21922 products were found matching your search for connections in 4 shops:

Euro connection cord for Sonos® Euro male (Type C CEE 7/16) > Device socket C7 • for connecting active loudspeakers, such as the SONOS PLAY:3/PLAY:5Technical specifications?Connections Connection 2, type Device socket C7 Connection, type Euro male (Type C CEE 7/16) Performance operating voltage 250 V (AC) Cable Inner conductor cross-section 0.75 mm² max current capacity 2.5 Cable type Designation H03-VV-H2-F Inner Conductor number 2 pieces Cable length 2 m General

Warranty: 2 years Number of connectors: 2 Fitting Position: Rear axle right (driver&:#39:s side) Cable length (mm): 2160 Weight [kg]: 0.100

This powerful water pump is a perfect choice for bringing or draining water to meet your garden water supply as well as irrigation applications. We provide a strong steel frame to protect the pump from accidental damage. The frame also makes the whole pump easy to carry. With a 4800 W petrol engine,

Stereo cinch audio connection cable2 RCA male (audio left/right) > 2 RCA male (audio left/right) • transmits audio signals in top sound quality• for connecting audio components• gold-plated contact surfaces for optimum signal transmission• high-quality metal connectors• optimised bend protection and flexible cable sleevingTechnical specificationsConnections Connection, type 2 RCA male (audio left/right) Connection 2, type 2 RCA male (audio left/right) Cable Cable type round cable Inner conductor material CCS Cable length 1,5 m Number of shieldings 2 x Kink protection yes Ferrite core no General Consumption Unit 1 pc. in polybag Markings CE, WEEE

Stereo cinch audio connection cable2 RCA male (audio left/right) > 2 RCA male (audio left/right) • transmits audio signals in top sound quality• for connecting audio components• gold-plated contact surfaces for optimum signal transmission• high-quality metal connectors• optimised bend protection and flexible cable sleevingTechnical specificationsConnections Connection, type 2 RCA male (audio left/right) Connection 2, type 2 RCA male (audio left/right) Cable Cable type round cable Inner conductor material CCS Cable length 5 m Number of shieldings 2 x Kink protection yes Ferrite core no General Consumption Unit 1 pc. in polybag Markings CE, WEEE

Stereo cinch audio connection cable2 RCA male (audio left/right) > 2 RCA male (audio left/right) • transmits audio signals in top sound quality• for connecting audio components• gold-plated contact surfaces for optimum signal transmission• high-quality metal connectors• optimised bend protection and flexible cable sleevingTechnical specificationsConnections Connection, type 2 RCA male (audio left/right) Connection 2, type 2 RCA male (audio left/right) Cable Cable type round cable Inner conductor material CCS Cable length 3 m Number of shieldings 2 x Kink protection yes Ferrite core no General Consumption Unit 1 pc. in polybag Markings CE, WEEE

Straight connection cable for PRO X headphones (1.8 m)Straight connection cable1.8 m longThree-pin mini XLRStereo jack (3.5 mm)6.35-mm adapterSuitable for:DT 700 PRO XDT 900 PRO XDT 1770 PRODT 1990 PRO

Straight connection cable for PRO X headphones (1.2 m)Straight connection cable1.2 m longThree-pin mini XLRStereo jack (3.5 mm)6.35-mm adapterSuitable for:DT 700 PRO XDT 900 PRO XDT 1770 PRODT 1990 PRO

Warranty: 2 years Number of connectors: 2 Fitting Position: Front Axle Left Cable length (mm): 1910 Weight [kg]: 0.100

Straight connection cable for PRO X headphones (3 m)Straight connection cable3 m longThree-pin mini XLRStereo jack (3.5 mm)6.35-mm adapterSuitable for:DT 700 PRO XDT 900 PRO XDT 1770 PRODT 1990 PRO

The NA-SAC5 is a fully sheathed S-ATA to 4-pin adapter cable. It is compatible with both 3-pin and 4-pin fans and allows them to be powered directly from the S-ATA power connections on the power supply unit. In combination with the NA-SYC1 Y cables (sold separately), the NA-SAC5 is perfect for running multiple high-power fans without risking damage to a motherboard connector.

The headset adapter from Good Connections® allows you to use your conventional headset with two three-pin 3.5 mm jack plugs on your smartphone, tablet, notebook and many other devices with four-pin 3.5 mm jack socket. For easy connection, the connectors are color coded.Pin assignment according to OMTP standardThe four-pin jack connector of this adapter is assigned according to the Open Mobile Terminal Platform (OMTP) standard. According to this standard, the connector is assigned as follows from tip to shank:L = Left audio signalR = Right audio signalAUX = Additional signal, e.g. microphoneGND = Common ground (return line)Technical specification:Connector 1: 3.5 mm jack plug (4-pin, gold-plated)Jack plug with pin assignment according to OMTP standard (audio left / audio right / AUX / GND)Connector 2: 2x 3.5 mm jack socket (3-pin, gold-plated)Jack socket (pink) = microphone connectionJack socket (green) = audio connectionConductor material made of copper (CU) Color: BlackLength: approx. 20 cmNotes:Please check first if your devices support the OMTP or the CTIA standard. A four-pin 3.5 mm jack socket with CTIA pin assignment is required for the adapter to function properly. The OMTP variant is used in most older devices, the CTIA variant in most newer devices, for example Apple devices (iPhone, iPad, iPod and MacBook) as well as modern smartphones and notebooks.

