78 products were found matching your search for navilock in 1 shops:

GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses USB 2.0.Technical details Connector: WTB, USB 2.0, 6 pin, pitch 1.0 mmChipset u-blox 6 GPS SuperSense® Sensitivity -160 dBmAssistNow offline (14 days almanach)DGPS, WAAS, EGNOS and MSAS supportShort TTFF (Time To First Fix) also at low signal level Support NMEA 0183 protocolInternal patch antenna Package content GNSS modulePackage Poly bag

Use this GPS receiver with PPP (Precision Point Positioning) for very precise positioning tasks.PPP in conjunction with SBAS is used for high-precision applications in taking measurements, maritime and agriculture (precision farming).Technical data• Chipset: u-blox NEO-6P• PPP (Precision Point Positioning)• Hybrid chipset for GPS/SBAS (WAAS, EGNOS, MSAS)• Integrated anti-jamming technology• Integrated A-GPS technology with AssistNow online and AssistNow offline• Built-in GPS patch antenna• Reception frequency: GPS L1 1575.42 MHz• Receiver sensitivity: -160 dBm• Update rate: 1 Hz• Positioning accuracy: SBAS + PPP • Auto baud rate up to 115,200 bps (default 38,400 bps)• Central fastening thread with central cable• Optional adapter cable to RS232 SUB-D9 or USB• Cable length: 5.00 m• Operating temperature: -20 °C ~ 65°C• Dimensions (LxWxH): 62 mm x 21 mm• Power supply: 5 V via PS/2 or USB• Power consumption: 60 mA at 5 V• Housing: IPX7 protection classSystem requirements• Windows 2000/XP/Vista/7/8/CE, Windows Mobile 4/5/6, Mac, Linux 2.4.x• MD6 connection cablePackage contents• GNSS receiver• Stainless steel mounting hardware

GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses RS232.Technical details Connector: WTB serial RS-232, 6 pin, pitch 1.0 mmChipset u-blox 6 GPS SuperSense® Sensitivity -160 dBmAssistNow offline (14 days almanach)DGPS, WAAS, EGNOS and MSAS supportShort TTFF (Time To First Fix) also at low signal level Support NMEA 0183 protocolInternal patchantennaPackage content GPS moduleCD-ROMPackage Poly bag

GNSS Beidou Galileo Glonass GPS NL-8012U u-blox 8 USB 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.Technical data• Connection: USB 2.0 type A plug• u-blox 8 UBX-M8030-KT chipset• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1: 1602.5625/1615.5000 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO E1, 1575.4200 MHz QZSS L1, 1575.4200 MHz• Processes the signals from up to 72 satellites simultaneously• Supports AssistNow online/offline SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• USB specification 2.0• Auto baud rate up to 115,200 bps• Update rate: Single GNSS: 18 Hz (e.g. GPS solo) Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)• Max. sensitivity: -167 dBm• IPX6 protection class• Magnetic and non-slip housing base• LED display of GPS status• Operating temperature: -20°C ~ +60°C• Cold start in approx. 26 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: approx. 4.5 m• Dimensions: (LxWxH): approx. 65 x 45 x 22 mmSystem requirements• Windows Vista/7/8, Linux Kernel 2.6• PC or notebook with a free USB portPackage contents• USB 2.0 Receiver• CD driver• User manual on CD ROM Packaging• Box

GNSS Beidou Galileo Glonass GPS NL-8022MP u-blox 8 serial MD6 roof mounting marine 5.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8022MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.Technical data• Connection: MD6 Navilock connector (USB or serial connection cable available as an option)• u-blox 8 UBX-M8030-KT chipset• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1: 1602.5625/1615.5000 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO E1, 1575.4200 MHz QZSS L1, 1575.4200 MHz• Processes the signals from up to 72 satellites simultaneously• Supports AssistNow online/offline SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• Auto baud rate up to 115,200 bps• PPS signal at pin 6• Update rate: Single GNSS: 18 Hz (e.g. GPS solo) Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)• Max. sensitivity: -167 dBm• IPX7 protection class• LED display of GPS status• Operating temperature: -20°C ~ +60°C• Cold start in approx. 26 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: approx. 5 m• Dimensions (Ø x H without thread): approx. 62 mm x 21 mmSystem requirements• Windows Vista/7/8, Linux Kernel 2.6• MD6 connection cablePackage contents• MD6 serial receiver• Mounting hardware: stainless steel nut and washer• CD driver• User manual on CD ROM Packaging• Box

