1472 products were found matching your search for industry in 1 shops:

Industrial labelling machine with quick-access keys and backlit display, including Rhino starter tapeThe DYMO Rhino™ 4200 carries out all labelling tasks quickly and accurately. The familiar QWERTY keyboard ensures it is easy to use. Use the one-touch ''hot keys'' to quickly create and format labels for wire/cable sheathing and flags, fixed-length labels and much, much more. Print labels up to 19 mm wide in an array of materials and colours — AND print directly on heat-shrink tubing.• QWERTZ keyboard• Quick-access keys for creating and formatting labels for wire/cable sheathing, barcode 39 and 128, fixed-length labels, labels for modules and multi-purpose labels• Prints on tape 6, 9, 12 and 19 mm in width• Favourites key• User-customised key• Pre-programmed library containing 150 symbols and terms for security, electrics, pro A/V and property management• Automatic save function/automatic shut-off function• Can be powered by six AA batteries• Lithium-ion battery (not included)Package contents:Rhino™ 4200, 12-mm white vinyl tape, quick-start guide

Industry painter with extremely durable and highly opaque colour pasteIdeally suited for labelling rough surfaces, dirty materials and rusty metals.• Fade-resistant, smudge-resistant and waterproof once dry• Also marks on clean surfaces underwater• Tip: 10.0 mm• Colour: yellowFor tough applications — the edding industry painterThe edding 950 industry painter is not even fazed by the most challenging of surfaces — it permanently marks and labels uneven, wet or dirty surfaces. It does not use ink to write, but rather an extremely durable and highly opaque colour paste. This paste writes on wood, stone and concrete, as well as many other materials, and can be used in a wide temperature range. The paste does not drip and even writes under water or in the rain. The edding 950 industry painter is available in three very fade-resistant colours. It has a rotary mechanism that retracts and extends the bullet tip.

Industry painter with extremely durable and highly opaque colour pasteIdeally suited for labelling rough surfaces, dirty materials and rusty metals.• Fade-resistant, smudge-resistant and waterproof once dry• Also marks on clean surfaces underwater• Tip: 10.0 mm• Colour: blackFor tough applications — the edding industry painterThe edding 950 industry painter is not even fazed by the most challenging of surfaces — it permanently marks and labels uneven, wet or dirty surfaces. It does not use ink to write, but rather an extremely durable and highly opaque colour paste. This paste writes on wood, stone and concrete, as well as many other materials, and can be used in a wide temperature range. The paste does not drip and even writes under water or in the rain. The edding 950 industry painter is available in three very fade-resistant colours. It has a rotary mechanism that retracts and extends the bullet tip.

Rhino™ 5200 by DYMO® Industrial: the portable, low-cost label printer for professionals in data communications, electrical engineering, audio/video, security, maintenance and servicing, the construction industry and broadcasting.Fast, robust and fully equipped with time-saving properties, the RHINO 5200 was developed for use by professional fitters in various work environments. • Designed to meet ANSI/TIA/EIA-606-A standards• ''Hot Keys'', which is available only from DYMO, automatically regulates the size, spacing and format of labels for wires and cables, distributors, control panels and connection fields, 110 blocks, vertical installations and installations with fixed length• Thanks to a pre-set symbol archive, industrial symbols, punctuation, currencies and break lines are all on hand• Large display for displaying multiple labels• Save/recall over 100 label formats• An integrated, non-slip rubber grip/buffer protects the device against any damage caused by accidental drops or adverse working conditions• The integrated carry strap leaves your hands free when moving around• Large two-line display with backlight for low-light installations• Prints 39 and 128 barcodes onto 19 mm labels• Easy-peel RHINO labels with industrial strength adhesive, available in five materials• Operated with six (6) AA batteries or, if you want to reduce your AA battery usage and costs, a quickly rechargeable lithium-ion battery• Automatic shut-off extends the service life of the batteries.Includes a robust, high-quality hard case, RHINO 5200 label printer, 19-mm flexible white nylon tape, 12-mm white vinyl tape, rechargeable lithium-ion batteries and a mains adapter.

