79 products were found matching your search for milling in 2 shops:

It turns the PD 230/E and PD 250/E lathes into a complete machining center.Incl. column (35x 400mm), mounting flange and fixing screws.Scope of delivery: Drilling and milling device WITHOUT lathe.

This boring head with MT3 shank is easy to use, perfect for boring end face, cylindrical, stepped hole and other processing. It features fine workmanship, and with high accuracy reaching 0.01 mm, that is applicable for working with the milling machine, machining centre. This boring set is made of

With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display.Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed range. Solid column with dovetail guide. Cutting head can be swivelled 90° to the right and left (indicated on a scale). The sleeve can be clamped and is prepared for the attachment of the fine feed adapter NO 24 254. Tool chuck with multi-range collet chucks type ER 20: One piece each 6 - 8 - 10 and 12 mm are included. Height adjustment of the cutting head by means of a hand wheel. Solid, face-milled cross table made of steel with three continuous T-slots according to MICROMOT standard (12 x 6 x 5 mm). All three handwheels with scale ring (1 turn = 2 mm).Technical data:230 V. 400 W. 50/60 Hz. Spindle speeds 200 - 4000 rpm. Throat 125 mm. Stroke: 30 mm. Column 120 x 100 x 430 mm. Table: 400 x 125 mm. Travel: vertical (Z axis) 220 mm, transverse (X axis) 310 mm, depth (Y axis) 100 mm. Dimensions: H = 750 mm, W = 550 mm, D = 550 mm. Weight: approx. 47 kg.Note:Clamping claws, cutters and workpiece are not included in the scope of delivery. New technology with brushless direct drive: quiet and vibration-free. Made in Germany.

Drill head can be swivelled though 360° (indicated on a scale).Sleeve with drill depth display by scale ring on the drill lever (1 graduation mark = 1 mm). Powerful PM motor. The Poly-V belt transmission ensures high torque, especially in the lower speed range. Tool holding by collets (1 each 6, 8 and 10 mm included). Cross table made of steel with 3 T-slots (MICROMOT standard (12 x 6 x 5 mm). For milling work, the drill head and column, as well as the sleeve, can be clamped using a toggle screw.Other technical data:230 V. 140 W. 50/60 Hz. Spindle speeds 280 - 550 - 870 - 1200 - 1500 and 2200 rpm. Sleeve stroke 30 mm. Column 35 x 400 mm. Table: 270 x 80 mm. Travel: X (transverse) 170 mm, Y (longitudinal) 65 mm. Installation area: 180 x 130 mm. Overall height: approx. 500 mm. Weight: approx. 17 kg.Important:For clean milling work, clamping the sleeve guide and also the cutting head to the column is recommended. With the FF 230, this is done in a flash using handy toggles! Hand wheel for height adjustment. Poly-V belt transmission for 6 spindle speeds from 280 to 2200 rpm. Fine feed, workpiece, clamping claws and cutters are not included in the scope of delivery. Hand wheels with adjustable scale ring (1 U = 1.5 mm, 1 graduation mark = 0.05 mm).

Continuous, 3-way ball bearing mounted shaft (no gear drive). Housing head made of die-cast aluminium. With 43 mm spindle neck (Euronorm). Large, convenient switch with emergency stop function. Clearly arranged table facilitates pre-selection of the appropriate speed for drilling and milling different workpieces.The milling motor operates at a voltage of 40 V, supplied by the control unit. In this range, the control characteristic is particularly favourable and guarantees high torque even in the lower speed range (cross table, drill stand and clamping claws are not included).Other technical data:Control unit with full-wave electronics for 230 volt connection. Secondary voltage 40 V DC. Maximum power consumption: 250 W. Spindle speeds can be continuously adjusted from 900 - 6000 rpm. Weight 4.2 kg. With collets of sizes 2.35 - 3 - 3.2 - 4 - 5 and 6 mm. This is done with a tensioning wrench and a locking pin.Note:Here we show the BFW 40/E milling motor combined with the BFB 2000 drilling and milling benchand the KT 150 cross table. Neither device is included in the scope of delivery of the BFW 40/E.