GNSS Beidou Galileo Glonass GPS NL-8222MP u-blox 8 serial MD6 roof mounting marine 10.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8222MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.Technical data• Connection: MD6 Navilock connector (USB or serial connection cable available as an option)• u-blox 8 UBX-M8030-KT chipset• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1: 1602.5625/1615.5000 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO E1, 1575.4200 MHz QZSS L1, 1575.4200 MHz• Processes the signals from up to 72 satellites simultaneously• Supports AssistNow online/offline SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• Auto baud rate up to 115,200 bps• PPS signal at pin 6• Update rate: Single GNSS: 18 Hz (e.g. GPS solo) Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)• Max. sensitivity: -167 dBm• IPX7 protection class• LED display of GPS status• Operating temperature: -20°C ~ +60°C• Cold start in approx. 26 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: approx. 10 m• Dimensions (Ø x H without thread): approx. 62 mm x 21 mmSystem requirements• Windows Vista/7/8, Linux Kernel 2.6• MD6 connection cablePackage contents• MD6 serial receiver• Mounting hardware: stainless steel nut and washer• CD driver• User manual on CD ROM Packaging• Box

GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V.Technical details Connector: WTB serial TTL, 6 pin, pitch 1.0 mmChipset u-blox 6 GPS SuperSense® Sensitivity -160 dBmAssistNow offline (14 days almanach)DGPS, WAAS, EGNOS and MSAS supportShort TTFF (Time To First Fix) also at low signal level Support NMEA 0183 protocolInternal patchantennaInternal TTL level converterPackage content GNSS modulePackage Poly bag

Serial Navilock GNSS receivers have an MD6 universal connector plug. The pin assignment of this plug is identical for the u-blox, Sony, GLONASS and SiRF chipsets. You will need this specific connection cable to connect the GNSS receiver to a serial port. It is connected to the power supply using the PS2 socket of the notebook, tablet PC etc. The PS2 connection is purely a power connection and does not carry any data channels. The data protocol is provided via the SUB-D9 plug.Technical dataTo connect to the D-Sub 9 serial portPowered by PS2MD6 Navilock GNSS 6-pin receiver socketCable length of 6-pin connection cable: 59 cm (includes connectors)PS/2 cable length: 39 cm (includes connectors)Package contents• Connection cable for GNSS receivers

Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into the device features of a notebook or tablet PC you need to install the enclosedProlific USB to serial driver. It will provide a virtual serial port on your device.Technical details For connection to USB portInternal serial to USB bridge (driver enclosed)MD6 Navilock GNSS receiver female jack 6 pinChipset: Prolific PL-2303 TAcable length 52 cm (connectors included)System requirements Windows XP/Vista/7/8/10For devices with OTG function and optional OTG adapter: Windows 10 Package content Connection cable for PDA GPS ReceiverPackage Zip poly bag

The waterproof M8 extension cable by Navilock serves the extended connection of the Navilock M8 GNSS receivers to various Navilock M8 adapter cables.Specification • Connectors: 1 x M8 male > 1 x M8 female• Cable gauge: 28 AWG• Waterproof• Cable colour: black• Length incl. connector (L): ca. 10 mSystem requirements • A Navilock serial M8 GNSS receiverPackage content • Extension Cable for M8 GNSS receiverPackage • Poly bag

The USB 2.0 GPS receiver with the u-blox 6 SuperSense® chipset has a built-in active antenna.It can be used for navigation in conjunction with a notebook and the corresponding navigation software.Technical data• u-blox 6 GPS SuperSense® high-performance chip• Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz• Processes the signals from up to 50 satellites simultaneously• Supports AGPS, WAAS, EGNOS and MSAS• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• USB specification 2.0• Auto baud rate up to 115,200• Update rate: up to 5 Hz• Max. sensitivity: –162 dBm• IPX6 protection class• Magnetic and non-slip housing base• LED display of GPS status• Operating temperature: -20°C to +60°C• Cold start in approx. 25 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Dimensions (LxWxH): 65 mm x 45 mm x 22 mm• Cable length: 1.50 mSystem requirements• Windows XP/Vista/7/8, Linux from Kernel 2.6• PC or notebook with a free USB portPackage contents• USB 2.0 Receiver• CD driver• User manual on CD ROM