With the LAN window connection from Good Connections, you simply run your LAN cable through the window frame. Open the window, put the LAN window in between, close the window, done! A tedious drilling through the wall is no longer necessary. The window opening is thin enough (about 0.3 mm) to close the window properly and at the same time strong enough to withstand many openings of the window.Technology: Printed circuit boardConnections: RJ45-socket on both sidesThickness: approx. 0.3 mmColor: TransparentTotal length: 25 cmLength of flexible area: 18 cmFor a better hold, the jacks can also be fixed with the two 3M adhesive strips supplied.

The extremely flexible SmartFLEX antenna cable by Good Connections® is suitable for the digital as well as analog reception of the cable network (DVB-T2, DVB-T, DVB-S, DVB-C). Easily connect your TV or smartTV to the cable connection or receiver, even in areas which are difficult to access. The angled IEC/Coaxial plug allows for a space-saving installation, e.g. for flat wall mounts or short wall distance.SmartFLEX technologyThe SmartFLEX technology is, contrary to the conventional rather stiff antenna cables, extremely flexible. The special composition of the PVC cable-coating enables very small bending radii and therefore facilitates the installation or the cable laying in your network. In addition to the higher flexibility the SmartFLEX cables are characterized by their mechanical strength and long durability, in particular for applications for which the cable is in motion (e.g. movable wall mounts).High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC). This enables an increased signal transmission and a higher breaking strength of the cable. Shielded full metal plugTo ensure a loss-free signal transmission, the plugs are 100% shielded and equipped with gold plated copper contacts. The massive, manufactured for a precise fit, plugs provide for a secure and optimal connection.Fourfold shielding 120 dB / 75 OhmThe fourfold shielding of the cable with a shielding value of 120 dB / 75 Ohm ensures a consistently high signal transmission. Technical specification:Fully shielded plugs: IEC/Coaxial angled plug to socketGold plated copper contactsConductor material (thickness: 1 mm) and contacts made of 99,99% oxygen-free copper (OFC)Fourfold shielded RG6 Coaxial-cableShielding: fourfold, 120 dB / 75 OhmShielding 1 and 3: aluminum foilShielding 2 and 4: aluminum braidDielectric made from foamed PECable-coating material: SmartFLEX PVCCable-coating diameter: 8 mm +/- 0,2 mmLength: 5 mColor: white

Audio cable, 3.5-mm jack, stereo, plug plugSolid metal housingGold-plated contactsDark blueOne angled plugLength: 0.5 m

Audio cable, 3.5-mm jack plug 2x RCA plugsSolid metal housingGold-plated contactsDark blueLength: 2.0 m

Connect your SATELLITE system with this Premium SAT cable with sheath current filter (ferrite core). Sheath current filters prevent the spread of high-frequency interference signals in cables and thus ensure perfect transmission of signals even over long distances.For example, eliminates hum loops when connecting cables or SATELLITE in conjunction with a hi-Fi system. When connecting the cable TV or SATELLITE TV, the shielding of the cable may have a different ground potential than the existing devices in the house. In such cases, you will hear a loud 50 hertz hum from the Hi-Fi system when you plug in the plug. To prevent this, it is recommended to use a sheath current filter or A SATELLITE cable with a built-in sheath current filter.The cable is suitable for connecting various devices such as SATELLITE receiver, TV, TFTs to THE SATELLITE system or the cable connection.Technical Specification:Connections: IEC (coax) plug to IEC (coax) couplingWith sheath current filter (ferrite core)Plug: MoldedShielding mass: BZT - CE >95dB/75OhmStructure of shielding: 1x0.65mm, 112x0.12 mm ALU + aluminum foilCores Material: Copper MixtureConnector Material: IronConnector color: BlackColor of cable: BlackLength: 7.5m

The fully shielded Cat. 6 patch panel from Good Connections® is made of robust 1.5 mm sheet steel and is suitable for Ethernet networks up to 1 Gigabit/s. Different network devices can be connected at the front using RJ45 patch cables. At the rear, solid or stranded cables are connected via LSA strips.Tool-free opening and closingThe housing cover is fixed with two screws. These can be loosened or tightened either with a screwdriver or by hand.Technical specification:Cat. 6 according to ANSI/TIA/EIA 568 C.2 StandardDesktop version with 12 ports Suitable for 1 Gigabit/s Ethernet and for transmission frequencies up to 250 MHzComplete shielding of RJ45 jacks and LSA stripsTerminal strips with colour coding according to TIA 568 A/BCable installation via LSA stripsFor solid and stranded cables with cable diameters from 22-26 AWGCable fixing with strain reliefHousing made of 1.5 mm sheet steelFixing possibility for cable tiescentral grounding connection0.5 Height units [HE]Operating temperature range: -20 °C to +60 °CColour: Deep black (RAL9005)Dimensions (WxDxH): 212 x 100 x 22 mm Package content: 1x patch panel incl. grounding cable1x illustrated manual6x cable ties

With the LAN window connection from Good Connections, you simply run your LAN cable through the window frame. Open the window, put the LAN window in between, close the window, done! A tedious drilling through the wall is no longer necessary. The window opening is thin enough (about 0.3 mm) to close the window properly and at the same time strong enough to withstand many openings of the window.Technology: Printed circuit boardConnections: RJ45-socket on both sidesThickness: approx. 0.3 mmColor: TransparentTotal length: 30 cmLength of flexible area: 25 cmFor a better hold, the jacks can also be fixed with the two 3M adhesive strips supplied.