With 230-V direct supply (no additional control unit required).Infinitely variable speed preselection from 10,000 to 30,000 rpm and digital speed display. Sophisticated control of the brushless motor via rotor-position and speed sensors guarantees high torque, even in the lower speed range. Housing made of die-cast aluminium with 20 mm MICROMOT system fit and 43 mm spindle collar (European standard). Triple ball bearing spindle for high precision, rigidity and smooth running.Digital speed display.Manual speed preselection via an adjustment knob.Maintenance-free, brushless DC motor for 10,000 - 30,000 rpm.Housing made of die-cast aluminium for precise ball bearing fits.43-mm fit (European standard).20-mm MICROMOT system fit.Technical data:230 V. 50/60 Hz. 250 W. Spindle speeds: 10,000 - 30,000 rpm. Weight: 1200 g. With three ER11 collets, size 2.5 - 3.2 (1/8'') and 6 mm.

Brushless direct drive: quiet, vibration-free operation with high precision. Made in Germany.Infinitely variable speed preselection from 400 to 6000 rpm. Digital speed display. Drill head can be swivelled though 360° (indicated on a scale).With 230-V direct supply. Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed range. ER16 collets (includes one piece each of 6, 8 and 10 mm) for holding tools. Steel cross table with three T-slots.Technical data:230 V. 250 W. 50/60 Hz. Speed: 400 - 6000 rpm. Throat: 65 mm. Stroke: 30 mm. Column: Ø 35 x 400 mm. Table: 270 x 80 mm. Travel: X (transverse) 170 mm, Y (longitudinal) 65 mm. Installation area: 180 x 130 mm. Total height: approx. 500 mm. Weight: approx. 17 kg.

For drilling, milling, grinding, polishing, cleaning, carving and engraving. The extremely slim housing (made from glass-fibre-reinforced polyamide) with a soft component in the grip area allows the device to be guided with two fingers (pen grip).With a diameter of just 37 mm and a weight of just 270 g, it is extremely slim and light. Soft component in the grip area. Balanced special motor. Quiet and long lasting. With speed control 6000 - 22,000 rpm. Ground, ball-bearing spindle. High-quality MICROMOT steel collets: Even the smallest shanks are clamped absolutely centrically. Adjustment tools do not rattle and knock around! Spindle for tool changes can be locked at the push of a button. 20-mm system fit for use in MICROMOT drill stands and horizontal stands. Complete with 34 industrial-quality tools and 6 clamps (1 of each 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm). Everything has its fixed place in the stylish, super-sturdy plastic case.Technical data:230 V. 80 W. 6000 - 22,000 rpm. Weight 270 g. Insulated to Class 2.

Four-piece milling cutter set (6 - 10 mm)Cutters of 6 mm, 7 mm, 8 mm and 10 mm. Four-flute design according to DIN 844. Shafts 6.0 or 10 mm. Made from HSS-Co5. Comes in a wooden box with sliding lid.

The precise vertical milling machine for the finest work. Spindle speeds 5000 - 20,000 rpm. For working with extremely small cutters.Stable machine base made of cast iron, vertical guide and cross table. With play-free, readjustable dovetail guide in all axes. Diecast aluminium boom housing, with 24-pole special motor (balanced). For vibration-free working at high speeds.Tools held by MICROMOT system collets (steel, hardened, three slot), with one each of 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm. Table with three continuous T-slots (MICROMOT standard 12 x 6 x 5 mm). A sliding ruler facilitates the positioning of the cross carriage.Technical data:230 V. 100 W. 50/60 Hz. 5000 - 20,000 rpm. Table 200 x 70 mm. Travel: X (transverse) 134 mm, Y (longitudinal) 46 mm, Z (vertical) 80 mm. Machine base (installation area) 130 x 225 mm. Overall height 370 mm. Weight: approx. 7 kg. The clamping claws shown are included in the scope of delivery, but not the workpiece!

