692 products were found matching your search for crimp in 1 shops:

For crimping connectors of the Micro-Fit™ series from Molex LLC. parallel crimp die guidance to meet the particularly high requirements of small connectors consistently high crimp quality due to precision inserts and positive lock (unlockable) with mounted positioning aid for D-Sub miniature connectors for exact positioning of connector and cable crimping pressure is precisely set (calibrated) at the factory, adjustable Force amplification by knee lever for low-fatigue work Chrome Vanadium electrical steel in special quality, oil-hardenedAWG 30 - 26 / 24 - 22 / 20Application for Micro-Fit™ series from Molex LLC.Number of nests 3Length 190 mm

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors With threaded holes for cutting off copper or MS threaded pins with M 2.6/M 3/M 3.5/M 4 and M 5 Screw joint for a high level of stability and even run Special steel, high strength

Just one tool for almost 1000 crimping applications.almost parallel crimping die movementrepetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism)crimping pressure has been set precisely (calibrated) in the factory, re-adjustableoptimum transmission of force due to lever action for fatigue-reduced operationergonomically designed handlesdifferent locators for precise positioning of the connectorscrimping dies for applications not covered in the range offered here, may be available on requestchrome vanadium electric steel in special quality, oil-hardenedpliers without crimping dies, without case

Crimp pliers with up to 30% reduction in manual force compared to standard crimping pliers thanks to lever transmission. Consistently high crimping quality due to precision dies and integral lock (self-releasing mechanism)Crimping pressure is set precisely (calibrated) ex worksTwo-hand operation for easy crimping of large conductor cross-sectionsEasy to operate thanks to a balanced centre of gravity, angled head and ergonomically shaped handlesApplication: twin wire end ferrules 2 x 6/2 x 10/2 x 16 mm², number of nests: 3, AWG: 2 x 10/2 x 8/2 x 6

Parallel crimping performance to meet the particularly high requirements of smaller connectors Consistently high crimping quality thanks to the precision dies and integral lock (self-releasing) With mounted positioning aid for D-sub micro plugs for exact positioning of connector and cable Crimping pressure has been set precisely (calibrated) at the factory, adjustable Power boost via toggle lever for fatigue-free work Special-grade chrome vanadium electrical steel, oil-hardened Pliers burnished Handles with multi-component sleeves Application for Mini- Fit® by Molex LLC Number of nests 3 AWG 16/18/20 - 24 Length: 190 mm

With crimping pliers for wire end sleeves 97 53 09 and self-adjusting wire stripper 12 42 195.T-Loc lock for one-hand operation: open or close the systainer® with one twist and connect it to a second systainer®.Product advantages:In TANOS MINI-systainer® (sturdy plastic box)Two stackable plastic inserts with six recesses each for connectorsWith a range of ferrules with / without plastic collar

with crimping pliers 97 52 36 and self-adjusting insulation stripper 12 42 195 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without disconnecting two stackable plastic inserts with 6 trays each for connectors with an assortment of standard cable connectors

Just one tool for almost 1000 crimping applications.almost parallel crimping die movementrepetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism)crimping pressure has been set precisely (calibrated) in the factory, re-adjustableoptimum transmission of force due to lever action for fatigue-reduced operationergonomically designed handlesdifferent locators for precise positioning of the connectorscrimping dies for applications not covered in the range offered here, may be available on requestchrome vanadium electric steel in special quality, oil-hardenedwith attached crimping dies for insulated terminals and plug connectors

Just one tool for almost 1000 crimping applications.almost parallel crimping die movementrepetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism)crimping pressure has been set precisely (calibrated) in the factory, re-adjustableoptimum transmission of force due to lever action for fatigue-reduced operationergonomically designed handlesdifferent locators for precise positioning of the connectorscrimping dies for applications not covered in the range offered here, may be available on requestchrome vanadium electric steel in special quality, oil-hardenedwith attached crimping dies for non-insulated open plug-type connectors (4.8 and 6.3 mm connector width)

