6515 products were found matching your search for measurement in 2 shops:

Safety test probe

This robust magnetic recumbent exercise bike will be a great choice for exercising at home. Equipped with a flywheel with 8 selectable resistance levels, an LCD computer display and a horizontally-adjustable seat, this hometrainer will give you an efficient workout. You can monitor your performance

Contact-protected, high-strength tapping clamp. Clamping range up to 30 mm bolt diameter. The flat part of the clamping jaws enables contact-safe clamping of thin wires.• Clamping range: 30 mm• Connection type: 4 mm socket• Rated voltage: 1000 V AC/DC• Rated current: 34 A• Resistance: 10 mO• Measurement category: CAT II (IEC 61010)• Colour: black

Test equipment set for safety applications in 2-mm safety systems, as an accessory for measuring devices.

Miniature alligator clip with high-strength insulation and clamps made of brass/bronze nickel-plated. The flat part of the clamping jaws (fine-wire gripping surface) allow a contact-safe clamping of thin wires. Clamping of flat parts (solder tags) and wires up to a max diameter of 4 mm possible.• Colour: grey• Measuring category in accordance with IEC 61010: CAT I• Standard: IEC 61010• Contact type: clamp• Connection type: 2 mm socket (spring-mounted)• Rated voltage: 30 VAC/60 VDC• Rated current: 8 A• Resistance: 5 mega-ohms

Contact-protected measuring lead, 4 mm diameter plug at either end, insulated by latching and sprung insulating sleeve, which is only released by pressure on the lateral locking spring. Highly flexible, double insulated stranded cable. Socket for further connections. Embedded colour indicator to detect damage to the insulation.• Length: 25 cm• Plug Ø: 4 mm, sprung• Socket Ø 4 mm• Cable cross-section: 1 mm² (259 x 0.07)• Rated voltage: 60 V DC• Rated current: 16 A• Colour: blue

Self-retaining 2 pole test clip, specially for SMD components. Gold-plated, hardened tip to check in circuits, flat gripper is used to check individual components, notch for clamping thin wires. Balanced spring force to measure small and large components. 0.64 mm pin connection. Spring electrically isolated.• Clamping range: 0 - 8 mm• Connection type: 2x 0.64 mm pin• Rated voltage: 60 V DC• Resistance: 6 mOhm• Colour: black

MAL S WG-B 100/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with angled 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 100 cmCable cross-section: 2.5 mm²Cable material: PVC

MAL S GG-B 100/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with straight 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 100 cmCable cross-section: 2.5 mm²Cable material: PVC

Contact-protected measuring lead, 4 mm diameter plug at either end, insulated by latching and sprung insulating sleeve, which is only released by pressure on the lateral locking spring. Highly flexible, double insulated stranded cable. Socket for further connections. Embedded colour indicator to detect damage to the insulation.• Length: 25 cm• Plug Ø: 4 mm, sprung• Socket Ø 4 mm• Cable cross-section: 1 mm² (259 x 0.07)• Rated voltage: 60 V DC• Rated current: 16 A• Colour: red

MAL S GG-B 50/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with straight 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 50 cmCable cross-section: 2.5 mm²Cable material: PVC

• Damage to temperature-sensitive materials is now a thing of the past!• The HL Scan allows you to monitor the temperature directly on the surface of your workpiece!• Optical and acoustic warning when above or below the selected temperature rangeTechnical dataDimensions (W x H x D): 51 x 44 x 146.6 mmVoltage: 9-V battery (included)Max. temperature detected: 300°COptimum working distance from the workpiece: 15 cmTemperature detection: 1 LED light beamOther settings: emission value (0.85/0.9/0.95)Tolerance range — from which point the HL Scan gives a warning(2.5%/5%/10%)Activation/deactivation of the optical andacoustic warningOptical warning on the display: red light = too hotGreen light = within target rangeBlue light = too coldSuitable for: HL 1920 E, HL 2020 E, HG 2120 E, HG 2320 E

Safety clip probe tip with rigid hook for secure clamping of eyelets, pins, wires and plates. Pluggable with safety measuring leads.• Clamping width: 5.5 mm• Connection type: 4 mm socket• Rated voltage: 1000 V AC/DC• Rated current: 20 A• Resistance: 50 mOhm• Measurement category: CAT III (IEC 61010)• Colour: red

For aligning/adjusting satellite aerials.Illuminated LCD screen with digital display of satellite signal field strengthMicroprocessor-controlledAttenuator for optimum adaptation of signal strengthBuzzer signal booster can be switched off or adjustedEasily mounted between the LNB and satellite receiverPower supplied via the satellite receiverIncludes short F connection cableTechnical dataGeneralPackaging type: retail boxUnit: 1 boxedColour: black/silverMaterial: plasticCertifications: WEEE, CEWidth: 128 mmHeight: 68 mmDepth: 28 mmWeight: 192 gLanguage scopeManual: en, de, fr, it, es, nl, da, sv, pl, csPackaging: de, en, fr, it

Safety clip probe tip with rigid hook for secure clamping of eyelets, pins, wires and plates. Pluggable with safety measuring leads.• Clamping width: 5.5 mm• Connection type: 4 mm socket• Rated voltage: 1000 V AC/DC• Rated current: 20 A• Resistance: 50 mOhm• Measurement category: CAT III (IEC 61010)• Colour: black

MAL S GG-B 100/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with straight 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 100 cmCable cross-section: 2.5 mm²Cable material: PVC

MAL S WG-B 100/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with angled 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 100 cmCable cross-section: 2.5 mm²Cable material: PVC

MAL S GG-B 100/2.5 - 4-mm safety system/test leadsContact-proof adapter test lead according to IEC 61010, with straight 4-mm safety plug and 4-mm safety socket. Highly flexible, double-insulated stranded cable, with impact-resistant grip sleeves. Embedded colour indicator to detect damage to the cable insulation.Technical dataRated voltage: AC/DC 1000 VMeasurement category according to IEC61010: CAT IIIRated current (note the derating curve): 32 AContact pin material: brass, nickel platedContact socket material: brass, nickel platedHousing material: PATemperature range according to IEC61010: -15°C to +70°CFlammability class according to UL 94 (applies only to housing base material): V-2Cable length: 100 cmCable cross-section: 2.5 mm²Cable material: PVC

Safety test probe

Safety clamp-type test probe with rotating grip jaws and flexible shaft. Wires and pins up to a maximum diameter of 3 mm can be clamped thanks to the special form of the grip jaws. Ø 2 mm sockets-connection of brass gold-plated.type: KLEPS 1600 blacksystem: 2 mm safety systemcolour: blackmeasurement cat. acc. IEC61010: CAT IIItype of termination: unsprung socket Ø 2 mmrated voltage AC/DC 1000Vrated current: 3 Acontact resistance: 50 mOhm