350 products were found matching your search for proxxon in 1 shops:

Adjustable wrench RG 200Hot-forged from CrV steel.Ergonomic handle made from extremely sturdy, carbon-fibre-reinforced plastic (with hole). Slim head with ground jaws and a jaw angle of 22.5°. Easy-to-read millimetre scale for defining width across flats and for measuring workpieces. Accurate control of the movable jaw with smooth adjustment via a knurled screw.Length 200mmMax. Width across flats 24.5mm

4-jaw chuck with individually adjustable jawsFor clamping angular and asymmetrically shaped workpieces. Clamping range up to 80 mm. Chuck Ø 75 mm.

L-handle screwdriver setWith a versatile holder for in the workshop. Clear size information on the holder to enable easy storage of L-handle screwdrivers.The L-handle screwdriver is the solution when high torques are required when tightening and loosening screws. The ergonomic, asymmetrical handle makes it easy to work continuously. The two-component design with soft component that is easy to grip reduces pressure points at high force. Clear size indication on shaft (lasered) and handle. Graduated handle sizes according to the torque of the respective blade size. With cross-hole for hanging. Oil-resistant and acid-resistant two-component handle made from special rubber that does not stick. Clear size specifications on matt chrome-plated shafts made from chromium-silicon-manganese-molybdenum alloy special steel. Fully hardened and annealed tension free with a balanced ratio of torsional rigidity and toughness. Machined black tip for maximum precision in screw mounting. Reduces tool slippage.10-piece L-handle TX kit with holderContentsTX 8 TX 10 TX 15 TX 20 TX 25 TX 27 TX 30 TX 40 TX 45 TX 50

Straight, slim MicroSpeeder in a 7-piece set.Thanks to the 72-tooth inner ring, which is made from special high-alloy steel, force is applied from a lever movement of just 5°. The transmittable torques still far exceed DIN/ISO. Shafts made from CrV steel with optimum surface protection: double nickel plating and matt-finished chrome plating. Clearly readable sizes thanks to laser marking.With ratchet function on the ring side to save time when working without the need to change tools! Ideal for ''grooving'' in tight spaces. Use when removing and fitting engines, on automatic transmissions, on rear axles and much more.As indicated here, one extra-long piece is provided for the sizes 8, 10, 13, 16, 17, 18 and 19 mm. In a sturdy steel box (powder coated).

3/8'' hexagon socket bit, HX 6 mm, 50-mm longHead made of chromium-silicon-manganese-molybdenum steel. Socket made of CrV steel.

With ratchet mechanism and lever on the ring side to switch between clockwise and anti-clockwise rotation. To save time when working without the need to change tools. Ideal for working on flat surfaces thanks to the 15° offset on the ring side.

It turns the PD 230/E and PD 250/E lathes into a complete machining center.Incl. column (35x 400mm), mounting flange and fixing screws.Scope of delivery: Drilling and milling device WITHOUT lathe.

Strong and versatile problem solver for the fine job in crafts and industry! Made in the EU.High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart.With a battery charge, you can work for at least 30 minutes even when used powerfully. No one can do more in this performance class!With transmission head made of die-cast aluminum for precise ball bearing adjustments. Main housing made of glass fiber reinforced POLYAMIDE with soft component in the grip area.With balanced special DC motor, strong, quiet and durable.For Drilling, Milling, Grinding, Polishing, Cleaning, Disconnect, Engrave, Sign.With continuously variable electronic speed control for high torque even in the lower speed range. Double ball bearing precision shaft made of ground steel and six 3-way slotted MICROMOT steel clamps (1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm) ensure high concentricity. No chatter and beating of the insertion tools. With 20 mm MICROMOT system fit for use in drilling and horizontal stands. In a plastic case with 34 insertion tools, as shown here. The scope of delivery includes Li-ion Li/A2 (10.8 V) battery and LG/A. battery charger The new battery commissioning/a is TOP and comparable in performance to our mains-connected device. For working outdoors or when you need to use an extension cable, its use brings great advantages.Technical Data:10.8 V. 7,000 - 23,000 bpm. Length 270 mm. Weight approx. 700 g (incl. battery). The battery IBS/a with complete equipment is packed in a practical, stylish and super-stable plastic case made of high-quality PP. A side sticker defines the content.

The problem solver for the workshop.The micro-speeder!The new ring ratchet spannersare second to none when it gets tight!Dimensions: 8 mm x 9mm

Boom head with dovetail guide can be swivelled up to 90° (scale ring available). Enables bevelled drilling and versatile milling operations.Geared rack feed with return spring allowing effortless and sensitive operation. Practical drilling depth scale with adjustable limit stop (maximum travel 40 mm). 20-mm system fit for MICROMOT drilling and milling equipment. Solid, hard chromium-plated steel column (280 x 20 mm), projection (column inside to the centre of the tool) 140 mm.Face-milled table (220 x 120 mm) with parallel stop and scale. Tapped holes for securing the KT 70 MICRO compound table and holes to fix the drill stand itself are also provided. Weight: 2.2 kg.