Crimp Assortmentin a TANOS MINI-systainer® (solid plastic box)T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer®opening when connected: fast and simple access to content without disconnectingtwo stackable plastic inserts with 6 trays each for connectorswith an assortment of standard cable connectorsModel:with crimping pliers 97 32 240

With crimping tool for wire end sleeves KNIPEX Twistor16® 97 53 18 and automatic stripping tool KNIPEX PreciStrip16 12 52 195.T-Loc lock for one-hand operation: open or close the systainer® with one twist and connect it to a second systainer®.Product advantages:In TANOS MINI-systainer® (sturdy plastic box)Two stackable plastic inserts with six recesses each for connectorsWith a range of ferrules with / without plastic collar

with crimping pliers 97 22 240 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without disconnecting two stackable plastic inserts with 6 trays each for connectors with an assortment of standard cable connectors

With crimping tool for wire end sleeves 97 53 09 and KNIPEX PreciStrip16® 12 52 195.T-Loc lock for one-hand operation: open or close the systainer® with one twist and connect it to a second systainer®.Product advantages:In TANOS MINI-systainer® (sturdy plastic box)Two stackable plastic inserts with six recesses each for connectorsWith a range of ferrules with / without plastic collar

Crimp pliers for cutting cables, stripping wires and crimping insulated and non-insulated cable lugs and plug connectors and open plug connectors. With threaded holes for cutting off copper or MS threaded pins with M 2.6/M 3/M 3.5/M 4 and M 5Screw joint for a high level of stability and even runApplication: Non-insulated cable lugs + cable connectorsCapacity in square millimetres: 0.5 - 6.0 mm² Number of nests: 3, AWG: 20-10

with crimping pliers for end sleeves 97 71 180 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without disconnecting two stackable plastic inserts with 6 trays each for connectors with an assortment of end sleeves (ferrules) with/without collar Model 97 90 05 : with crimping pliers for end sleeves 97 71 180 end sleeves (ferrules) without collar

with crimping pliers for end sleeves 97 53 04 and self-adjusting insulation stripper 12 40 200 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without disconnecting two stackable plastic inserts with 6 trays each for connectors with an assortment of end sleeves (ferrules) with/without collar

with Crimping Pliers ''PreciForce'' for End Sleeves (ferrules) 97 52 38 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content without disconnecting two stackable plastic inserts with 6 trays each for connectors with an assortment of end sleeves (ferrules) with/without collar

Miniature alligator clip with high-strength insulation and jaws plated with brass/bronze. The flat part of the clamping jaws (fine-wire gripping surface) allow a contact-safe clamping of thin wires. Clamping of flat parts (solder tags) and wires up to a max diameter of 4 mm possible. Crimp connector for wires 0.25 mm² to 0.5 mm², with subsequent assembly of the insulated lower part (supplement). Crimp with a suitable tool.• Colour: grey• Measuring category in accordance with IEC 61010: CAT I• Standard: IEC 61010• Contact type: clamp• Connection type: crimp 0.25 mm² to 0.5 mm²• Rated voltage: 30 VAC/60 VDC• Rated current: 8 A• Resistance: 5 mega-ohms

Miniature alligator clip with crimp connector. The flat part of the clamping jaws (fine-wire gripping surface) allow a contact-safe clamping of thin wires, but also of wires with max Ø 4 mm.• Clamping width: 4 mm• Connection type: 2 mm socket• Rated voltage: 60 V DC• Resistance: 5 mega-ohms• Colour: red

Miniature alligator clip with crimp connector. The flat part of the clamping jaws (fine-wire gripping surface) allow a contact-safe clamping of thin wires, but also of wires with max Ø 4 mm.• Clamping width: 4 mm• Connection type: 2 mm socket• Rated voltage: 60 V DC• Resistance: 5 mega-ohms• Colour: black