143 products were found matching your search for lateral in 3 shops:

Motor protection switch with thermal and magnetic tripping.These devices are easy to operate and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors.

Made in GermanyM16 connection, with side slots for use without extraction, for dry cutting, nominal speed Ø68 mm = 800 - 2000 rpm, Ø82 mm = 800 - 1700 rpm, only suitable for use without impact mechanismUniversal spot facer for abrasive and hard materials from abrasive sandstone to highly compressed sand-limestoneFor bulk densities from 0.8 to 2.2Colour: silver universalLength: 70 mm - 10 segmentsVersion: without extractionDrill bit: M16 diamond socket drill bitBore length: 70 mm - 10 segmentsBore Ø: 82 mm

Motor protection switch with thermal and magnetic tripping.These devices are easy to operate and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors.

Made in GermanyM16 connection, with side slots for use without extraction, for dry cutting, nominal speed Ø68 mm = 800 - 2000 rpm, Ø82 mm = 800 - 1700 rpm, only suitable for use without impact mechanismUniversal spot facer for abrasive and hard materials from abrasive sandstone to highly compressed sand-limestoneFor bulk densities from 0.8 to 2.2Colour: silver universalLength: 70 mm - 8 segmentsVersion: without extractionDrill bit: M16 diamond socket drill bitBore length: 70 mm - 8 segmentsBore Ø: 68 mm

Motor protection switch with thermal and magnetic tripping.These devices are easy to operate and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors. TeSys GV2 motor protection switches are compact and easy to select with an overall width of just 45 mm. Motor controller and protection, in accordance with standards IEC 947-2 and IEC 947-4-1. IE4-ready.

For two pliers up to 150 mm length Made of durable polyester fabric With hook-and-loop With lateral, elastic holder for torches, ballpoint pens or similar With practical belt loop

X-Cut compact side cutters, high ratio• Box joint: maximum stability with low weight • Double-bearing pivot axle for hard, permanent stresses • High cutting performance with little effort due to optimal coordination of cutting angle and transmission ratio with lateral offset pivot point • 40% force saving compared with side cutters of the same length • Large opening width for thicker cables • Precise cutting also of fine copper wires • Compact, weight-saving design • Universal application, in assembly, maintenance and production • Chrome vanadium high-performance steel, forged, oil-hardened Pliers black atramentisedPolished headHandles with multi-component casesCutting value of medium-hard wire 3.8 mm dia.Cutting value of hard wire 2.7 mm dia. Cutting value of piano wire 2.2 mm dia. Cutting value of soft wire 4.8 mm dia. Length: 160 mm Weight: 192 g

Knee brace, with double lateral articulated stabilizers, indicated for the rigid stability of the knee after a moderate to severe injury.

Specially designed for SLR and medium format cameras, the Manfrotto 410 Junior Geared Head is a compact geared head that uses easily adjustable knobs and offers precise geared movement in three directions: 360° of pan, +90 to -30° of front tilt & +90 to -30° of lateral tilt. This professional head has a large camera platform and a leveling bubble, and the camera screw travels in a 2" slot to facilitate perfect balancing of the camera's centre of gravity.

For screens 50'' - 100'' (127 - 254 cm), load up to 70 kg, also suitable for curved TVs, perfect for corner mountingLateral rotation: 180°Tilt: +2°/-15°Screen can be horizontally adjusted: +/- 3°Wall clearance: 70 - 800 mmVESA 300x200 - 800x600With cable management systemIncludes mounting materials and installation instructionsIn cardboard packaging

Max. load 20 kgDetails:Tilt: +/-25°Lateral rotation: 360°Can be tilted up to 90°, so can also be mounted on sloping ceilingsHole spacing universally adjustable (maximum hole diameter 37 cm)Adjustable ceiling clearance: 490 - 690 mmIntegrated cable guideWhiteIncludes installation instructions and mounting materialIn cardboard packaging

For 37'' - 70'' (94 - 178 cm) screensMax. load 50 kg, whiteDetails:Tilt: +10°/-20°Lateral rotation: 180°Horizontal adjustment: +/-3°VESA max. 600 x 400Wall clearance: 60 - 473 mmWith cable management systemIncludes mounting materials and installation instructionsIn cardboard packaging

Powered by a powerful DC special motor, quiet and long lasting.Sanding belt flush to the left: This allows surfaces to be machined to the corners. A fine adjustment of the castors prevents lateral unrolling. Easy to change the belt without tools due to spring tension. Housing made of glass-fibre-reinforced POLYAMIDE. Complete with five each of K 150 and K 240 sanding belts.Technical data:230 V. 150 W. Sanding belt: 40 x 260 mm. Sanding area: 60 x 40 mm. Belt speed: 160 m/min. Length: 175 mm. Weight 700 g. Insulated to Class 2.

For 37'' - 70'' (94 - 178 cm) screensMax. load 2x 45 kgFor 2 LCD TVsUp to 910-mm ceiling clearanceDetails:Also suitable for sloping ceilings up to 60°Lateral rotation: 360°Tilt: 5°/-20°Horizontal adjustment: +/-3°Ceiling clearance: 560 - 910 mmVESA: 200x200 - 600x400Integrated cable guideIncludes installation instructions and mounting materialIn cardboard packaging

For 26'' - 47'' (66 - 119 cm) screensMax. load 50 kgDetails:For VESA standard hole spacing (75/100/200/300/400)Tilt: +3° / -10°Horizontal adjustment: +/-3°Wall clearance: 52 - 500 mmLateral rotation: 180°With cable guideIncludes installation instructions and mounting materialIn cardboard packaging

For 32'' - 55'' (81 - 140 cm) screensMax. load 50 kg, whiteDetails:Tilt: +10°/-20°Lateral rotation: 180°Horizontal adjustment: +/-3°VESA max.: 400 x 400Wall clearance: 60 - 473 mmWith cable management systemIncludes mounting materials and installation instructionsIn cardboard packaging

For 37'' - 70'' (94 - 178 cm) screensMax. load 50 kgDetails:VESA max. 600 x 400Wall clearance: 64 - 510 mmTilt: +10/-20°Lateral rotation: 120°+/- 3° horizontally adjustableIncludes mounting materials and installation instructionsIn cardboard packaging

For 17'' - 37'' (43 - 94 cm) screensMax. load 40 kgDetails:VESA 100 - 200Tilt: +/- 15°Horizontal adjustment: +/- 5°Lateral rotation: 180°Wall clearance: 62 - 595 mmIncludes installation instructions and mounting materialIn cardboard packaging

MicroClick MC 200-Multi torque wrenchEnables torque-controlled fitting of screws and sleeves to pipe joints, hydraulic lines, pneumatic pipelines and threaded rods. The perfect solution in fiddly situations and when a tool cannot be used from above. For lateral access and in tight situations.10 square drive shell tools (14 x 18 mm) for locking in place with a spring pin: 9 open-end wrenches forged from CRV steel, in sizes 13 - 14 - 15 - 17 - 19 - 22 - 24 - 27 and 30 mm. A head with ratchet mechanism and 1/2'' square end (12.5 mm) makes the MicroClick MC 200-Multi your go-to torque wrench for socket wrench applications.The MicroClick MC 200-Multi torque wrench is a precision tool andcomes complete with a practical plastic case for storage.

For 13'' - 30'' (33 - 76 cm) screensMax. load 20 kgDetails:Lateral rotation: 180°Tilt: +/- 20°For VESA 75/100Wall clearance: 60 - 255 mmWith cable management system and spirit levelIncludes mounting materials and installation instructionsIn cardboard packaging