189 products were found matching your search for noctuas in 1 shops:

The NA-HC4 chromax.white cooler cover set is an accessory for Noctua's award-winning NH-D15, NH-D15S and NH-D15 SE-AM4 CPU coolers. The covers, made of high-quality black powder-coated aluminium, give the cooler an elegant snow-white look that perfectly matches systems designed entirely in white or in black and white. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-D15(S), without even having to remove the cooler from the CPU.Caution:The covers increase the overall height of the cooler by 5 mm (from 160 to 165 mm) and the width by 3 mm (from 150 to 153 mm). Please make sure that your case has sufficient space and that the covers do not come into contact with other components such as PCIe cards.

The cooler cover NA-HC2 chromax.white is an accessory for Noctua's award-winning CPU coolers NH-U12S, NH-12S TR4-SP3, NH-U12S SE-AM4 and NH-U12S DX-3647. The high-quality, white powder-coated aluminium cover gives the cooler an elegant snow-white look that perfectly matches systems designed entirely in white or black and white. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U12S, without even having to remove the cooler from the CPU.Caution:The cover increases the overall height of the cooler by 6 mm (from 158 to 164 mm) and the width by 3 mm (from 125 to 128 mm). Please make sure that your case has sufficient space and that the cover does not come into contact with other components such as PCIe cards.

The NF-A15 has received more than 100 awards and recommendations from international hardware websites and magazines and is one of Noctua's most renowned and popular 140-mm fan models. With its 150mm-wide round frame and the mounting holes of the 120-mm standard (105-mm hole spacing), it is ideal for use on CPU coolers such as the popular NH-D15, NH-D15S or NH-U14S models. In the chromax.black.swap edition, the unique silent cooling capacity of the NF-A15 is combined with an attractive, completely black design and replaceable anti-vibration pads in red, white, blue, green, yellow and black - so the fan can be individually colour-coded and adapted to specific colour schemes. With Noctua's proven SSO2 premium bearing and more than 150,000 hours MTTF, the NF-A15 PWM chromax.black.swap is the perfect choice for users who place as much emphasis on individual, focused aesthetics as on first-class quality and performance.

The cooler cover set NA-HC3 chromax.black.swap is an accessory for Noctua's award-winning CPU coolers NH-D15, NH-D15S and NH-D15 SE-AM4. The cooler can be individually colour-coded and adapted to popular colour schemes such as black, black/white or black/red by means of the covers made of high-quality black powder-coated aluminium and the replaceable inserts in black, white, red, blue, green and yellow. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-D15(S), without even having to remove the cooler from the CPU. Caution:The covers increase the overall height of the cooler by 5 mm (from 160 to 165 mm) and the width by 3 mm (from 150 to 153 mm). Please make sure that your case has sufficient space and that the covers do not come into contact with other components such as PCIe cards.

The NA-HC4 chromax.black cooler cover set is an accessory for Noctua's award-winning NH-D15, NH-D15S and NH-D15 SE-AM4 CPU coolers. The covers, made of high-quality black powder-coated aluminium, give the cooler a sleek stealth look that perfectly matches completely black systems as well as many other popular colour schemes. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-D15(S), without even having to remove the cooler from the CPU.Caution:The covers increase the overall height of the cooler by 5 mm (from 160 to 165 mm) and the width by 3 mm (from 150 to 153 mm). Please make sure that your case has sufficient space and that the covers do not come into contact with other components such as PCIe cards.

The NA-HC7 chromax.black.swap radiator cap kit is an accessory for Noctua's award winning NH-U12A CPU coolers. The radiator can be customised using covers made of high-quality, black powder-coated aluminium and interchangeable inserts in black, white, red, blue, green and yellow.Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U12A, without even having to remove the cooler from the CPU. Together with the chromax.black.swap edition of the NF-A12x25 fan, the NA-HC7 covers open up endless ways of designing your own very special, unique NH-U12A, which looks just as great as it cools!Caution:The covers increase the overall height of the cooler by 3mm (from 158 to 161mm) and the width by 3 mm (from 125 to 128mm). Please make sure that your case has sufficient space and that the covers do not come into contact with other components such as PCIe cards.

The cooler cover NA-HC5 chromax.black.swap is an accessory for Noctua's award-winning CPU coolers NH-U14S, NH-U14S TR4-SP3 and NH-U14S DX-3647. The cover made of high-quality black powder-coated aluminium and the replaceable inserts in black, white, red, blue, green and yellow allow the cooler to be individually colour-coded and adapted to popular colour schemes such as black, black/white or black/red. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U14S, without even having to remove the cooler from the CPU.Caution:The cover increases the overall height of the cooler by 7 mm (from 165 to 172 mm) and the width by 3 mm (from 150 to 153 mm). Please make sure that your case has sufficient space and that the cover does not come into contact with other components such as PCIe cards.

The cooler cover NA-HC1 chromax.black.swap is an accessory for Noctua's award-winning CPU coolers NH-U12S, NH-U12S TR4-SP3, NH-U12S SE-AM4 and NH-U12S DX-3647. The cover, made of high-quality black powder-coated aluminium and the replaceable inserts in black, white, red, blue, green and yellow, allow the cooler to be individually colour-coded and adapted to popular colour schemes such as black, black/white or black/red. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U12S, without even having to remove the cooler from the CPU.Caution:The cover increases the overall height of the cooler by 6 mm (from 158 to 164 mm) and the width by 3 mm (from 125 to 128 mm). Please make sure that your case has sufficient space and that the cover does not come into contact with other components such as PCIe cards.