GNSS GALILEO GPS antenna NL-203AA SMA connector 5 m High Gain Navilockexternal active additional antenna for GPS receiverinternal patch antenna: 40 x 40 x 4 mmFrequency range: 1575.42 MHz +/- 1.02 MHzVSWR: 2.0 typ.Antenna gain: 5 dBiPolarization: RHCP LNAAntenna gain: 30 dBInput voltage: 3.0 ~ 5.0 VVSWR: 1.5 typ.Noise Figure: 1.5 @ 25°C +/- 10 °CCable attenuation: 5.70 dBSMA connectorCable RG-174, 50 Ohm, 5 m longDimensions 50.6 x 50.6 x 15.6 mmMagnetic baseCurrent consumption: typ. 10 mA @ 5.0 VIPX-6

This GNSS antenna by Navilock can be used on an existing GNSS receiver, car radio or vehicle multimedia receiver with FAKRA C connection. The antenna is waterproof and can therefore be used temporarily outside the vehicle.Specification • Connector: 1 x FAKRA C Jack• FAKRA C: RAL 5005 Signal blue• Frequency range: 1575.42 MHz• GALILEO: E1 1,5754200 GHz, GPS: L1, 1.5754200 GHz• Band width: 2 MHz• Antenna gain: 27 dBi• Impedance: 50 Ohm• Mounting: Magnet base• Housing material: ABS• Colour: black• Protection class: IP67• Cable type: RG 174/U• Cable colour: black• Cable attenuation: 1.1 dB @ 1500 MHz per meter• Cable length incl. connector: ca. 3 m• Dimensions (LxWxH): 40.5 x 38.0 x 12.0 mm• DC input: 3.0 - 5.5 V• Power consumption: 11 mA @ 3.0 V typ. 15 mA @ 3.0 V max.• Weight: 150 gSystem requirements • Device with a free FAKRA C plugPackage content • AntennaPackage • Poly bag

The waterproof M8 extension cable by Navilock serves the extended connection of the Navilock M8 GNSS receivers to various Navilock M8 adapter cables.Specification • Connectors: 1 x M8 male > 1 x M8 female• Cable gauge: 28 AWG• Waterproof• Cable colour: black• Length incl. connectors (L): ca. 3 mSystem requirements • A Navilock serial M8 GNSS receiverPackage content • Extension Cable for M8 GNSS receiverPackage • Poly bag

The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. It is possible to use this Multi GNSS receiver with a laptop and suitable routing software for navigation.Technical details Connector: 1 x USB 2.0 Type-A maleChipset: u-blox 8 EVA-M8QFrequency: GPS: L1, 1575.4200 MHz GLONASS: L1, 1602 (k x 0.5625) MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz QZSS: L1, 1575.4200 MHzAccepts the signals of up to 72 satellites at the same timeSupports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTGAuto Baud Rate up to 115200 bpsUpdate rate: single GNSS: 18 Hz (e.g. GPS solo) multi GNSS: 10 Hz (e.g. GPS+GLONASS)Sensibility: max. -164 dBmProtection class: IPX6Magnetic, non-slip on the bottomLED-indicator for GPS statusOperating temperature: -10 °C ~ 50 °CPower supply: 5 V DCCurrent consumption: max. 45 mACold start in ca. 26 secondsHot start in ca. 1 secondPositioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBASCable length: ca. 1.5 mDimensions (LxWxH): ca. 65 x 45 x 22 mmSystem requirements Android 10.0 or aboveChrome OS 90.0 or aboveLinux Kernel 5.8 or aboveWindows 10/10-64/11Package content USB 2.0 receiver Package Box

