386 products were found matching your search for earthing in 1 shops:

Universal charging cable for connection to the mobile LAPP charging station Universal (LAPP 64693) with earthing contact plug for up to 2.3 kW, 1-phase with 10 A The mains adapter connects the LAPP charging station Universal for electric vehicles directly to an earthed socket - for uncomplicated charging at home or on the road. The cable's type 2 coupling is simply connected to the car, the angled protective contact plug to the socket. The charging process is started and ended automatically by the on-board electronics.The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).The mobile LAPP Mode 2 charging stations automatically recognise which plug-in charging adapter is being used and the electronics regulate the possible maximum charging power. The interchangeable LAPP plug-in charging adapters are resistance-coded and thus the possible maximum charging power is regulated by the electronics. All advantages at a glance: no setting of current or parameterisation necessary automatic termination of the charging process when the battery is fully charged Robust housing and cable that is safe to drive over Cover cap on the coupling protects against ingress of dust, dirt and water when stored disconnected Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage can only be used in combination with the mobile LAPP charger Universal (LAPP 64693) Technical details: Connection 1: Hybrid safety plug (type E/F, CEE 7/7) Connection 2: LAPP mains adapter disconnection point Charging power: up to 2.3 kW Charging mode: Mode 2 Max. current carrying capacity: 10 A Rated voltage: 230 V (AC) Number of phases: 1 Inner conductor, wire cross-section: 2.5 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 0.96 m General Model designation: 5555923000 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP adapter cable with earthing contact plug and LAPP adapter plug 1x operating instructions

ZEUS03EM 1200VA 720W UPS, IEC + Schu koIntegrated automatic voltage regulator protects against voltage fluctuationsPowerful microprocessorAC/Automatic restartDC voltage start ProvidesHID compatible USB connectionThe Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, offering a simple and safe way to protect your systems from dangerous surges and power outages. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.Technical specifications UPS topology: Line-interactive Output capacity: 1.2 kVA Output power: 720 W Input operating voltage (min): 220 V Input operating voltage (max): 240 V Output operating voltage (min): 220 V Output operating voltage (max): 240 V Battery voltage: 24 V Battery charging time (90 %): 8 h Form factor: Compact Product color: Black Cooling: Active Built-in fan: Yes LED indicators: Yes Audible signals: Yes Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm Auto restart: Yes Scope of delivery: Conceptronic ZEUS03EM Quick installation guide USB cable

ZEUS08EM 1500VA 900W UPS, IEC x 3, Schu ko x 2, HID USB, AVRIntegrated automatic voltage regulator protects against voltage fluctuationsPowerful microprocessorAC/Automatic restartDC voltage startProvides HID compatible USB connectionThe Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, offering a simple and safe way to protect your systems from dangerous surges and power outages. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.Technical specifications UPS topology: Standby (offline) Output capacity: 0.85 kVA Output power: 490 W Input operating voltage (min): 220 V Input operating voltage (max): 240 V Output operating voltage (min): 220 V Output operating voltage (max): 240 V Battery capacity: 6 Ah Battery/battery voltage: 12 V Battery charging time (90 %): 8 h Form factor: Compact Product color: Black LED indicators: Yes Audible signals: Yes Audible alarm modes: Alarm on battery, fault, low battery warning, overload alarm Auto restart: Yes Scope of delivery: Quick installation guide

ZEUS07ES 1000VA 600W UPS, Schu ko x 2, HID USB, RJ45 In/Out, AVRIntegrated automatic voltage regulator protects against voltage fluctuationsPowerful microprocessorAC/Automatic restartDC voltage startModem/LAN protection ProvidesHID compatible USB connectionThe Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPSideal is suitable for the limited workspace in small and home offices.Technical specifications UPS topology: Line-interactive Output capacity: 1 kVA Output power: 600 W Waveform: Sine Input operating voltage (min): 220 V Input operating voltage (max): 240 V Output operating voltage (min): 220 V Output operating voltage (max): 240 V Automatic voltage regulation: Yes Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm Auto restart: Yes Battery capacity: 7 Ah Battery voltage: 12 V Battery charging time (90 %): 8 h Form factor: Compact Product color: Black International protection rating (IP code): IP20 Scope of delivery: Output power cable USB cable Quick installation guide