PF 250/BL drilling and milling machineIncludes column (Ø 35 x 400 mm), mounting bracket and fastening screws. The lathe's top slide is replaced with a slotted table (110 x 70 mm, with three T-slots). The lathe now functions as the compound table. The drill head is identical to that of the FF 250/BL milling machine. Includes three ER16 collets (6, 8 and 10 mm).(The lathe is not included in the scope of delivery)

Product description For precise remilling of valve seats on leaking taps Adjustable milling pressure via spring and regulating screw Suitable for all common fittings thanks to a cylindrical stepped threaded socket Milling tool can be replaced Supplied with sturdy plastic case

This boring head with MT2 shank is easy to use, perfect for boring end face, cylindrical, stepped hole and other processing. It features fine workmanship, and with high accuracy reaching 0.01 mm, that is applicable for working with the milling machine, machining centre. This boring set is made of

Selected Wolfram vanadium steel.Functional and robust design.Shank and milling part manufactured from a one-piece blank.Precise indentation and optimum concentricitywith simultaneous elasticity. Formachining soft and hard wood, non-ferrous andprecious metals, as well as plastic and plaster.Set consisting of:1 x ball shape 5mm1 x wheel shape 5mm1 x cone shape 5mm

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

The TE-RO 1255 E router is a high-quality, high-performance device that enables the expert to perform the most demanding milling tasks in solid wood, plywood and fibreboard. Depth setting with turret stop Fine depth adjustment with precise double tube guide Speed control electronics with powerful motor Infinitely adjustable milling depth Collet chuck Ø8 mm and Ø6 mm Parallel stop, calliper, copy sleeve Spindle lock for easy tool change Safe stand when changing tools Plastic insert protects the surface of the workpiece Chip shield Soft grip Cable clip

This robust chuck with taper arbour MT3-B18 is widely used with drill machines, milling machines, lathes, boring lathes and electric hand tools. It has a clamping range of 1-16 mm. This drill chuck is made of heat resistant steel with high hardness, high precision and corrosion resistance. Keyless

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing.Voltage supply: 12 VIdle speed: 20,000 rpmExtremely easy to manage with a diameter of only 35 mm. As well as a low weight (approx. 230 g), this product features a pleasant singing sound and free running due to the balanced motor with a ground, ball bearing spindle. Thanks to high-quality MICROMOT steel collets, even the smallest shafts are tensioned completely concentrically. Application tools do not rattle and knock around. Like all machines of this size, they are powered by a low-voltage safety voltage. A power supply unit with a minimum output of 1.0 A is required for operation. We recommend MICROMOT power supply units

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and craftsmen, and electronics engineers.• Ball bearing spindle made of ground steel. With lock button for tool changes.• Quiet, powerful 100 W motor. Controlled with full wave electronics of 5000 - 20,000 rpm.• Slim housing head made of die-cast aluminium. For precise ball bearing fits. More stability under extreme loads.• Uncompromising safety with protective isolation according to class 2.• With 34 application tools in industrial quality. All shafts Ø 2.35 mm. Complete with six triple slit steel collets from 1.0 to 3.2 mm.• High concentricity (max. 3/100 mm).• Application tools do not rattle and knock around.• With 20-mm MICROMOT front system fit for use in drilling and horizontal stands. In plastic case with 34 application tools.High-speed with a balanced DC special motor. Infinitely adjustable electronic speed regulator (full-wave electronics). Ball bearing precision shaft made of ground steel. With 6 triple slit MICROMOT steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm including clamping nut).Technical data:• Speed: 5000 - 20,000 rpm.• Power consumption: max. 100 W• Voltage: 220 - 240 V.• Stable gear head made of die-cast aluminium.• Main housing: glass-fibre-reinforced polyamide with soft component in the grip area.• Length: 230 mm.• Weight: 500 g.• Class 2 protective insulation.

Boom head with dovetail guide can be swivelled up to 90° (scale ring available). Enables bevelled drilling and versatile milling operations.Geared rack feed with return spring allowing effortless and sensitive operation. Practical drilling depth scale with adjustable limit stop (maximum travel 40 mm). 20-mm system fit for MICROMOT drilling and milling equipment. Solid, hard chromium-plated steel column (280 x 20 mm), projection (column inside to the centre of the tool) 140 mm.Face-milled table (220 x 120 mm) with parallel stop and scale. Tapped holes for securing the KT 70 MICRO compound table and holes to fix the drill stand itself are also provided. Weight: 2.2 kg.