20432 products were found matching your search for moisture in 3 shops:

This non-greasy lotion provides 4x instant hydration for a stronger skin barrier.

HumiLED fix slim - the easy to install lamp for cellars, garages, car ports, warehouses etc.IP65 (protected against water jets and dust)Stainless steel wall and ceiling mounting clipsTrapezoidal fixture for ''swinging'' mountingHousing made of robust and durable plasticMoisture-proof PG cable gland on the sideIncl. stainless steel fixing plus pendulum/suspension device, screws, dowels

This non-greasy, comforting balm is clinically proven to intensely hydrate and strengthen the skin barrier.

Moisturizing and mattifying face cream with hyaluronic acid for combination and oily skin.

Moisturizing and mattifying face cream with hyaluronic acid for combination and oily skin.

This non-greasy lotion provides 4x instant hydration for a stronger skin barrier. Your skin #39;s moisture barrier is made up of over 100 ceramides to keep it naturally hydrated and healthy.

Lightweight face cream refill with hyaluronic acid for normal to dry skin.

Lightweight face cream refill with hyaluronic acid for sensitive and reddened skin.

Lightweight face cream with hyaluronic acid for normal to dry skin.

HumiLED fix slim - the easy to install lamp for cellars, garages, car ports, warehouses etc.IP65 (protected against water jets and dust)Stainless steel wall and ceiling mounting clipsTrapezoidal fixture for ''swinging'' mountingHousing made of robust and durable plasticMoisture-proof PG cable gland on the side

LLMS01 LoRaWAN Leaf Moisture SensorLoRaWAN 1.0.3 Class AUltra-low power consumptionMonitor Leaf moistureMonitor Leaf temperatureMonitor Battery LevelBands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865AT Commands to change parametersUplink on periodicallyDownlink to change configureIP66 Waterproof EnclosureIP67 rate for the Sensor Probe8500mAh Battery for long term useThe Dragino LLMS01 is a LoRaWAN Leaf Moisture Sensor for IoT of Agriculture. It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as : watering, moisturizing, dew, frozen. The probe is IP67 waterproof.LLMS01 detects leaf's moisture and temperature use FDR method, it senses the dielectric constant cause by liquid over the leaf surface, and convert the value to leaf moisture. The probe is design in a leaf shape to best simulate the real leaf characterizes. The probe has as density as 15 leaf vein lines per centimeter which make it can senses small drop and more accuracy.The LoRa wireless technology used in LLMS01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.LLMS01 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.Each LLMS01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.ApplicationsSmart Agriculture

Measuring device for material and wood moisture measurementIdeal for on-site checks, simply touch the object with the metering ball, measures up to 40 mm deep without damaging the object• MAX/MIN function,• Backlighting• Measuring principle: capacitive,• Measurement range: 0 to 100 digits,• Incl. 9V block battery280 x 45 x 33 mm, 240 g

The new innovative MÜLLER-LICHT Aqua-Promo 2/120 white wet room moisture-proof luminaire is the ideal choice for all applications requiring high IP protection. IP65 protection class products have optimum protection against dust and water ingress.Thanks to the innovative use of materials in the housing, the Aqua-Promo 2/120 offers efficient lighting with improved light reflection and reduced energy consumption of up to 20%.Thanks to its IP65 protection class properties, the moisture-proof luminaire is also ideal for wet rooms.The Aqua-Promo is temperature-resistant from -20 to 40°C, allowing it to deliver reliable operation both in colder rooms and at higher ambient temperatures, making it ideal for a broad range of applications.The Aqua-Promo starts up instantly, making it the ideal choice for work environments where stable, eye-friendly lighting is a must.Neutral white light for optimum workplace lighting (4000 K).

Moisture analyser PCE-GMM 10 for grain for 17 grain types small sample size LC display automatic temperature compensation manual measured value correction possible Product benefits:The PCE-GMM 10 grain moisture meter is a compact moisture meter for up to 17 different types of grain. This grain moisture meter is an important aid in mills, granaries or also in the processing industries of grains and pulses. The grain moisture meter helps to protect the bulk material from spoilage due to excessive moisture before storage, processing or buying and selling. The grain moisture meter requires only a very small sample volume to measure the moisture content. Within a short time, the grain moisture is shown on the display. The grain moisture meter is operated via the 4 keys. The tester is operated with a 9 V block battery. With its compact dimensions, the grain moisture meter for whole grains can be used very easily as a mobile device.

