167 products were found matching your search for extraction in 4 shops:

LogiLink® Cage nut insertion & extraction toolThe new cage nut tool WZ0038 is an invaluable helper for engineers and installers who want to insert or extract the cage nuts e.g. in 19” racks or matching components. It is very easy to use and reduces the risk of injury when installing or removing the devices with screwdriver or other inappropriate implement. Furthermore the new handy tool ensures that there will be no damage to the cabinet or devicesProvides easy insertion and removal of cage nutsWith adjusting screw for different size of the nutSuitable for cage nuts M6, 3/8'', 10 mmMaterial: AluminumDimension, weight: , 75 x 45 x 14 mm, 25 g

Dead Space: Extraction

SWZ 4-00 Assembly tool for cage nutsFor commercial M5 and M6 cage nutsmaterial: aluminium alloy

Soldering fume extraction for one workstationIntegrated design with saddle metal frameEquip straightening rollers and rubber footBrushless high-performance DC fan, low-noiseLarge LCD screen3 filter layers, for a cleaning rate of up to 99.97%Quick replacement of the 3 filtersFilter clogging alarmBuilt-in RS-485 communication interface, can be connected to computer, soldering/hot air station for synchronous operation controlThe appearance is simple and generous, the integrated design of the device adopts metal frame structure and is durable.Both sides are equipped with concave high-quality plastic handles, stable and reliable, easy to move.Brushless DC motor and integrated controller to ensure performance and quality.Air volume and flow rate can be adjusted as required.The wind wheel is made of special alloy to effectively prevent corrosion, and the unique dynamic balance correction technology makes the wind wheel run more stable and reliable, with large air volume, large suction power and high filtration rate.Triple filter design, layer-by-layer filtration to ensure more thorough filtration of harmful dust, the purification rate can reach 99.97%.Pre-filter, middle filter and main filter can be replaced separately, allowing longer service life and lower replacement cost.Flexible pipe can change direction and position according to needs (length can be customized), no need to lay additional pipes, easy installation, easy to use.

Solder fume extraction for two workstationsIntegrated design with saddle metal frameEquip straightening rollers and rubber footBrushless high-performance DC fan, low-noiseLarge LCD screen3 filter layers, for a cleaning rate of up to 99.97%Quick replacement of the 3 filtersFilter clogging alarmBuilt-in RS-485 communication interface, can be connected to computer, soldering/hot air station for synchronous operation controlThe appearance is simple and generous, the integrated design of the device adopts metal frame structure and is durable.Both sides are equipped with concave high-quality plastic handles, stable and reliable, easy to move.Brushless DC motor and integrated controller to ensure performance and quality.Air volume and flow rate can be adjusted as required.The wind wheel is made of special alloy to effectively prevent corrosion, and the unique dynamic balance correction technology makes the wind wheel run more stable and reliable, with large air volume, large suction power and high filtration rate.Triple filter design, layer-by-layer filtration to ensure more thorough filtration of harmful dust, the purification rate can reach 99.97%.Pre-filter, middle filter and main filter can be replaced separately, allowing longer service life and lower replacement cost.Flexible pipe can change direction and position according to needs (length can be customized), no need to lay additional pipes, easy installation, easy to use.

Suction arm with funnel-shaped nozzleEasy-Click 60 suction arm, flexible with funnel-shaped nozzle and throttle valveWidth: 230 mm, Height: 100 mm, Length: 1 m, Ø 60 mmScope of delivery:Easy Click 60 suction hose Ø 60 mm length: 1 meterEasy-Click 60 shut-off valve for table mounting for flex-arm and suction hose including shut-off valve and 2 table clampsALFA funnel nozzleEasy-Click 60 funnel nozzle for flexible and articulated suction arms, width 230 mm, height 100 mm. Adapter Z is required for attachment to an aluminum suction arm without flexible suction hose.

The soldering vapour extractor offered here is used for the extraction of soldering vapours at the soldering workplace to prevent the inhalation of the harmful soldering vapours and to filter the soldering vapours out of the air. The solder fume extractor works with easily replaceable activated carbon filters.Soldering work generates soldering fumes which are classified as hazardous to health. Since the introduction of lead-free solders with the associated higher soldering temperatures, it is particularly the more aggressive fluxes that cause these harmful and annoying fumes. Solder vapour extractors are therefore strongly recommended by the professional associations as well as by the Institute for Occupational Safety of the BfA.Desktop version for horizontal and vertical usewith LED-illuminationAirflow 1.03 m3 / min