MICRO Click torque wrench with ratchet function and automatic release. 1/2'' (1.27 cm)High precision in accordance with DIN/ISO. Tolerance: +/- 3%. Large, easy-to-read scale for exact adjustment of the desired torque by rotating the knurled sliding ring on the end of the handle. Fix the pre-selected position by sliding the ring inwards.Ratchet mechanism with switch for clockwise and anti-clockwise rotation. Automatic quick release: A clearly audible and noticeable click signal indicates when the pre-selected torque is reached.With 1/2'' (1.27cm) square drive. For torques from 40 to 200 Nm.

Machine viceManufactured from die-cast zinc. With three machined bearing surfaces. Plus a groove to fit the longitudinal stop for bench drill TBM and drill stand MB 140/S.Vertical and horizontal prism for round material. Jaw width 50 mm. Jaw height 10 mm. Maximum clamping width 34 mm.

Billet ratchet 1/4''. The sturdy one!With flawless toothing: several of the 72 teeth engage simultaneously and transmit extremely high torque. Switch lever between clockwise and anti-clockwise rotation. Unlocking mechanism: release the inserts at the push of a button. Head and shaft forged from one piece of CrV steel, 2x nickel-plated and matt chrome-plated. Handle made of oil- and acid-resistant TPR (thermoplastic rubber) with practical hole for mounting.

With multiple ball-bearing transmission in a strong, die-cast aluminium housing head.• Also suitable for right-angle cutting of rods. • Special balanced, powerful, quiet and long-lasting DC motor. • Infinitely adjustable speed regulator (full wave electronics). • Main housing made of glass fibre-reinforced POLYAMIDE. With MICROMOT steel collets (6 per unit: 1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm).Technical data:220 - 240 V. 100 W. 3000 - 15,000/min.Length 270 mm. Weight: 550 g.Class 2 protective insulation.

Fine-cut table circular saw FETFor precision engineering, modelling, mould-making, toy manufacturing, architects, model carpenters and fitters.For separating wood, non-ferrous metal, plastic, Plexiglas, GFRP plates, foam and many other materials. Robust construction due to load-bearing parts and flat-milled tabletop made of die-cast aluminium.Low-noise drive thanks to the special DC motor with Optibelt timing belts. Ball-bearing-mounted saw blade shaft. Carbide-tipped saw blade 80 x 1.6 x 10 mm (36''). In addition, a push stick and an unslotted sawing gap cover made of ABS for the closest tolerances between the saw blade and the table.Technical data:230 V. 7,000/min mitre can be fixed infinitely up to 45°. Table size: 300 x 300 mm. Cutting depth 1 - 22 mm: saw blades from 50 - 85 mm (with 10-mm hole) can be used. Weight approx. 6 kg. The finely adjustable, precise and stable length stop has decisive advantages: after a rough adjustment, measurements can be corrected by less than 1/10 mm using the adjusting screw. The 45° swivelling and height-adjustable saw blade and the angle stop mean the tool can be used to produce double mitre cuts.

With ratchet mechanism and lever on the ring side to switch between clockwise and anti-clockwise rotation. To save time when working without the need to change tools. Ideal for working on flat surfaces thanks to the 15° offset on the ring side.

Standard ratchet L (large) 1/2'' (1.27 cm).With direct changeover to theratchet mechanism. Effortlessratchet transmission transfers hightorque values.Application tools are disengagedat the push of a button.

Complete engraving set with ''tasting glass'' in plastic caseEngraver GG 12 with DC special motor, quiet and durable.Housing made of glass fiber reinforced POLYAMIDE. Including power supply unit, test glass, templates and instruction booklet as well as all necessary application tools: 1 diamond grinding pencil each in spherical shape 1.0 and 1.8 mm for scribing and lining. 1 silicon carbide grinding pencil each in cone and bullet shape for matting. 1 grinding pencil each made of high-grade corundum in spherical and cylindrical shape for grinding and engraving. Small parts holder for clean storage of rotating insert tools. Complete with 0.5 A plug-in power supply for 230 V.Technical data for the GG 12:DC voltage 12 - 18 V. 20,000/min. Length 145 mm. Weight 50 g (without supply cable).Each part has its fixed place in the shapely and super-stable plastic case.

SlimLine double-ended ring wrench set, 11 pieces.From 6 to 32 mm. In accordance with DIN 838 and ISO 3318.Wrench sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32 mm. Clearly packed in a stable cardboard box.

Socket wrench inserts and controls - for powerful use!