The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-803P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.Technical details Connector: MD6 Navilock plug (USB or serial cable are optional available)Chipset: u-blox 8 EVA-M8QFrequency: GPS: L1, 1575.4200 MHz GLONASS: L1, 1602 (k x 0.5625) MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz QZSS: L1, 1575.4200 MHzAccepts the signals of up to 72 satellites at the same timeSupports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTGAuto Baud Rate up to 115200 bpsPPS signal on pin 6 (LVTTL 3.3 V)Update rate: single GNSS: 18 Hz (e.g. GPS solo) multi GNSS: 10 Hz (e.g. GPS+GLONASS)Sensibility: max. -164 dBmProtection class: IPX7Operating temperature: -10 °C ~ 50 °CPower supply: 5 V DCCurrent consumption: max. 45 mACold start in ca. 26 secondsHot start in ca. 1 secondPositioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBASCable length: ca. 5 mDimensions (Ø x H without screw thread): ca. 62 mm x 21 mmSystem requirements Android 10.0 or aboveChrome OS 90.0 or aboveLinux Kernel 5.8 or aboveWindows 10/10-64/11MD6 connection cablePackage content MD6 serial receiverMounting material: stainless steel nut and washerPackage Box

GNSS Beidou Galileo Glonass GPS NL-8002U u-blox 8 USB 1.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.Technical data• Connection: USB 2.0 type A plug• u-blox 8 UBX-M8030-KT chipset• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1: 1602.5625/1615.5000 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO E1, 1575.4200 MHz QZSS L1, 1575.4200 MHz• Processes the signals from up to 72 satellites simultaneously• Supports AssistNow online/offline SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• USB specification 2.0• Auto baud rate up to 115,200 bps• Update rate: Single GNSS: 18 Hz (e.g. GPS solo) Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)• Max. sensitivity: -167 dBm• IPX6 protection class• Magnetic and non-slip housing base• LED display of GPS status• Operating temperature: -20°C ~ +60°C• Cold start in approx. 26 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: approx. 1.5 m• Dimensions: (LxWxH): approx. 65 x 45 x 22 mmSystem requirements• Windows Vista/7/8, Linux Kernel 2.6• PC or notebook with a free USB portPackage contents• USB 2.0 Receiver• CD driver• User manual on CD ROM Packaging• Retail box

The MD6 serial GPS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.Technical details Connector: MD6 Navilock plug (USB or serial cable are optional available)Chipset: u-blox 6 UBX-G6000-BTFrequency: GPS: L1, 1575.4200 MHzAccepts the signals of up to 50 satellites at the same timeSupports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTGBaud rate: 9600 (up to 115200)Update rate: up to 5 HzSensibility max. -162 dBmIPX6 protection classMagnetic, non-slip on the bottomLED-indicator for GPS statusOperating temperature: -20 °C ~ 60 °CPower supply: 5 V DCCurrent consumption: max. 80 mACold start in ca. 25 secondsHot start in ca. 1 secondPositioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBASCable length: ca. 1.5 mDimensions (LxWxH): ca. 65 x 45 x 22 mmSystem requirements Windows 98SE/ME/2000/XP/Vista/7/8.1/10, Windows Mobile 2003/5/6, Mac OSX , Linux Kernel 2.6MD6 connection cablePackage content MD6 serial receiverNavilock support CD incl. driver and user manualPackage Retail Box

GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 1.50 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.Technical data• Connection: MD6 Navilock connector (USB or serial connection cable available as an option)• u-blox 8 UBX-M8030-KT chipset• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1: 1602.5625/1615.5000 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO E1, 1575.4200 MHz QZSS L1, 1575.4200 MHz• Processes the signals from up to 72 satellites simultaneously• Supports AssistNow online/offline SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• Auto baud rate up to 115,200 bps• PPS signal at pin 6• Update rate: Single GNSS: 18 Hz (e.g. GPS solo) Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)• Max. sensitivity: -167 dBm• IPX6 protection class• Magnetic and non-slip housing base• LED display of GPS status• Operating temperature: -20°C ~ +60°C• Cold start in approx. 26 seconds• Hot start in approx. 1 second• Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: approx. 1.5 m• Dimensions: (LxWxH): approx. 65 x 45 x 22 mmSystem requirements• Windows Vista/7/8, Linux Kernel 2.6• MD6 connection cablePackage contents• MD6 serial receiver• CD driver• User manual on CD ROM Packaging• Box

This Nylon nut by Navilock is used to mount a GNSS receiver e.g. on a vehicle roof.Technical details Inner thread: 15.8750 mm (5/8'' - 11 UNC)Spanner width SW: 23.8125 mm (15/16'')Height: 9.5250 mm (3/8'')Material: NylonSystem requirements Navilock GNSS roofmount receiverPackage content 10 x Nylon nutPackage Zip poly bag