1482 products were found matching your search for meter in 2 shops:

For aligning/adjusting satellite aerials.Illuminated LCD screen with digital display of satellite signal field strengthMicroprocessor-controlledAttenuator for optimum adaptation of signal strengthBuzzer signal booster can be switched off or adjustedEasily mounted between the LNB and satellite receiverPower supplied via the satellite receiverIncludes short F connection cableTechnical dataGeneralPackaging type: retail boxUnit: 1 boxedColour: black/silverMaterial: plasticCertifications: WEEE, CEWidth: 128 mmHeight: 68 mmDepth: 28 mmWeight: 192 gLanguage scopeManual: en, de, fr, it, es, nl, da, sv, pl, csPackaging: de, en, fr, it

Warranty: 2 years Resistor Type: Hot wire air mass sensor Number of connectors: 4 Weight [kg]: 0.17

Optimising your energy consumption relies on comprehensive energy measurement. WAGO now features a variety of new energy meters in its range that provide numerous advantages. The meters use push-in terminal connectors with levers and can be connected very easily and quickly. The devices have a width of just 72 mm for direct measurement. This saves a lot of space in the control cabinet. In addition to the values for active and reactive energy, the energy meters also record mains frequency as well as current, voltage and power for all phases. On the large illuminated display, users can see all energy quality features at a glance.Save time on every level thanks to the push-in CAGE CLAMP® and leversReal space-saver: 72-mm wide (4PU)Measure supply and purchaseEnergy recording in four tariffsCommunication module: M-Bus and Modbus® interface and 2 S0-pulse outputsFull transparency at a glance: Displays energy quality features on an illuminated full-frame displayIntuitive configuration: Sensitive controls and configuration app via Bluetooth®

The models of the P 205 series are practical and robust analogue measuring instruments especially for student experiments.These low-cost units are designed for use as desk units / table-top units and have moving coil movements, mirror scales and safety sockets in 4 mm technology. Furthermore, these analogue devices do not require a power supply, which makes them durable and cost-saving. On the large analogue mirror scale the respective measured values can be read off comfortably by the pupil or student. There is a wide range of models with various functions and measuring ranges available.Product benefits:High quality device for use in schools and the teaching aid sectorSturdy ABS plastic housingNo power supply required for operationWith mirror scale and 4 mm safety socketsClass: 2.0Dimensions: 90 x 106 x 103 mm

CO2 meter C2M L 4050 / CO2 traffic light for monitoring air quality (with display and acoustic signal, with integrated battery, up to 12h operation)The CO2 meter is used to assess the risk of infection by aerosols. The CO2 concentration (carbon dioxide) is considered an indicator of the aerosol content of the room air and is thus an indication of potential exposure to viruses (e.g. Covid19 etc.). The CO2 traffic light measures and monitors the CO2 concentration (carbon dioxide) and thus the air quality. Since CO2 is colorless and odorless, too high a load in the air is not immediately noticeable. This quickly leads to loss of concentration, dizziness and headaches. The CO2 sensor can be easily positioned on the table or alternatively hung on the wall. The CO2 detector is perfect for all indoor areas, such as in the home, school, office, kindergarten or public facilities. The traffic light display allows you to quickly read how the current air quality is. In addition, the room air meter emits an acoustic alarm signal as soon as the limit value (1400 ppm) is exceeded. Normal operation is via a supplied power supply unit, otherwise the carbon dioxide detector can be operated without a power supply unit for up to 12 h by the integrated battery. The CO2 alarm continues to convince with the following features:With traffic light display and alarm signal for quick assessment of the indoor air quality and the need for ventilation.Measurement of CO2 concentration, air temperature and humidityWith high-quality NDIR sensor (measuring accuracy +/- 50 ppm)12 h operation without power supply due to integrated batteryPackage contents:1x CO2 detector C2M L 40501x DC 12 V power supply unit2x screws2x dowels1x instruction manual

The testo 510 differential pressure measuring device means that heating engineers and air conditioning technicians are well equipped: It measures the differential pressure from 0 to 100 hPa and supports you, for example, when checking filters on air conditioning systems or measuring the gas idle and gas flow pressure on heating systems.You can select the following units on the testo 510 differential pressure gauge: Pa, hPa, mbar, mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm. You can also measure the flow in the ventilation duct with an optionally available pitot tube - from 10 to 100 m/s.Exact: For accurate measurements, the differential pressure measurement is temperature and air density compensated.Uncomplicated: Small, handy and easy to operate with only three buttons.Clever: Thanks to magnets on the back of the device you can work hands-free. In poor visibility conditions such as dark surroundings, the illuminated display makes your work easier.Secure: The differential pressure gauge is safely stored in a belt pouch with a clip-on protective cap, and thanks to a hand loop, it is also well secured during measurement.Ready to start: The silicone connection hose is included in the testo 510 set. So you can start your measurement directly.Product benefits:Differential pressure measurement from 0 to 100 hPaMagnets on the back of the device allow hands-free operation10 units for selection, display in Pascal selectable

3-phase energy meter for active power measurement with direct measurement in networks up to 500 V/63 A, with S0 output, with digital input, operating temperature up to +70°C and RS-485 interface, certified according to MID Directive

Multifunctional energy meter without display with integrated Modbus/TCP and PROFINET interface for measuring electrical parameters in low-voltage systems up to 690 V.

