966 products were found matching your search for wrench in 3 shops:

Simplifies handlingSlide function for one-handed holder opening and easy, quick removalLowers your costsLong service life thanks to ideal corrosion protection with perfect fit accuracy in the screwExtraSpace-saving ProStar allows individual wrench keys to be removed easily without moving the others. All keys from T5 to T45 in one setApplicationFor all TORX® screw tasksBit holder:Only for 6-mm slimBitsBladeChromium vanadium steel, fully hardened, titanium silver

Yato Ring ratchet wrench set 7-piece Improve your toolbox with the Yato Ring Wrench Set - 7-piece. This handy set contains 7 ring ratchet wrenches in different sizes. supplied in a plastic holder. Made from durable chrome vanadium steel. these ring spanners are perfect for tightening and loosening nuts and bolts. Add this compact and practical set to your tool collection and make your handyman work a lot easier. - Rotatable ratchet ring wrenches - 7-piece: 10. 12. 13. 14. 15. 17 and 19 mm - Made of polished chrome - 72 teeth - Compact and handy Warranty: 2 years Content: Kit

This fan clutch nut wrench & water pump holder removal tool kit for BMW is used to remove water pump on models with temperature dependent viscosity drive fans. It is suitable for BMW engine models such as M4. M10. M20. M30. M40. M44. M50. M52. M52TU, M54. M56. M60. M70. M73. S14. S38. S54. S50B30.

Blade: Chrome-vanadium steel, through hardened, chrome-plated.Handle: Wiha Classic T-handle.Application: For high torque transfer with minimal effort.Extra: ChromTop® blade tip for the highest accuracy.

Simplifies handlingSlide function for one-handed holder opening and easy, quick removalApplicationFor all TORX® screw tasksBit holder:Only for 6-mm slimBits

Increases your efficiencyWiha MagicSpring® holding function holds all Torx® screws without a magnetSimplifies handlingAlways the right wrench in the right placeSaves timeEnsures order: Removal and defined insertion into the holder is child's playApplicationFor powerful tightening and loosening of TORX® screws. With screw holding function for use in hard-to-reach placesBit holder:Only for 6-mm slimBits

Saves spaceCompact and space-saving solutionSimplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°ExtraTORX® ball head allows for screwing at an angle of up to 25°. Common wrench sizes can be stored neatly in the holder. With extended TORX® profile behind the ball head. Easy and fast operation thanks to a fixed stop point for wrench keysApplicationFor all TORX® screws that are difficult to reachBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

HandleWiha T-handle ClassicNoteReinforced blade due to long lengthApplicationFor apply high torque without fatigueBladeChromium vanadium steel, fully hardened, nickel-plated finish

Simplifies handlingAlways the right wrench in the right placeSaves timeEnsures order: Removal and defined insertion into the holder is child's playIncreases your efficiencyWiha MagicSpring® holding function holds all Torx® screws without a magnetApplicationFor inserting and tightening TORX® screws in hard-to-reach placesBit holder:Only for 6-mm slimBits

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Simplifies handlingAlways the right wrench in the right placeSaves timeEnsures order: Removal and defined insertion into the holder is child's playExtraSpace-saving ErgoStar holder allows for easy removal of each wrench key without having to move others thanks to its mechanical operation. TORX® ball head (from size T9) allows for screw fitting at an angle of up to 25°. With extended TORX® profile behind the ball headApplicationFor all TORX® screws that are difficult to reachBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

Saves spaceCompact and space-saving solutionSimplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°ExtraTORX® ball head allows for screwing at an angle of up to 25°. Common wrench sizes can be stored neatly in the holder. With extended TORX® profile behind the ball head. Easy and fast operation thanks to a fixed stop point for wrench keys.ApplicationFor all TORX® screws that are difficult to reachBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Increases your efficiencyImproved accessibility thanks to short shankProtects your healthReduces the risk of injury by increasing the space for manual workSimplifies handlingSlide function for one-handed holder opening and easy, quick removal

StandardsBased on ASME B18.3ExtraSpace-saving ProStar allows individual wrench keys to be removed easily without moving the othersApplicationEspecially for hard-to-reach imperial-sized screwsBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Increases your efficiencyImproved accessibility thanks to short shankLowers your costsDurable thanks to high-quality chrome-plated hex key surface to protect against rustSaves spaceAll common keys included in a compact and space-saving designStandardsIn compliance with ISO 2936LExtraBall head allows for screw fitting at an angle of up to 25°. Thanks to its compact shape, this holder fits perfectly into any ruler pocket. Common wrench sizes can be stored neatly in the holderApplicationSpecially developed for hard-to-reach screwsBit holder:Only for 6-mm slimBitsBladeChromium vanadium steel, fully hardened, matt chrome-plated finish

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Lowers your costsDurable thanks to high-quality chrome-plated hex key surface to protect against rustSaves spaceAll common keys included in a compact and space-saving designStandardsIn compliance with ISO 2936LExtraBall head allows for screw fitting at an angle of up to 25°. Thanks to its compact shape, the Wiha Compact holder fits perfectly into any ruler pocketApplicationSpecially developed for hard-to-reach screwsBit holder:Only for 6-mm slimBitsBladeChromium vanadium steel, fully hardened, matt chrome-plated finish

Saves spaceCompact and space-saving solutionSimplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°StandardsIn compliance with ISO 2936LExtraBall head allows for screw fitting at an angle of up to 25°. Common wrench sizes can be stored neatly in the holder. Easy and fast operation thanks to a fixed stop point for wrench keysApplicationSpecially developed for hard-to-reach screwsBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

Hexagon ball head MagicRing®,10 pieces, brightly colouredStrikingly neat - the colourful Wiha ErgoStar.

Saves spaceCompact and space-saving solutionSimplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°StandardsIn compliance with ISO 2936LExtraBall head allows for screw fitting at an angle of up to 25°. Common wrench sizes can be stored neatly in the holder. Easy and fast operation thanks to a fixed stop point for wrench keysApplicationSpecially developed for hard-to-reach screwsBit holder:Only for 6-mm slimBitsBladeChrome-vanadium steel, fully hardened and burnished

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Increases your efficiencyImproved accessibility thanks to short shankProtects your healthReduces the risk of injury by increasing the space for manual workSimplifies handlingSlide function for one-handed holder opening and easy, quick removalStandardsIn compliance with ISO 2936LExtraIncreases the space for manual work by more than 30%, thereby reducing the risk of injury to knuckles and fingertips thanks to the 95° angle of the wrench key. Improved accessibility as the height of the wrench key head has been reduced by up to 15%. Ball head allows for screw fitting at an angle of up to 25°. Space-saving ProStar allows individual wrench keys to be removed easily without moving the othersApplicationSpecially designed for hard-to-reach screws and for bottlenecksBit holder:Only for 6-mm slimBitsBladeChromium vanadium steel, fully hardened, matt chrome-plated finish

Simplifies your workBall head facilitates access to screws and allows working at an angle of up to 25°Simplifies handlingAlways the right wrench in the right placeSaves timeEnsures order: Removal and defined insertion into the holder is child's playIncreases your efficiencyHolds all hex screws without a magnet with Wiha MagicSpring® holding functionLowers your costsDurable thanks to high-quality chrome-plated hex key surface to protect against rustStandardsIn compliance with ISO 2936LApplicationSuitable for lifting out recessed standard screws as well as for inserting and screwing into horizontal, inclined or deep blind holesBit holder:Only for 6-mm slimBits