ZEUS05E Office UPS, 650 VA, 360 WPowerful microprocessorAC/AutomaticrestartDC voltagestartModem/LANprotectionThe Conceptronic UPS offers long-lasting, reliable emergency power supply for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.Technical specificationsUPS topology: Standby (offline)Output capacity: 0.65 kVAOutput power: 360 WInput operating voltage (min): 220 VInput operating voltage (max): 240 VOutput operating voltage (min): 220 VOutput operating voltage (max): 240 VAudible signals: YesAudible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarmAuto restart: YesAC plug types: Type FNumber of AC outputs: 6Battery charging time (90 %): 8 hForm factor: CompactProduct color: BlackLED indicators: YesOperating temperature: 0 - 40 °COperating relative humidity: 10 - 90%Width: 110 mmDepth: 309 mmHeight: 84 mmWeight: 2.76 kgScope of deliveryQuick installation guide

ZEUS09E Office UPS, 850 VA, 490 W, battery and surge-protected Schu ko x 3, surge-protected Schu ko x 3, RJ45 input/outputPowerful microprocessorAC/automatic restartDC voltage startModem/LAN protectionThe Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.Technical specifications UPS topology: Standby (offline) Output capacity: 0.85 kVA Output power: 490 W Input operating voltage (min): 220 V Input operating voltage (max): 240 V Output operating voltage (min): 220 V Output operating voltage (max): 240 V Battery capacity: 6 Ah Battery/battery voltage: 12 V Battery charging time (90 %): 8 h Form factor: Compact Product color: Black LED indicators: Yes Audible signals: Yes Audible alarm modes: Alarm on battery, fault, low battery warning, overload alarm Auto restart: Yes Scope of delivery: Quick installation guide

333286 8-way German socket stripMains plug: IEC320-C148 x DIN49440 (Schu ko)Rated voltage: 250V 50/60Hz, 10A1 U Horizontal installationNominal load: 10AMaximum power: 2500WOn / Off switchCable length: 1.8mMaterial: Plastic shellThe Equip Power Distribution Unit is a robust product designed for the distribution of clear power. The product is carefully tested to ensure functionality and reliability. Connected with a 1.8m cable, built-in with an on/off switch, easy to install mechanical design, this is the ideal choice for 19'' rack system installation.Technical specifications Rack capacity: 1U Mounting: Horizontal Housing material: Plastic Product color: Black Number of AC outlets: 8 AC outlets Cable length: 1.8 m Certification: CE, RoHS Nominal input voltage: 250 V AC input frequency: 50 - 60 Hz Current (maximum): 10 A Max. Power: 2500 W Plug: C14 coupler AC plug types: Type F Width: 45 mm Depth: 45 mm Height: 482.6 mm Weight: 590 g

Copper earthing cable each 30 cm length for Canovate Network and Server Racks. A set contains 4 earthing cables including mounting material. Suitable for grounding connection, installation should be done only by authorized staff.Length: 300 mmConductor: CopperJacket: PVC, yellowOne side plug-in, other side with ringCross section: 2.5 mm

Earth bonding point (EBP)1 MOhm safety resistor per connection.2 m earth conductor with 4 mm lugTabletop and under-table mounting.3 x 10 mm push-button

Fixed earthing point to DIN EN 62561-1, a corrosion-free connection for conducting, for example, to the building reinforcements or to the earthing system, for protective potential bonding and/or functional potential bonding for installation in the formwork. Type M version with connection shaft (10 mm) and connection thread M10/12.Fixed earthing point type M stainless steel (V4A) M10/M12Fixed earthing point as a corrosion-free connectionfor conducting, for example, to the building reinforcementsor to the earthing system for theprotective potential bonding and/orfunctional equipotential bondingType M with connection shaft (l = 180 mm, Ø10 mm)Connection thread: M10/M12Plate material: stainless steel (V4A)Material No. 1.4571/1.4404/1.4401ASTM/AISI: 316TI/316L/316Shaft material: St/tZnShort-circuit current (AC 50 Hz /DC): 6.5 kAReference standard: DIN EN 62561-1

Earthing measurement lead, 4 mm connection, 20 m length, red, on roll

This power socket by Delock is designed to provide a T13 power connection. The simple snap-in mechanism ensures that the module is firmly in place and can be easily removed if necessary.Specification Connectors: 1 x power socket T13 with childproof lock 3 x screw terminal for PE, N, LRated current: 10.0 A / 250 V~Rated power: 2500.0 WMaterial: ABS / PC plasticSuitable for module holder Delock Easy 45Suitable for 45 mm cable duct with minimum depth 45 mmModule size: 45 x 45 mmDimensions (LxWxH): ca. 45 x 45 x 43 mmColour: whiteSystem requirements Mains supply with groundingA free module port Delock Easy 45 (45 x 45 mm)Package content Easy 45 Grounded Power Socket 45 x 45 mmUser manualPackage Box

