24 products were found matching your search for calliper in 3 shops:

Wiha fibreglass-reinforced calliper gauge made from a non-metallic high-tech material with 60% fibreglass content. For inside, outside, depth and level measurements. Extremely high stiffness and wear-resistant measuring base for constantly accurate measurements. Non-corrosive, non-magnetic, barely thermally conductive and electrically insulating.• Reading: 0.01 mm• Measurement: up to 150 mm• 5-digit display, 7.5 mm digit height, either in mm or inches• Switches on automatically during operation and off when not used for 5 mins• Zero position possible in each position for comparison measurement• Incl. battery and plastic case

dialMax® ESD calliper gaugeESD calliper gauge made from electrostatically dissipative material (dissipative, 1 m up to 1000 mOhm). Non-metallic, high-tech material with 60% fibreglass for extremely high rigidity. Non-corrosive, non-magnetic and electrically insulating.Dial gauge Ø 35mm, 1 pointer revolution corresponds to 10 mm. Measurement up to 150 mm, reading accuracy 0.1 mm.

• Wheel adjustment along scale with metric and inch divisions• Nickel-plated for corrosion protection.• Measurement range: 125 mm• Total length: 180 mm

Analogue/digital vernier calliper Highest quality, precision tool with measuring accuracy in line with DIN 862. Non-contact, capacitive linear measuring system suitable for outside, depth and step measurementsAccuracy in line with DIN 862• 0 to 150 mm• 5-digit LCD display• Resolution of 0.01 mm/0.005''• Display in mm or inches• Zero at any point• Stainless, hardened steelDelivered in plastic case including replacement battery (SG13).

For internal and external measurements, with polished tips, depth gauge and high-speed setting Graduated in mm and inches, vernier 1/20 and 1/128'' In leather wallet In leather wallet

Analogue/digital vernier calliper Highest quality, precision tool with measuring accuracy in line with DIN 862. Non-contact, capacitive linear measuring system suitable for outside, depth and step measurementsAccuracy in line with DIN 862• 0 to 300 mm• 5-digit LCD display• Resolution of 0.01 mm/0.005''• Display in mm or inches• Zero at any point• Stainless, hardened steelDelivered in plastic case including replacement battery (SG13).

Pocket calliper 0 - 150 mm, 235 mmDescriptionAccording to DIN 862With torque detectionFor external, internal, graduated and depth measurementsScale divided in blackMeasuring rails in mm and inch pitchWith thread tableCompletely hardened and finely machinedStainless steelIn faux leather pouchFeaturesDisplay: scale (mechanical)Packaging: faux leather pouchMaterial 1: stainless steelStandard: DIN 862Depth measurement: flatPackage content: 1Total length: 235 mmHead height (A): 40.0Measuring range: 0 - 150 mmMeasurement accuracy: +/- 0.05 mmWeight [g]: 145Packaging height: 13 mmPackaging width: 103 mmPackaging length: 258 mm

Dial calliper, +/-0.02 measuring accuracyDescriptionAccording to DIN 862With locking screw and rotating scale dialFor external, internal, graduated and depth measurementsScale divided in blackMeasuring rails in mm pitchWith thread tableCompletely hardened and finely machinedStainless steelIn sturdy plastic caseFeaturesPackaging: plastic caseDisplay: scale (mechanical)Material 1: stainless steelStandard: DIN 862Depth measurement: flatPointer rotation: 1Package content: 1Head height (A): 40.0Measuring range: 0 - 150 mmMeasurement accuracy: +/- 0.02 mmTotal length: 236 mmWeight [g]: 215Packaging height: 34 mmPackaging width: 95 mmPackaging length: 246 mm

Precision Caliper. Measures up to 150mm (6'') with a resolution of 0.1 mm (0.01''). Readings in mm or inches on a 5-digit LCD display. Supplied with battery. Material: high-strength plastic for inside, outside and depth measurementTechnical dataMeasuring length: 150 mm (6'')Accuracy: +/- 0.2 mmResolution: 0.1 mm (0.01'')Battery: 2 x 1.5V LR44 battery (2x incl.)

Precision calliper. Measures up to 150 mm (6'') with a closure of 0.01 mm (0.0005''). Reading in mm or inches on a 5-digit LCD display. Battery included. Material: stainless steel For inner, outer and depth measurementTechnical data Length: 150 mm (6'') Closure: 0.01 mm (0.0005'') Battery: 1 x 1.5 V LR44 battery (2x incl.)

Digital brake disc calliper 0 - 60 mm, 160 mmDescriptionAccording to DIN 862With locking screwFor internal measurementsScale divided in blackMeasuring rails in mm and inch pitchCan switch between mm/inchHold key for holding the readingReset (zeroing) possible at any positionLarge LCD display - digit height of 10.0 mmWith automatic shutdownCompletely hardened and finely machinedStainless steelIn sturdy plastic caseFeaturesDisplay: LCDNumber of batteries required: 1Packaging width: 123 mmLithium battery included: noBattery weight class: button cellBattery weight: 0.007Rechargeable battery: noBattery composition: alkaline manganese (alkaline)Battery included: yesBattery type: LR44Packaging length: 225 mmPackaging height: 40 mmWeight [g]: 130Packaging: plastic caseFunction attribute 1: with locking screwMeasuring range: 0 - 60 mmMeasurement accuracy: +/- 0.03 mmHead height (A): 55.0Total length: 160 mmPackage content: 1Application area: PKWStandard: DIN 862Material 1: stainless steelGeneral area of application: for brake discsBattery/rechargeable battery voltage: 1.5