A new generation of soldering exhaust systems - quiet & efficient like never before! Continuously adjustable suction power for each extraction arm Effective 3-stage filter system with a filter effect of 99.95% Extraction capacity of 110 m³/hr per extraction arm Visual and audible reminder for filter change High-quality filter materials that can be used with both EASY ARM series devices Interface for connection to i-CON soldering stations or a standby switch Master/slave operation Flexible system consisting of suction arms and nozzles enables individual design of workplaces Small footprintFiltering of hazardous solder fumes from ambient air3-stage filter system:Pre-filter: catches larger particles and dustCombination filter: separates microparticlesActivated carbon filter: binds toxic gasesDimensions (W x D x H): 255 x 490 x 470 mmWeight in kg 15Anti-static design (y/n) yesRated power (W): 80Standby power consumption in W 8Rated voltage (VAC): 100 - 240Noise level in dB (A) 50Volume flow in m³/h 2 x 110

2x4 4K HDMI splitter/downscaler incl. audio extraction Features:For resolutions up to 4K at 60 Hz, 4:4:4 with 18 Gbit/s incl. HDR formats such as Dolby VisionFeatures RCA (analogue) and Toslink (S/PDIF optical, digital) audio outputsIncludes a 4K to 1080p downscaler and signal equaliser for longer HDMI tracksInput-side support for HDCP 2.2, outputs with support for active or passive HDCP modeFirmware updated via microUSB, CEC pass-through, cascading (up to six) and EDID management including six pre-installed EDIDs

Flexible 1-m-long extraction arm, Ø 32 mm, with bevelled 45° aluminium nozzle

for EASY ARM 1 & EASY ARM 2For direct mounting on the device.

Desktop soldering fume extraction with E10 EPA / activated carbon filterThis soldering fume extraction unit is designed to be placed under the WX/WXSmanrt/WT1 and WE stations and therefore hardly takes up any additional space on the workstation.Harmful soldering fumes are extracted horizontally over the work surface. protects the health of employeesperfect for light/temporary usegreat suction power, low noise levellow maintenance and easy filter changePower 20 WCompact dimensions 269.5 x 212 x 110 mmmax.32 m3/hwith RS232 interfaceLow noise level 59 dBA at max. speed(delivered without soldering station)

Replacement filter for Atten solder fume extractor. Recommended replacement after 6 months.

for EASY ARM 1 & EASY ARM 2For table mounting up to 85-mm thickness.Includes connection hose 0CA10-2002.

The solder fume extractor offered here is used to extract solder fumes at the soldering workstation in order to avoid inhaling the solder fumes that are harmful to health and to filter the solder fumes out of the air. The solder fume extractor works with easily replaceable activated carbon filters.Soldering work produces soldering fumes which are classified as harmful to health. Since the introduction of lead-free solders with the associated higher soldering temperatures, it is particularly the more aggressive fluxes that cause these harmful and troublesome fumes. Solder vapour extractors are therefore urgently recommended by the employers' liability insurance associations, as well as by the Institute for Occupational Safety of the BfA.

Solder fume extraction of a new generation - silent and effective as never before! Continuously settable extraction power Effective 3-stage filter system - 99,95% filter degree 110 m³/h air flow per extraction arm Optical and acoustical reminder signal for filter exchange High performance filter materials, filters fit to both systems of the EASY ARM series Interface to connect to an i-CON soldering station or a standby-switch Flexible system of extraction arms and nozzles allows individual setup for each workplace Small footprintTechnical Data:Dimensions (W x D x H) in mm 255 x 255 x 470Weight in kg 7,5Antistatic DesignPower Rating in W 40Power consumption standby in W 6Nominal voltage in V AC 100 - 240Noise level in dB (A) 50Volume flow in m³/h 110

The soldering vapour extractor offered here is used for the extraction of soldering vapours at the soldering workplace to prevent the inhalation of the harmful soldering vapours and to filter the soldering vapours out of the air. The solder fume extractor works with easily replaceable activated carbon filters.ESD protected version for working environments in which sensitive electronic components are worked on.Soldering work generates soldering fumes which are classified as hazardous to health. Since the introduction of lead-free solders with the associated higher soldering temperatures, it is particularly the more aggressive fluxes that cause these harmful and annoying fumes. Solder vapour extractors are therefore strongly recommended by the professional associations as well as by the Institute for Occupational Safety of the BfA.Desktop version for horizontal and vertical usewith LED-illuminationAirflow 1.03 m3 / min

Width 15 cm, total length 5 m.  

Tool for extraction and insertionFits Minifuse and ATO fusesGood for hard-to-reach spaces