Self-adhesive warning labels in accordance withDIN 4844 and UVV/VBG 125.-Earthing-Width: 25mmContents: 10 stickerOrder and delivery unit: 1 item = card of 10 stickers

Earthing system, 30 cm x 30 cm, made of woven copper wire, 2 pieces

Mobile Charging Station Universal Type 2 32 A / 3-phase / 22 kW with 2 adapter cables with earthing contact and CEE plug and a total length of 6 metres The LAPP Mode 2 charger with vehicle-side Type 2 coupling and mains-side interchangeable adapters ensures maximum flexibility for mobile charging. The set is ideal for uncomplicated charging at home or on the road with up to 22 kW at household sockets (CEE 7/3) or at CEE industrial sockets.On the mains side, the multi-function cable leads into a connection for the two enclosed adapter cables. This allows you to choose between an earthed plug type E/F and a 3-phase CEE plug (1-phase CEE plug available separately). The adapters allow you to conveniently charge your hybrid or e-car at household sockets or CEE three-phase sockets, e.g. in hotels, workshops and in the agricultural sector.However, the mobile charging station Universal Type 2 is not only suitable for practical use on the road or for emergencies. In combination with the LAPP wall bracket (LAPP 64710), it can replace the wallbox in your home. With a charging power of up to 22 kW, the LAPP charging station universal can keep up with most wall charging stations. The practical storage on the wall also protects the charging station from dirt and damage.The mobile electric car charging station has an integrated control and protection device in the control box (IC-CPD), which takes over the charging control via the charging cable to the vehicle. The charging process is automatically terminated as soon as the battery is fully charged. All advantages at a glance: convenient charging at home and on the road at household and industrial sockets no need to set current or parameters exchangeable mains adapters for more flexibility when charging automatic termination of the charging process when the battery is fully charged practical suspension eye on the housing for easy attachment to wall brackets ergonomic design of plug and coupling robust housing and cable that is safe to drive over Protection class IP55 (connected) / IP24 (not connected) drop-proof control box / waterproof to IP67 Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage Can also be used as a wallbox in combination with the LAPP wall bracket (LAPP 64710) (not included) Technical details: Connection 1: Type 2 coupling Connection adapter: type earth contact plug hybrid (type E/F, CEE 7/7) Connection adapter: type CEE plug red, 5-pin 3ph/32 A Charging capacity: up to 22 kW Charging mode: Mode 2 Max. current carrying capacity: 32 A Rated voltage: 440 V (AC) Number of phases: 3 Inner conductor, wire...

Mobile Charging Station Basic Type 2 8 A /1-phase / 1.8 kW with earthing contact plug and total length of 6 metres The LAPP Mode 2 charger with vehicle-side type 2 coupling and earthing contact plug provides flexibility for mobile charging. The type 2 coupling of the cable is simply connected to the car and the plug to the socket. The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).However, the Basic Type 2 mobile charging station is not only suitable for practical use on the road or for emergencies. In combination with the LAPP wall bracket (LAPP 64710), it can replace the wallbox in your home. The practical storage on the wall also protects the charging station from dirt and damage.The mobile electric car charging station has an integrated control and protection device in the control box (IC-CPD), which takes over the charging control via the charging cable to the vehicle. The charging process is automatically terminated as soon as the battery is fully charged. All advantages at a glance: convenient charging at home and on the road at household sockets no need to set current or parameters automatic termination of charging when battery is fully charged practical suspension eye on the housing for easy attachment to wall brackets? ergonomic design of plug and coupling robust housing and cable that is safe to drive over Protection class IP55 (connected) / IP24 (not connected) drop-proof control box / waterproof to IP67 Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage Can also be used as a wallbox in combination with the LAPP wall bracket (LAPP 64710) (not included) Technical details: Connection 1: Type 2 coupling Connection 2: type earth contact plug hybrid (type E/F, CEE 7/7) Charging power: up to 1.8 kW Charging mode: Mode 2 Max. current carrying capacity: 8 A Rated voltage: 230 V (AC) Number of phases: 1 Inner conductor, wire cross-section: 2.5 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 6 m General Model designation: 5555921002 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP mobile charging station basic with type 2 coupling (IC-CPD control box) and protective contact plug 1x operating instructions