Multifunctional energy meter without display with direct Rogowski connection and integrated Modbus/TCP and PROFINET interface for measuring electrical parameters in low-voltage systems up to 690 V.

This single-phase energy meter for rail mounting is part of a new generation of single-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21. It provides precise and direct measurements of the energy consumption (50/60 Hz) of single-phase AC mains supplies.Characteristics• LCD display (with blue backlight)• Pulse output• LED displayPower supply: 230 VPower: 5 (80) AAccuracy class: 1.0Frequency: 50 / 60 HzDisplay mode: LCD 5+1 digits = 99999.9 kWhPower consumption: Temperature range: -20°C to 65°CLED: 1 flashing/pulsatingPulse output: 1000 imp/kWhVoltage: 12 to 27 VPower: 27 mAPulse value: 90 msValues are retained in the event of power failure

This single-phase energy meter for rail mounting is part of a new generation of single-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21. It provides precise and direct measurements of the energy consumption (50/60 Hz) of single-phase AC mains supplies.Characteristics• LCD display (with blue backlight)• Pulse output• LED displayTechnical dataPower supply: 230 VPower: 5 (40) AAccuracy class: 1.0Frequency: 50 / 60 HzDisplay mode: LCD 5+2 digits = 99999.99 kWhPower consumption: Temperature range: -20°C to 65°CLED: 1 flashing/pulsatingPulse output: 1000 imp/kWhVoltage: 12 to 27 VPower: 27 mAPulse value: 90 msValues are retained in the event of power failure

The LUPUSEC-XT relay with power meter is used to activate and deactivate third-party devices. For example, you can connect a lamp to the relay and programm the relay that it is alarm, time, or temperature controlled. Additionally, it is possible to control the relay via your mobile device. Due to its small chassis, the relay fits into most in-wall patress boxes, i.e. behind your light switch.Please note: This sensor is not compatible with the XT2 Plus!You can control the wireless relay via you alarm panel, programm it time or temperature controlled, or when you arm or disarm your alarm panelIt can send its alarm status to BUS systemsThe power consumption is displayed in the alarm panelWireless transmissionVery small chassisMax. 2300W 10A

This triple-phase energy meter for rail mounting is part of a new generation of triple-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21.Characteristics• LCD display (with blue backlight)• Pulse output• LED displayTechnical dataPower supply: 230 VPower: 10 (100) AAccuracy class: 1.0Frequency: 50 / 60 HzDisplay mode: LCD 5+2 digits = 99999.99 kWhPower consumption: Temperature range: -20°C to 65°CLED: 1 flashing/pulsatingPulse output: 800 imp/kWhVoltage: 12 to 27 VPower: 27 mAPulse value: 90 ms

Identify the true power guzzlers in your home with the energy cost meter from LogiLink. The display quickly and easily shows you how much energy and power the device requires. By inputting your personal electricity tariff, the meter will also calculate the total costs.Features:Large, rotating LCD display is easy to read from any directionMeasures power consumption and calculates energy costsSocket outlet power up to 3600 W, so you can easily connect any deviceRated voltage: 230 V, 50 HzMaximum current consumption: 16 A, 3600 WTotal energy consumption display: 0.0 - 9999 kWh180° rotating screenMeasuring accuracy: ±2%Suitable for a wide range of devices such as computers, games consoles, printers, televisions, set-top boxes, routers and othersWith increased contact protection

Comprehensive energy measurement is necessary to optimize energy consumption. WAGO now has new energy meters in its portfolio for this purpose, which offer numerous advantages. They use push-in connection technology with levers, making them very easy and time-saving to connect. The devices have a width of only 72 mm for direct measurement. This saves the user a lot of space in the control cabinet. In addition to the values for active and reactive energy, the energy meters also record mains frequency as well as current, voltage and power for all phases. The user can see all energy quality characteristics at a glance on the large illuminated display.Time saving at all levels thanks to Push-in CAGE CLAMP® and leverReal space saving: 72 mm wide (4PU)Measurement of supply and purchaseEnergy metering in 4 tariffsThe communication pro: M-Bus and Modbus® interface and 2 S0 pulse outputsFull transparency at a glance: Display of energy quality characteristics on an illuminated full-format displayConfiguration becomes intuitive: Sensitive operating elements and configuration app via Bluetooth®.

