scripting engine similar to a small virtual machine• Complete kit for running any permanent magnet motor via sensorless sinusoidal control• 3.3V (default) or 5V VDD power supply• Micro-USB connector and on-board debugger isolated by digital isolator• Capable of 3-phase and type 3 of 2-phase modulation• RoHS complaint• PCB size is 65 x 45 mmBenefits:• Easy motor parametrization and tuning using MCEWizard and MCEDesigner tools• Fast time to market – No coding required for motor control functions• Wide range of iMOTION™ MADK power boards with matching M1 platform interface• High flexibility for motor control tuning and system functionalityTarget Applications:• Motor control and drives• Washing machines• Room air conditioners

Punch Down Tool with 110 and Krone Blade Inserts and cuts terminations in one simple operationPrecision blades are interchangeable and reversible between 110 and Krone standardsEasy to handle comfort grip Comfortable shape, easy to handleInterchangeable and reversible bladesSafe storage for spare bladeTwist and Lock style holder provides fast, easy blade changes and prevents blade pulloutTRENDnet's professional punch down tool, TC-PDT with 110 and Krone blades, inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and Krone. The punch down tool offers reliable, easy-to-use operation at an affordable price.

Lead-free Tacky Flux dispensing pen, 3.5 gViscous, contour-stable and halogen-free flux in a practical dispenserCircuitWorks® No-Clean Tacky Flux CW 8700 is a ROL0 flux developed specifically for higher temperatures in lead-free SMD/BGA repair and rework applications.It is characterised by high reliability and contour stability. CircuitWorks® No-Clean Tacky Flux gel holds the component in position. Its viscosity allows for easy application.The flux is noncorrosive and halogen-free.CircuitWorks® No-Clean Tacky Flux is also suitable for clean-room applications. Flux residue can be removed with flux remover (e.g. Chemtronics Flux-Off® No Clean Plus)

No-Clean flux-powder gel in spray form.For all soldering applications, but ideally suited, in particular, for fine pitch and SMD-applications. The flux-powder is drawn via a plastic tip and precisely applied to the area being soldered.The effect that flux-powder quickly volatises does occurs immediately with flux-powder gel. Flawless soldering results when used with hot air and soldering irons, in particular with MINI-FLOW soldering tips.• Flux-powder type: DIN EN 29454/1.1.3. - F-SW 32• Content: 5 ml

Blind Cover Module ReplacementBlind covers are used in distribution panels as well as in outlets to cover ports which are not in use.Material: PolymerColor: white, similar to RAL 9010

MCO IP69k protective housing for outdoor applications, set with mounting bracketDesigned for wall, DIN rail, quick and pole mountingincl. mounting bracket and mounting plate for quick and tool-free fixing of the flangeuniversal and flexible usecompletely dust- and waterproofresistant to ozone, UV radiation and salt waterresistant to high pressure jet cleaninghigh temperatures and strong vibrationstested according to IP69k, IP67 and IP66M32 tubes and flange made of anodized aluminumincl. M32 cable glands (PA) with sealing inserts, O-rings and adapter plates for MC module, keystone and fiber optic components, for clean mounting inside the flangesuitable for cable sheath diameters from 4.5 to 15.0 mmDIN rail adapter not included in deliveryNote:The rated voltage of the installed components must not exceed 50 VAC or 75 VDC.

MCO IP69k protective housing for outdoor applications, set wall/ housing bushingIncl. M40 locknut (PA) for wall and housing mountinguniversal and flexible usecompletely dust- and waterproofresistant to ozone, UV radiation and salt waterresistant to high pressure jet cleaning, high temperatures and strong vibrationstested according to IP69k, IP67 and IP66M32 tube and flange made of anodized aluminumincl. M32 cable gland (PA) with sealing inserts, O-rings and adapter plates for MC module, keystone and fiber optic components, for clean mounting inside the flangeCable sheath diameter: 4.5 mm to 15.0 mmNotice:The rated voltage of the installed components must not exceed 50 VAC or 75 VDC.

LSA Sensor No. 40 laying tool with cutting functionFor solderless, screwless and stripping-free connection and simultaneous cutting to length of cable cores on LSA strips.Product advantages:With fold-out pulling hook and release bladeFor conductor diameter 0.35 - 0.9 mm and core diameter 0.7 - 2.6 mmWith a sensor for detecting the wire end position