186 products were found matching your search for electrostatic in 2 shops:

Electronics side cutters, ESD protectedIn this pliers design, electrostatic energy is dissipated through the handles slowly and in a controlled manner. This protects devices susceptible to electrostatic discharge in accordance with applicable standards, e.g. IEC TR 61 340-5, DIN EN 61 340-5, SP method 2472• For delicate cutting tasks, e.g. in electronics and precision mechanics • Handles electrically dissipative • Robust, box and play-free joint • Low-friction double spring for gentle and smooth opening • The mirror finish in conjunction with a fine oil film offers good rust protection — no disruption in the circuit by flaking chrome parts • Blades additionally inductively hardened, cutting edge hardness approx. 62 HRC • Handles with two-colour multi-component handle casings, black/grey • Special tool steel in special quality, forged, oil-hardened Model:• Round head, with bevel and wire clamp — no uncontrolled escaping of wire sections Mirror-finish headHandles with multi-component casesShape 1 Cutting value of soft wire 0.3 - 1.6 mm dia. Cutting value of medium-hard wire 1.2 mm dia. Cutting value of hard wire 0.6 mm dia. Length: 115 mm Weight: 80 g

Warranty: 2 years Operating Mode: Electric Voltage [V]: 12 Number of contacts: 5 Suction pipe connector diameter [mm]: 38 Supplementary Article/Supplementary Info: without gasket / seal Supplementary Article/Info 2: Control Unit/Software must be trained/updated electrostatic vulnerable part Assy./disassy. by qualified personnel required!

Self-adhesive warning labels in accordance withDIN 4844 and UVV/VBG 125.- Components sensitive to electrostatic discharge-Width: 25mmContents: 10 stickerOrder and delivery unit: 1 item = card of 10 stickers

Hand-held electrostatic measuring deviceFor measuring electrostatic potential

Identical to KN 77 02 115 but with dissipative grip casings for electrostatic protection.Electronics side cutters for precision work on electronic components.Box joint, play-free precision joint, low-friction double spring, mirror-finish surface.Length 115 mm, round head shape, small bevelCutting force:Soft wire from 0.3 to 1.6 mm in diameterHard wire up to 0.5 mm in diameter

WELL THOUGHT OUT: variable torque can be adjusted for a wide range of applicationsPRACTICAL: all tools are safely and neatly stored in a robust and clear boxPROTECTION: electrostatic dissipating torque screwdrivers protect electronic components from destructionHEALTH: with patented SoftFinish® handle design for work that is gentle on the hands and muscles. Recommended by doctors and therapists of the AGR!EFFICIENT: the right torque protects you from material damage and reworkWhen working on electronic components, there is a risk of destroying them. With the TorqueVario®-S ESD torque screwdriver set, this problem is a thing of the past. The ESD torque screwdriver is manufactured in accordance with the international standard IEC 61340-5-1 and thus guarantees maximum protection of the electronic components. The dissipative tool handle has a surface resistance of 106 - 109 Ohm and dissipates electrostatic energy in a controlled and safe manner. In addition, the torque screwdriver enables controlled tightening of the screws. Using the integrated numerical scale and the included adjustment tool, the torque range can be variably adjusted to cover a wide range of applications.

Meets your requirements: Variable torque covers a wide range of applications.Reduces your costs: Electrostatic dissipative tools protect electronic components from destruction.Protects your health: With patented SoftFinish® handle design for hand and muscle-friendly work. Recommended by AGR doctors and therapists!Increases your efficiency: The right torque protects you from material damage and rework.Standards: IEC 61340-5-1.DIN EN ISO 6789.application: For controlled screwing on electrostatically sensitive components at a specified torque, in combination with a Wiha Torque 4 mm ESD interchangeable blade.Incl. factory test report

Tools dissipative, electrostatic dissipation.Design: ESD tools manufactured in according with IEC 61340-5-1 All pliers are made from high-quality tool steel, tempered and finely polished. Pliers handles dissipative over all conductive components. Surface resistance 10^6 - 10^9 Ohm.Pouch: Light and space-saving storage of tools.Contents: Side cutter without bevel, 115 mm (series Z 41 3 04) side cutter with bevel, 115 mm (series Z 44 1 04) front angled cutters almost without bevel, 110 mm (series Z 46 4 04) snipe nose pliers 120 mm (series Z 36 0 04)Application: Universal set for all cutting operations in the electronic field.

Meets your requirements: Variable torque covers a wide range of applications.Reduces your costs: Electrostatic dissipative tools protect electronic components from destruction.Protects your health: With patented SoftFinish® handle design for hand and muscle-friendly work. Recommended by AGR doctors and therapists!Increases your efficiency: The right torque protects you from material damage and rework.Standards: IEC 61340-5-1.DIN EN ISO 6789.application: For controlled screwing on electrostatically sensitive components at a specified torque, in combination with a Wiha Torque 4 mm ESD interchangeable blade.Incl. factory test report