Industry painter with extremely durable and highly opaque colour pasteIdeally suited for labelling rough surfaces, dirty materials and rusty metals.• Fade-resistant, smudge-resistant and waterproof once dry• Also marks on clean surfaces underwater• Tip: 10.0 mm• Colour: whiteFor tough applications — the edding industry painterThe edding 950 industry painter is not even fazed by the most challenging of surfaces — it permanently marks and labels uneven, wet or dirty surfaces. It does not use ink to write, but rather an extremely durable and highly opaque colour paste. This paste writes on wood, stone and concrete, as well as many other materials, and can be used in a wide temperature range. The paste does not drip and even writes under water or in the rain. The edding 950 industry painter is available in three very fade-resistant colours. It has a rotary mechanism that retracts and extends the bullet tip.

Industrial combination pliers 160 mmThe combination pliers from WOKIN made of robust, durable tool steel with an industrial finish have an ergonomically shaped two-component plastic handle for a secure hold. In addition to the gripping zones for flat and round materials, the combination pliers are equipped with two cutting edges, which can cut different thicknesses of wire.Features: Tool length of 160 mm drop forged tool steel made of chrome vanadium steel with black finish ergonomically shaped two-component plastic handle practical cutting surfaces for cutting wires

Gripping pliers, 10 '''''''', max. Opening 50 mm, industry, straightThe straight grip pliers from WOKIN with an industrial finish are suitable for holding and gripping various materials. It is made of high-quality chrome-vanadium steel and is easy to use.Features:nickel-platedmax.opening: 50 mmSize: 10 ''

Brobusta® CEE 1 IP 44 industry/construction site cable reelFor use on construction sites and outdoors, IP 44.• CEE version, splash-proof.• CEE plug 400 V/16 A,• 1 CEE socket 400 V/16 A• Two splash-proof earthing contact sockets 230 V.• With 3-pin safety shut-down and overheating protection.• 30-meter H07RN-F 5G2.5 cable• Extremely robust, powder-coated carrying frame. • Reel body made from highly breakage resistant Brefelx special rubber.• Earthing contact sockets distributed on separate phases.• RN cable is approved for more stringent building conditions according to VDE 0100 part 704.

E-DAT Industry RJ45 field plug insert Cat.6 class EAField attachable Cat.6 class EA plug for installation in plug housing IP67 of variants 1, 4, 5, and 14Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT8-wire field-wireable RJ45 connector for AWG 22connection of AWG 26/7 - 22/7, AWG 26/1 - 22/1 possiblesolid wire Cu conductor diameter 0.4 - 0.64 mmStranded copper conductor diameter 0.48 - 0.76 mmCore diameter up to 1.6 mmcable sheath from 5,5 to 8,5 mmconsists of only 2 partseasy to assemble - can be connected without special toolsindustrial zinc die-cast housingcan be used as test plug on the IP67 side of variants 1, 4, 5, 6 and 14

GP NiMH industrial cell.With their high capacity, these cells are ideal for a wide range of applications, such as telephones, models, camcorders, notebooks, mobile radios etc.

E-DAT Industry RJ45 Coupler Insert Cat.6 Class ECat.6 class E RJ45 coupler for installation in flange housing IP67 of variants 1, 4, 5, and 14 can be used in combination with the universal test socket with protection class IP65Class E compliance according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE) and HDBaseTvery compact designsymmetrical design, can be installed in any positionFS 2.8 ground connection for potential equalization on both endsincreased vibration and shock resistance due to 4 springs on the shield platesrobust zinc die-cast housing

E-DAT Industry RJ45 field jack insert Cat.6 class EA, T568BRJ45 field jack Cat.6 class EA for installation in flange housing IP67 of variants 1, 4, 5, and 14 in connection with the universal test socket suitable with protection class IP65compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE) and HDBaseTno special tools necessaryAWG 26/7 - 22/7, AWG 26/1 - 22/1 possibleno protruding contours2 x FS 2.8 mm ground connection for potential equalization on the cable sideincreased vibration and shock resistance due to 4 springs on the shield platesconsists of only 2 parts, easy to assemblerobust zinc die-cast housingcan be reconnected without problems

E-DAT Industry RJ45 plug Cat.6 class EAMulti-port Cat.6 class EA connector Class EA compliance according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09suitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseTconnection AWG 27/7 - 24/7 and AWG 26/1 - 24/1 possiblesolid wire Cu conductor diameter 0.36 - 0.51 mmstranded copper conductor diameter 0.46 - 0.61 mmcore diameter from 0,85 - 1,05 mmcable sheath up to 7,3 mm connectableCrimp contacts and shield can be connected with crimping tool in one operationVariant with and without bend protection sleevecolored bend protection sleeves optionally availabletrumpet as bending protection of the connection cablecan be used as test plug on IP67 protected sockets of variant 1, 4, 5, 6, and 14