Identify the true power guzzlers in your home with the energy cost meter from LogiLink. The display quickly and easily shows you how much energy and power the device requires. By inputting your personal electricity tariff, the meter will also calculate the total costs.Features:Large LCD display with simple function key operationHelps you monitor time, voltage, active power, energy costs, CO2 emissions and more, saving you moneySocket outlet power up to 3600 W, so you can easily connect any deviceRated voltage: 230 V, 50 HzMaximum current consumption: 16 A, 3600 WTotal energy consumption display: 0.0 - 9999 kWhBuilt-in rechargeable batteryMeasuring accuracy: ±1%Suitable for a wide range of devices such as computers, games consoles, printers, televisions, set-top boxes, routers and othersWith increased contact protection

Identify the true power guzzlers in your home with the energy cost meter from LogiLink.The display quickly and easily shows you how much energy and power the device requires. By inputting your personal electricity tariff, the meter will also calculate the total costs.Features:Large LCD display with 1.2 m cable extension. Easy to read from any positionHelps you monitor time, voltage, actual performance, energy costs, CO2 emissions and more, saving you moneySocket outlet power up to 3600 W, so you can easily connect any deviceRated voltage: 230 V AC, 50 HzTotal energy consumption display: 0.0 - 9999 kWhBuilt-in rechargeable batteryMeasuring accuracy: ±2%Suitable for a wide range of devices such as computers, games consoles, printers, televisions, set-top boxes, routers and othersWith increased contact protection

P 4205 Flexible current clamp meter, 3000 A AC with 4 mm connectorThis innovative current clamp meter works on the principle of being able to carry out current measurements safely and quickly in conjunction with a multimeter. Due to the flexible design of the jaw, it is possible to insert small but also large cable diameters into the opening. By means of the slide switch, it is possible to set the measuring ranges of the current clamp meter to between 30 / 300 and 3000 A AC.Thanks to the intuitive design of the device, this current clamp meter is suitable for all sectors in which currents need to be measured, whether in the hobby sector or used professionally in industry.Technical features:Maximum cable diameter of up to 160 mmFlexible current clamp meter closureOutput connection: 4 mm connectorRange selection: manualTouch protection: yesCable length: approx. 100 cmA AC max.: 3000 A (current transformer)Battery: 1.5 V AAAOver-voltage category: CAT III 1000 V, CAT IV 600 VSafety: EN 61010-1, EN 61010-2-032, EN 61326-1Accessories: batteries and user manual

Thanks to the high measuring accuracy even stand-by loads can be precisely measuredCompact design offers easy installation in flush-mounting boxes or in surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25)Comfortable control via Homematic IP app and via Homematic IP Remote ControlCan be used with the Home Control Access Point in connection with the Homematic IP app, the HomematicCentral Control Unit CCU2 as well as with various partner solutionsThe Homematic IP Switch Actuator and Meter is part of the Homematic IP smart home system and offers switching of loads with a maximum power consumption of 1150 Watt as well as detection of the energy consumption. Thanks to its compact design, the actuator not only fits into standard flush-mounted boxes. It is also suitable for surface-mounted junction boxes (e.g. ELS Spelsberg Abox 25) with IP65 as well. In this way, the switch actuator and meter is also suitable for operation in damp basements or outdoor areas. The minor variations in measurement accuracy of only +/- 0,03 W ensure that also low consumption like the energy consumption can be precisely determined. The device can be controlled e.g. via the free Homematic IP app or Homematic IP Remote Control.

CO2 Monitor AIRCO2NTROL UP Dual Beam 31.5010For monitoring CO2 concentration in buildings where people are present, e.g. schools, offices, public facilities.High quality NDIR Dual Beam sensor for long term stable measurements.Large CO2 display with extended traffic light indication (green/yellow/blue/red)Display of room temperature (°C/°F) and humidityStorage of highest and lowest values of CO2, temperature and humidityAlarm function for CO2 concentrationHigh contrast display with 4 brightness levelsManual calibration function for CO2 sensorPower connection via USB Type-C cable and power supply (included) or a suitable USB power sourceBuilt-in rechargeable battery with 12-hour runtime (included).Indoor air quality is becoming increasingly important. After all, a good indoor climate promotes health and well-being. It also increases performance. In schools, offices and public facilities, this is particularly important. Basically, anywhere where many people are present at the same time.But when is breathing air ''good air'' In enclosed spaces, the CO2 concentration is one of the most important factors. The higher the level, the worse the air.Yet CO2 stays under the radar of the human senses. We can neither see nor smell it. The only perceptible effects are fatigue and dizziness. Or those of a viral disease. This is because the probability of transmission increases with CO2 exposure: the more exhaled air there is in the room, the greater the risk of contracting the Corona virus, for example, via aerosols.With the AIRCO2NTROL UP Dual Beam CO2 monitor you have the air quality permanently in view. The display shows the current CO2 content of the room air. In addition, the temperature and humidity appear in the lower display area.With your new air control system you can now ventilate in time and constantly maintain a good indoor climate.How the CO2 monitoring works with the AIRCO2NTROL UP Dual Beam from TFA? A high-quality NDIR Dual Beam sensor measures the current CO2 content in ppm (parts per million). ''Dual Beam'' means that with each regular measurement there is always a second control and calibration measurement to ensure a permanently stable measurement.The exact result is then visualized on the display, as a measured value and as a bar on a circular, graphic display. A traffic light display additionally visualizes the value. Green indicates good air. Yellow, blue and red warn of increasingly bad air.Values up to 600 ppm are considered ideal, by the way. The sensor of this device has a measuring range from 400 ppm to 5000 ppm.An audible alarm helps you to monitor. You can set the upper limit for the alarm signal yourself.Maximum and minimum values...