11 products were found matching your search for mortar in 1 shops:

FIS VL 300 T fischer injection mortarThe fischer 300 T injection mortar is a 2C vinyl ester-based injection system. Resin and hardener are only mixed and activated when they are pressed out of the static mixer. The injection mortar can be applied particularly economically using a commercially available sealant injection gun. Opened cartridges can be reused using a new static mixer. With approved system components such as anchor rods FIS A, internal thread anchors and injection anchor sleeves for fastenings in concrete and masonry, the hybrid system can be used for a host of applications, both indoors and outdoors.AdvantagesThe FIS VL is approved for use in cracked concrete and masonry, where it achieves a high load capacity.The vinyl ester resin-based injection mortar enables anchoring in water-filled boreholes in concrete and to ensure rapid work progress.The temperature resistance of the FIS VL injection mortar from -40°C to +120°C enables a solid load level, even at high temperature requirements, thereby increasing application flexibility.

fischer FIS V Plus 360 S high-performance injection mortarThe fischer FIS V Plus high-performance injection mortar is the universal all-rounder to meet the most stringent requirements. The styrene-free vinyl ester hybrid mortar with its numerous fastening elements is approved for fastenings in cracked and uncracked concrete as well as masonry. However, the injection mortar is also used with approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather-facing reconstruction system FWS II and the TherMax stand-off installation system. The shorter curing time of the FIS VW Plus High Speed variant allows you to work quickly, even at low temperatures.AdvantagesThe FIS V Plus injection mortars boast a wide range of system approvals, such as in cracked and uncracked concrete, masonry and for rebar connections. This makes FIS V Plus the universal injection mortar family with guaranteed safety for almost every application.The ETA approval for a useful life of 100 years provides long-term security for all applications.The approved use in a water-filled borehole allows a wide range of applications, even in adverse environmental conditions.

FIS V Zero 300 T injection mortar

FIS V Zero 360 S injection mortar

fischer FIS HB 360 S Highbond injection mortarThe fischer FIS HB 360 S Highbond special mortar is a system component of the fischer Highbond system FHB II for fastening in uncracked and cracked concrete. The cartridge contains a styrene-free vinyl ester mortar. The special mortar can be used with fischer FHB II-A S Highbond anchor rods (standard), FHB II-A L Highbond anchor rods (long) made of zinc-plated steel, stainless steel and highly corrosion-resistant steel. When tightening the hexagon nut, the cones on the anchor rod are pulled into the mortar shell, which is braced against the borehole wall. With the fischer FHB II Highbond system, railings, machines and steel structures are securely fastened, both indoors and outdoors.AdvantagesThe FHB II Highbond system achieves the highest load values in cracked concrete. This reduces the need for attachment points and smaller anchor plates.The FIS HB Highbond special mortar can be applied with the FHB II-A anchor rod S (short version) or L (long version). This means that the most economical solution can be used as required.

fischer DEC ZEG repair mortar cement greyfischer Express Cement Premium DEC, the ready-to-use, sprayable repair mortar, can be used in a variety of applications. For example, during renovation work in masonry, when fixing roof tiles, when sealing boreholes or general repair work. The virtually odourless mortar can be easily applied thanks to its stable consistency. It offers excellent weathering, ageing and UV resistance. The 1-C polymer dispersion can be applied at temperatures from +5°C to +40°C and is temperature resistant from -30°C to +75°C. fischer Express Cement Premium DEC can be reused. It is protected against frost in the cartridge up to -15°C.AdvantagesThe ready-to-use, sprayable joint mortar saves having to add water and time-consuming pre-mixing and enables clean and targeted work. This therefore prevents contamination of the edge areas and material waste.The good adhesion, even on slightly moist surfaces, allows virtually weather-independent application and prevents forced interruptions.

Application: Transport of mortar - sand - water or tools on the construction site as well as in the garden for e.g. soil - bark mulch - fertilizer or plantsSturdy design: suitable for transporting heavy materials thanks to integrated cross bottomWith liter measure (inside): 2 to 20 lMade from recycled materialsBlue Angel'' eco-labelDiameter: inside 335 mm, rim 365 mmMade in Germany

The FISCHER heavy-duty fixing set is a complete set for simple and safe mounting of heavy loads such as awnings, satellite dishes, canopies or similar.The set is supplied complete with all components required for assembly: Injection mortar FIS P 300 T, threaded rods, sieve sleeves and static mixers. The FIS P 300 T injection mortar used is a two-component polyester hybrid mortar in a cartridge that can be inserted into a sealant gun. The two components of the injection mortar are not mixed until they are squeezed out by the static mixer.Advantages/Benefits:Highest loads also in the perforated brickUniversally applicable in almost all building materialsSimple and reliable installationProcessing with commercially available silicone squeeze gunLarge range of accessoriesWork interruptions possibleHeavy duty mounting set, for mounting:awningssatellite dishescanopiesbalustradesconsoleswall cupboardsWashbasins, toilets etc.Suitable for:vertically perforated bricks (e.g. Poroton / Unipor)perforated lime sand brickHollow block of lightweight concreteSolid brick / sand-lime solid brickSolid lightweight concrete bricknatural stoneaerated concrete (gas concrete), special drill requiredHollow brick ceilingsContent:1x cartridge multifunctional mortar (300 ml),6 x threaded rod M 10 x 170 gvz,6 x washers and nuts,6 x sieve sleeves FIS H 16 x 130 K,2 x static mixers FIS MR Plus

Measuring device for material and wood moisture measurement as well as for measuring soft building materials (mortar, concrete and plaster)For example, for simple inspection of firewood, building materials, etc.• With temperature display• Automatic shut-off• Measuring range wood 6 - 42%• Measuring range material 0.2 - 2%• Temperature 0 - 40°CIncludes hand strap and batteries 4 x LR4480 x 40 x 20 mm, 80 g, SB

The professional cordless dispensing device can be used in combination with 150-ml, 300-ml, 360-ml and 390-ml cartridges. The dosing function enables processors of Fischer injection mortars to adapt the mortar quantity to the mounting requirements with particular precision and efficiency. In addition, the dispensing speed of the mortar can be adjusted to the application via a controller. Thanks to its robust design, the device can withstand even the most adverse conditions on the construction site. With the corresponding Fischer high-performance mortars, the cordless dispensing gun offers a perfectly designed system. The battery-powered dispensing gun is also compatible with all Cordless Alliance System (CAS) batteries and chargers worldwide.

Moisture meter can be used to determine the moisture level of wood (including cardboard or paper) or hardened materials (gypsum, concrete and mortar). Instantly displays the moisture level in the material. Can also measure the ambient temperature. Can measure humidity level and ambient temperature. Insert the probes into the wood, wall or material to be measured. Wood range 6 to 60%, building material range 0.2 to 2.9%. Compact size, can be carried in any pocketQuick and simple single-button operationCan switch between °C/°F2 steel pin probesBattery status indicatorAutomatic shut-off functionMeasures the ambient temperatureTechnical specifications:Ambient temperature: 0 to 40°CWeight: 41 g (with batteries)4x 1.5 V batteries type: LR44 or equivalentDimensions (H x W x D): 85 x 45 x 16 mm