E-DAT Industy RJ45 plug black Cat.6 class EAMulti-port Cat.6 class EA connector Class EA compliance according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09suitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseTconnection AWG 27/7 - 24/7 and AWG 26/1 - 24/1 possiblesolid wire Cu conductor diameter 0.36 - 0.51 mmstranded copper conductor diameter 0.46 - 0.61 mmcore diameter from 0,85 - 1,05 mmcable sheath up to 7,3 mm connectableCrimp contacts and shield can be connected with crimping tool in one operationVariant with and without bend protection sleevecolored bend protection sleeves optionally availabletrumpet as bending protection of the connection cablecan be used as test plug on IP67 protected sockets of variant 1, 4, 5, 6, and 14

Multi-port Cat.6 class EA plug to be assembled in the field, consists of only 2 parts. Connection without special tools. Also the strain relief is easy to actuate.

The high-quality P21WL01 panel PC series features a rugged aluminium housing with IP65-compliant front panel, is powered by an Intel ULV processor and features a Full HD display with projected capacitive 10-point multi-touch function. Passive cooling means that the system is virtually silent, maintenance-free and approved for non-stop 24/7 operation. The panel PC is available with different Intel Core processors and additional features on request. This makes it ideal for rugged and public applications such as healthcare, hospitality, digital signage, POI, POS, kiosk and industry.

E-DAT Industry IP67 V6 AP, 1 port Cat.6A - C6AmodulRJ45 connector unit C6Amodul in flange housing according to ISO/IEC 24702 and IEC 61076-3-106 Var. 6 standardGHMT Cat.6A re-embedded PVP certifiedtested: component up to 600 MHz, link up to 800 MHzsuitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseTeasy-to-install connection of data cables AWG 24/1 - 22/1 (solid) and AWG 26/7 to 22/7 (stranded) to IDC cutting terminalsintelligent cable management in charging unit, also suitable for heavily twisted cablesmarking of the wire assignment T568A and T568B directly on the charging unitmeets protection class IP67 when matedmating face according to IEC 61076-3-106 (variant 6)large-area 360° shield contactconnection of commercially available RJ45 plugs possible (no IP protection)mounting without special tools, strain relief via snap-in clip directly at the charging piece of the moduleColor: light gray RAL 7035 Cat.6A component test according to ISO/IEC 11801 Ed. 2.2: 2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certifiedCompliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09

E-DAT Industry IP67 V6 AP, 1 port Cat.6A - E-DAT modulRJ45 connection unit E-DAT modul in flange housing according to ISO/IEC 24702 and IEC 61076-3-106 Var. 6 standardsuitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseTeasy-to-install connection of the 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded wire with 7-wire CU strand AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminalsmarking of the wire assignment T568A or T568Bmeets protection class IP67 when matedmating face according to IEC 61076-3-106large area 360° shield contactingSurface mounting possible (AP)connection of commercially available RJ45 plugs possiblesimple, time-saving installationcolor: light gray RAL 7035 Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certifiedClass EA compliance according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09

E-DAT Industry IP67 8(8) EbK including mounting kit• For installation of individual modules with keystone installation type• IP67 plug face in accordance with IEC 61076-3-106 (version 6)• Connection of commercial RJ45 connectors possible (no IP protection)• Simple assembly• Colour: light grey, RAL 7035• Mounting kit consisting of robust counterplate with four screws• Not suitable for E-DAT Industry module and couplings

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel.For industrial and outdoorThe network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, moisture and corrosion. It also has an increased bending strength, ideal for use in industrial areas.Specification Connectors: 1 x RJ45 plug 1 x RJ45 plug1:1 connectedCat.7 specificationShielded (S/FTP)Environmental temperature: -20 °C ~ 75 °CCable gauge: 26 AWGCable diameter: ca. 6.0 mmCable jacket material: TPEColour: blackLength: ca. 2 mSystem requirements A free RJ45 jackPackage content Patch cablePackage Zip poly bag