BACHMANN IT PDU ALU 1HE 6x Schutzkontakt 3x C19, Zuleitung mit Stecker C20, schwarzVertikale IT PDU für eine platzsparende und modular erweiterbare Integration ins ServerrackFür eine zukunftsorientierte, hochgradig effiziente Energieverteilung im Datacenter, Server-Rack, Netzwerk-Rack.Das Maß des hochwertigen und sehr stabilen Aluprofils beträgt kompakte 44 x 47 mm.Die platzsparende Bauweise bietet dadurch Raum für Datenverkabelung und Luftführung zur Klimatisierung des Serverracks.Aluminium Steckdosenleiste, 1HE-Profil 44 x 47mm für 19''Schrank, schwarz eloxiert6x Schutzkontakt, rot3x C19 Kaltgerätedosen, schwarzZuleitung: 2m H05VV-F 3G1,5mm² mit C20 Steckerinkl. HaltewinkelAbmessungen: 440 x 44 x 47mm

BACHMANN IT PDU ALU 1HE 18x C13 3x Schutzkontakt CEE 3x 16A rotFür eine zukunftsorientierte, hochgradig effiziente Energieverteilung im Datacenter, Server-Rack, Netzwerk-Rack.Das Maß des hochwertigen und sehr stabilen Aluprofils beträgt kompakte 44 x 47 mm.Die platzsparende Bauweise bietet dadurch Raum für Datenverkabelung und Luftführung zur Klimatisierung des Serverracks.Aluminium Steckdosenleiste, 1HE-Profil 44 x 47mm für Vertikalmontage Einbauhöhe im Schrank 743mm18x C13 Kaltgerätedosen, verriegelbar3x SchutzkontaktZuleitung: 3,0m H05VV-F 5G1,5mm² mit CEE Stecker 3-phasig 16A rotinkl. HaltewinkelAbmessungen: 734 x 44 x 47mm

BACHMANN IT PDU ALU 1HE 12x Schutzkontakt, Zuleitung mit SchutzkontaktsteckerVertikale IT PDU für eine platzsparende und modular erweiterbare Integration ins ServerrackFür eine zukunftsorientierte, hochgradig effiziente Energieverteilung im Datacenter, Server-Rack, Netzwerk-Rack.Das Maß des hochwertigen und sehr stabilen Aluprofils beträgt kompakte 44 x 47 mm.Die platzsparende Bauweise bietet dadurch Raum für Datenverkabelung und Luftführung zur Klimatisierung des Serverracks.Aluminium Steckdosenleiste, 1HE-Profil 44 x 47mm für 19''Schrankschwarz eloxiertÜberspannungsschutz 6,5kA ( ÜSS )12x Schutzkontaktdosen (CEE 7/7), schwarzZuleitung: 2m H05VV-F 3G1,5mm² mit Schutzkontakt CEE 7/7inkl. HaltewinkelAbmessungen: 608 x 44x 47 mmÜberspannungsschutz (ÜSS)nach DIN VDE 0620-1:01-2002, EN 61643-11:08-2007, Typ 3Ableitstrom 6,5 kA, Ansprechzeit Geeignet für 16 Amit Varistoren, Temperatursicherung, Gasableiteroptische LED Funktions- und AusfallanzeigeVertikale IT PDU für eine platzsparende und modular erweiterbare Integration ins ServerrackFür eine zukunftsorientierte, hochgradig effiziente Energieverteilung im Datacenter, Server-Rack, Netzwerk-Rack.Das Maß des hochwertigen und sehr stabilen Aluprofils beträgt kompakte 44 x 47 mm.Die platzsparende Bauweise bietet dadurch Raum für Datenverkabelung und Luftführung zur Klimatisierung des Serverracks.Aluminium Steckdosenleiste, 1HE-Profil 44 x 47mm für 19''Schrankschwarz eloxiertÜberspannungsschutz 6,5kA ( ÜSS )12x Schutzkontaktdosen (CEE 7/7), schwarzZuleitung: 2m H05VV-F 3G1,5mm² mit Schutzkontakt CEE 7/7inkl. HaltewinkelAbmessungen: 608 x 44x 47 mmÜberspannungsschutz (ÜSS)nach DIN VDE 0620-1:01-2002, EN 61643-11:08-2007, Typ 3Ableitstrom 6,5 kA, Ansprechzeit Geeignet für 16 Amit Varistoren, Temperatursicherung, Gasableiteroptische LED Funktions- und Ausfallanzeige

Intended for installation in 19'' wall housingEarthing kit consists of:Earthing bar with 9 connection points9 x screw with washers for connection points 2 x M5 nuts6 x earthing cable H07V-K1 x 6 mm², gn/ge, with M5 ring cable lug on both sidesLengths: 2 x 390 mm2 x 580 mm1 x 670 mm1 x 800 mmMaterial: Steel, copper-platedAll parts packed in polybag