MINI-KVM extension for USB input devices and VGA graphics (100 m)The CE100 is a KVM extender with USB ports that provides protection against electrostatic discharge and enables access to a computer system via a USB console (USB keyboard and mouse and monitor) up to 150 m away.The CE100 improves on its predecessors and is characterised by: 1) adjustable signal compensation on the remote unit to optimize image quality and 2) use of cost-effective Cat 5e cables instead of heavy and expensive cables to ensure better, simpler and more reliable data transfer.• Extends the VGA/keyboard/mouse connections of the local PC• Uses Cat 5e Ethernet cables to connect the local and remote device• Easily add or remove other computers in installation• Real-time DDC communication• Improved graphics quality — resolutions of up to 1920 x 1200• Enables access to a computer from a remote console up to 100 m away• Manual signal compensation to optimise image quality• No external power supply required for local unit• Built-in protection against static discharge up to 8 or 15 kV (contact voltage 8 kV, air voltage 15 kV)• Wall-mountable

PoE Adapters power Ubiquiti® products that support passive PoE.Device ProtectionPoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events.Convenient Wall-MountingThe 24V, 0.5A models, POE-24-12W and POE-24-12W-G, are wall-mountable using the optional wall-mount brackets.Seamless airGateway™ CompatibilityThe 15V, 0.8A and 24V, 0.5A models, POE-15-12W, POE-24-12W and POE-24-12W-G, work with the airGateway™ to bridge airMAX® connections to Wi-Fi at customer locations.

Foldable workstation pad, EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone).Dissipative work pad as a safe method to dissipate electrostatic charge, by connecting via the push buttons (2x 10 mm, safety resistance 1 MOhm) to a grounding point, grounding block, table grounding or floor covering.conductive 10^8 Ohmsurface resistance according to DIN IEC 61340-4-1with 2x 10 mm push buttonsto connect to a grounding plugideal for service work and mobile usecolor blackweight 130 g

Screwdriver and pliers set for repairing mobile devices such as smartphones, tablets, notebooks and other highly sensitive electronic components.The tools are packed in handy zippered cases made of black dissipative synthetic leather. EPA suitable for electrostatic protected areas (ESD workplace/ESD protection zone).with pliers from the EUROline seriesin dissipative zipper pocketmade of dissipative material9 rubber band loopsopening angle 180pliers high gloss burnisheddimensions 190 x 135 x 35 mmESD tool set CARAT consisting of:2251 ESD dissipative zipper pocket 9 empty pockets3-672-15 ESD tip cutter EUROline Mini-Wate 130 mm3-683-15 ESD needle nose pliers EUROline smooth gripping surfaces 130 mm4-603 ESD screwdriver slotted blade 1,5x0,25x60 mm4-605 ESD Screwdriver slotted blade 2,0x0,4x60 mm4-621 ESD Screwdriver cross recess PH0004-623 ESD Screwdriver cross recess PH05-191 ESD Plastic precision tweezers 120 mm shape 2a tip 2 mm wide6-661 ESD Screwdriver TORX T56-663-L ESD Screwdriver TORX T7 with hole

QUADRIOS GmbH ESD cleaning brush, length 17.7 cm, bristle head 4 cm, bristle length 1.6 cm, professional antistatic accessories Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 17.7 cm, length: 4 cm, bristle head width: 1.2 cm, bristle length: 1.6 cm.

ESD cleaning brush 14.1 cm, head 3.8 cm, bristle length 2.5 cm, EN 61340-5-1 Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 14.1 cm, length: 3.8 cm, bristle head width: 0.8 cm, bristle length: 2.5 cm.

QUADRIOS GmbH ESD cleaning brush, length 38 cm, bristle head 22 cm, bristle length 5 cm, professional antistatic accessories (compliant with EN 61340-5-1) Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 38 cm, length: 22 cm, bristle head width: 1 cm, bristle length: 5 cm.

QUADRIOS GmbH ESD cleaning brush, length 12 cm, bristle head 1.1 cm, bristle length 1.6 cm, professional antistatic accessories (compliant with EN 61340-5-1) Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 12 cm, bristle head diameter: 1.1 cm, bristle length: 1.6 cm.

QUADRIOS GmbH ESD cleaning brush, length 14.8 cm, bristle head 1.8 cm, bristle length 1.8 cm, professional antistatic accessories (compliant with EN 61340-5-1) Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 14.8 cm, length: 1.8 cm, bristle head width: 0.8 cm, bristle length: 1.8 cm.

QUADRIOS GmbH ESD cleaning brush, length 17.5 cm, bristle head 6.7 cm, bristle length 1.6 cm, professional antistatic accessories (compliant with EN 61340-5-1) Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 17.5 cm, length: 6.7 cm, bristle head width: 1.35 cm, bristle length: 1.6 cm.

QUADRIOS GmbH ESD cleaning brush, length 17 cm, bristle head 6.1 cm, bristle length 2.5 cm, professional antistatic accessories (compliant with EN 61340-5-1) Perfect for working on sensitive electronics and technology (electrostatic sensitive devices) For the safe cleaning of printed circuit boards, modules and electronic components Suitable for mobile or stationary applications and ESD workplaces Meets the requirements of the ''ESD standard'' DIN EN 61340-5-1Scope of delivery: 1 x ESD brush, length: 17 cm, length: 6.1 cm, bristle head width: 0.8 cm, bristle length: 2.5 cm.