This sensor switches on your garden irrigation pump or the solenoid valve on when the soil is dry, and turns off when enough moisture is in the soil. The measuring head is buried in the soil at the depth, where it is supposed to measure and is connected via a cable to the base unit. There is a 2-m cable included, but the sensor cable can be extended using a conventional 2-pin cable up to 20 m. The device is operated using a commercially available plug-in power supply (12 V/DC stabilized, > 130 mA, jack 3.5 mm). If the garden is to be watered only at certain times of day or days of the week, then plug the power supply into a commercially available timer and program this accordingly. If the soil moisture sensor gets power from the power supply unit, it will start to work.Operating sequence:After switching on the operating voltage, the soil moisture is measured. If the soil is too dry, the connected pump is switched on for 18 - 30 minutes. If the soil is sufficiently wet, the device goes into ''Pause'' mode for approximately 18 - 30 minutes and then makes a new measurement. This continues in an endless loop until the operating voltage is switched off. Technical dataOperating voltage 12 V= stabilized > 130 mA, 3.5 mm jack socketDisplay 3 LED's: ''On'' ... ''Off'' ... ''Pause''Switch contact potential-free relay contact 1 x On max. 3 A (up to 25 V or also 230 V~, see description)Connections screw terminalsTime delays 18 - 30 minutes eachInfinitely adjustable thresholdThe base must be mounted in a dry area.Soil moisture sensor diameter dimensions approx. 30 x 64 mm plus 2 galvanized metal pins approximately 4 x 40 mmBase unit dimensions approx. 72 x 50 x 28 mm (without mounting brackets)

This new material moisture meter allows a user-friendly, fast and non-destructive moisture measurements on all types of building materials, wood, and the walls and ceilings of buildings.The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button.Besides the measured values, the device shows a settable message ''Dry, Wet or Risk'' and also makes an audible warning tone for high humidity values.To perform a fast and accurate measurement, this meter uses the electrical resistance of the material and also performs a self-calibration after switching on the device.The variety of functions and the user-friendly handling of this device makes it suitable for all building owners, architects, craftsmen and hobbyists.Replaceable test-probesMoisture measurement of all building materials such as Plaster, Gypsum and masonry, same as woodDamage-free measurement with a metal sensorMaterial measurement depth of 20 to 40 mmSelf-calibration when the device startsLCD display with backlight illuminationShock and impact resistant housingEasy to use and fast measurement rateData-Hold and Auto-Power-OffDisplay (Dry, Risk, Wet) for good-bad readingAccessories: Batteries, carrying case and user manual

High-quality, user-friendly and universal wood and material moisture meter.The appliance is equipped with an LCD display that displays humidity and ambient temperature measurements. It is also equipped with a LED display for rapid pass-fail evaluation of the measured values.Freshly harvested timber has a moisture content of about 50% and after a year it is still approx. 30 - 35%. Burning wood with a high moisture content in stoves decreases their efficiency and increases the outputof pollutants, such as soot and particulate matter. It can also cause gloss soot to accumulate in chimneys, which can lead to flue fires. This device is ideal for the wood storage, inspection during the heating season or use in the construction industry.Features:• Measures the moisture of wood and cardboard as well as building materials such as plaster, cement and masonry• LCD display with backlight• Interchangeable probes• Shock and impact resistant enclosure• Easy to use• Measured value hold function and automatic shut-off• LED display (green, yellow, red) for pass-fail readings• Supplied accessories: 9 V battery, 2x spare probes and user manualTechnical data:Measurement ranges:Wood, cardboard: 6 - 60% ± 2.0%Mortar, plastic: 0.2 - 2.9% ± 0.1%Ambient temperature: 0 - 40°C/32 - 99°FOperating voltage: 9-V batteryDimensions (W x H x D): 51 x 122 x 45 mmWeight: 115 g

This set consists of 3 Isdin Isdinceutics products: Hyaluronic Moisture Normal To Dry Skin 50g, Essential Cleansing 27ml and K-Ox Eyes 3g.

Universal stainless steel housing for the installation of the moisture sensor SHOP HY-ANA-10V or SHOP HYTE-ANA-10V.The high-quality, functional housing offers optimum protection of the electronics for a wide range of applications.The moisture module can be inserted directly into the metal housing with the sensor head. The spiral gland must then be screwed in to seal the cable outlet and ensure strain relief.Pass. Metal housing with anti-kink protection for the HYANA humidity module and HYTE-ANA humidity/temperature module.

Soil moisture meter Measuring device for determining the moisture in soil with 250 mm probeMeasuring range up to 50%WaterproofProduct benefits:The amount of water in soil plays an important role in many areas of agriculture, horticulture and environmental protection. This is because the moisture content of the soil allows conclusions to be drawn about behaviour, fertility and water storage capacity, among other things. The soil moisture meter from PCE Instruments with a 250 millimetre-long probe has been specifically designed to determine the moisture content of soils quickly, easily and precisely. The user-friendly soil moisture meter reliably indicates the water content in soils in the range from 0 to 50 percent with a resolution of 0.1 percent. Using the soil moisture meter is simple and effective. After the sensor with a two-pole moisture electrode is plugged onto the enclosure, the probe can be secured by screwing the ring tight. When the protective cap of the sensor head is removed, the soil moisture meter is ready for use.