This digital calliper is an extremely precise measuring instrument with a measuring range of 150 mm (6 inches). With a resolution of 0.01 mm (0.0005 inches), it offers the precision that professionals and DIY enthusiasts need for their measurements. The 5-digit LCD screen displays measurements in both millimetres and inches and can be used for a variety of applications.This calliper is suitable for both internal and external measurements as well as for depth measurements. The stainless steel construction ensures durability and precision. The calliper is supplied with 2 silver oxide batteries (type SR44) for immediate use.Precision: accurate measurements up to 0.01 mm for precision workVersatility: suitable for indoor and outdoor measurements as well as depth measurementsBattery included: includes 2 silver oxide batteries for immediate useDurability: robust stainless steel construction for long-lasting useClear display: clear 5-digit LCD display for easy reading

This universal air brake piston calliper wind-back tool kit works on standard workshop air supply and applies pressure to the caliper piston, while the handle is rotated by hand. Supplied with 22 adaptors which cover a wide range of popular vehicles, the tool can be used on wind back and push back

Special brake calliper brush - 2 rows - with 2-component handle - with hanging hole - narrow version - hard wire - for cleaning contaminated brake callipers and pads - length 235 mm - wavy brass wire Warranty: 2 years application: Brake caliper brush Material: Brass Quantity: 1 Rows: 2

Digital calliper, 200 mm, LC display, mm and inchThe digital calliper offers easy handling and high precision. The digital reading is displayed either in tenths of a millimetre or in inches. Measurement range: 0-200 mm It is possible to switch between mm and inch Accuracy: 0.01 mm Error limit: 0.02 mm to 100 m Capacitive measuring system Digit height: 6.5 mm Reset button Six-digit jumbo LC display Includes 2x AG13 button cell

Brake calliper file 8": This 8": brake calliper file has a special two-component handle and is suitable for cars with disc brakes. The file can be used to remove corrosion and brake deposits and can be used to clean the sliding surfaces of the brake pads. brand Sonic Equipment The company is known for the excellent quality products that the company provides. - with 2-component handle - for cars with disc brakes - for cleaning the sliding surfaces of the brake pads in the brake calliper - for removing corrosion and brake deposits from the brake calliper - blade coarsely milled on one side - with flat scraper at the end - length 155 mm - special steel application: Brake caliper file Dimensions: 270 x 33 x 33 mm Length (L1): 155 mm Length (L2): 115 mm weight: 170 grams Warranty: 2 years

Pin driver for dowel pins of brake callipers 180mm x 4mm This concerns a pin driver in favor of the dowel pins of brake callipers. This pin driver is distinguished by an extra long mandrel. which makes the pin driver extremely suitable for brake pins. The diameter of the pin driver is 4mm and the product comes from manufacturer Sonic. The company is highly regarded when it comes to tools. including for the braking system. - With extra long mandrel. especially for brake cotter pins - Diameter 4mm - 180mm long application: pin driver weight: 70 grams Size variant (mm): 4": Dimensions: 180x10x10 mm Warranty: 2 years

Pin driver for dowel pins of brake callipers 6mm This concerns a pin driver for the dowel pins of brake callipers. This pin driver has a size of 6": and is equipped with an extra long mandrel. The long mandrel ensures that the pin driver can be used especially for cotter pins of brakes. - With extra long mandrel. especially for brake cotter pins - Size variant: 6": - Dimensions: 175 x 10 x 10 mm Warranty: 2 years application: pin driver Size variant: 6": weight: 62 grams Dimensions: 175 x 10 x 10 mm

Application: - Operation of the brake calliper fitting on commercial vehicles. 12-point profile enables operation on hard-to-reach screw connections. For brake callipers on front and rear axles SCANIA series 3 - 4 - G - P - T - R - S - SCANIA Omnibus Citywide LE/LF - OmniCity - OmniLink and SCANIA chassis and IVECO Stralis. With 20 mm (3/4)'' square socket for the correct tightening of screws with HAZET torque wrench in accordance with the manufacturer's specifications. Wrench flat with laser-engraved formula for calculating the correct effective length. Made in Germany. Drive: Square, hollow 20 mm (3/4 inch). Output: Outside 12-point profile. Wrench size: 30 mm. Dimensions / length: 225.5 mm.

Reversible ratchet brake piston resetterThe BRILLIANT TOOLS reversible ratchet brake piston resetter BT706007 is equipped with steel plates for single, double or four-piston brake callipers. The ratchet design makes it easy to perform even the toughest jobs on brakes faster. The centrally positioned ratchet distributes the force evenly parallel to prevent the pistons from tilting. Ratchet technology allows full 360-degree rotation, so that the resetter can be placed in any position. Reversing in order to move the plates together is performed directly on the ratchet mechanism. The working range is 40 - 68 mm.DescriptionSuitable for almost all common vehicle types with floating and fixed callipers without integrated handbrake functionSturdy design with hardened return plates, for damage-free resetting of brake pistons, allows centred resetting without tiltingUsed for maintenance work on and replacing brake padsThe boots, pistons and cylinders are not damagedSpindle ratchet mechanism (reversible) reduces the effort requiredWorking range: 40 - 68 mmFeaturesWeight [g]: 900Packaging height: 50 mmPackaging width: 68 mmPackaging length: 281 mmWorking range: 40 - 68 mm