The cooler cover NA-HC6 chromax.white is an accessory for Noctua's award-winning CPU coolers NH-U14S, NH-U14S TR4-SP3 and NH-U14S DX-3647. The high-quality, white powder-coated aluminium cover gives the cooler an elegant snow-white look that fits perfectly with systems designed all in white or in black and white. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U14S, without even having to remove the cooler from the CPU. Caution:The cover increases the overall height of the cooler by 7 mm (from 165 to 172 mm) and the width by 3 mm (from 150 to 153 mm). Please make sure that your case has sufficient space and that the cover does not come into contact with other components such as PCIe cards.

The NA-HC8 chromax.white cooler cover is an accessory for Noctua's award-winning NH-U12A CPU coolers. The cover, made of high-quality, white powder-coated aluminium, gives the radiator an elegant, snow white look that goes perfectly with systems designed entirely in white or black and white. Thanks to the foolproof assembly, it takes only a few minutes to change the appearance of an NH-U12A, without even having to remove the cooler from the CPU. Together with the chromax.black.swap edition of the NF-A12x25 fan, the NA-HC8 chromax.white cover offers you the chance to transform your NH-U12A into a black and white power package.Caution:The cover increases the overall height of the cooler by 3mm (from 158 to 161mm) and the width by 3 mm (from 125 to 128mm). Please make sure that your case has sufficient space and that the cover does not come into contact with other components such as PCIe cards.

The NA-FD1 fan duct kit for Noctua NH-L9i and NH-L9a series coolers enables significant performance improvements in small form factor (SFF) environments where there is a gap of 5 mm or more (up to 45 mm) between the cooler and a perforated top or side panel. The duct bridges this gap, preventing the cooler from taking in hot air from the interior and enables it to draw in fresh air from the outside, which can improve CPU temperatures by up to 5°C or even more depending on the setup. As the fan duct is assembled from EVA foam spacers of different thicknesses, it is fully modular and can be adjusted in 1-mm increments from 5 mm to 45 mm in order to fit various different housing and configurations. In short, the NA-FD1 air duct is a strikingly simple, highly flexible and cost-effective solution to massively improve the performance of the NH-L9a and NH-L9i series coolers!

The NH-L9a-AM5 chromax.black is an all-black version of Noctua's award-winning low-profile cooler NH-L9a-AM5, designed for HTPCs and small form factor (SFF) systems. The recipe for success remains unchanged thanks to the same super-flat heat sink and the proven NF-A9x14 PWM premium fan: strong cooling performance and excellent smoothness with a height of just 37 mm, coupled with 100% RAM and PCIe compatibility. The chromax.black version with its black fan and black-coated heat sink also combines these advantages with a cool stealth design.Caution:The NH-L9a-AM5 is a quiet, extremely compact low-profile cooler designed for use in small cases and HTPC environments. The cooler has excellent cooling performance in its class, but is not suitable for overclocking or CPUs with high heat emissions. Please refer to our CPU compatibility list to check if the NH-L9a-AM5 is suitable for your CPU.

The NA-SAVG2 chromax.black is a set of three black NA-AVG2 anti-vibration gaskets for using compatible Noctua 140x25-mm fans on water-cooling radiators and other applications that benefit from a tighter seal. Thanks to the extra-soft yet tear-resistant silicone rubber, the NA-AVG2 not only contributes to the reduction of air leakage between the fan and radiator, but also dampens any vibrations. This makes them an ideal accessory for performance enthusiasts who want to squeeze out those extra few percent of cooling efficiency!

The NF-A4x10 24V PWM is a special 24-V version of Noctua's 40x10 mm highly optimised fan, which is controlled via PWM. This makes it ideal for 24 V-based 3D printers as well as various other 24 V applications. With its AAO (Advanced Acoustic Optimisation) frame system and advanced aerodynamic design measures such as flow acceleration channels, the NF-A4x10 achieves superior performance with minimal operating noise. The Smooth Commutation Drive technology and the SSO2 industry benchmark bearing guarantee excellent smoothness and superb long-term stability. Rounded off with the OmniJoin adaptor set, the NA-AC9 adapter cable for standard 3D printers (such as Creality Ender 3 & CR-10, Anycubic Mega) and the low-noise adapter, the NF-A4x10 24V PWM is a high-quality, premium solution for demanding 24-V applications with or without PWM control.Please note! As a 24-V fan, the NF-A4x10 24V cannot be operated at 12 V and requires a minimum starting voltage of 17 V. This version is therefore incompatible with conventional PC applications.

The NH-D15 G2 represents the second and improved generation of the iconic Noctua NH-D15. Thanks to 2x state-of-the-art NF-A14x25r G2 PWM fans with speed offset, 8x heatpipes and asymmetric cooling towers that have been carefully optimised for use with the new fans, it achieves even higher cooling performance compared to its award-winning predecessor, while maintaining excellent running smoothness. Special High-Base Convexity (HBC) versionThe High-Base-Convexity (HBC) version achieves optimum contact quality on CPUs that become highly concave when the socket is closed due to the pressure of the Independent Loading Mechanism (ILM). This makes it ideal for Intel LGA1700 processors when washers or contact frames are not used to reduce ILM pressure or when the CPU has been permanently deformed during long-term use.

The NH-D15 G2 represents the second and improved generation of the iconic Noctua NH-D15. Thanks to 2x state-of-the-art NF-A14x25r G2 PWM fans with speed offset, 8x heatpipes and asymmetric cooling towers that have been carefully optimised for use with the new fans, it achieves even higher cooling performance compared to its award-winning predecessor, while maintaining excellent running smoothness. Special Low-Base-Convexity (LBC) versionThe Low-Base-Convexity (LBC) version achieves optimum contact quality on relatively flat CPUs. This makes it ideal for AM5, even if offset mounting is not used or if users want to combine CCD temperatures as low as possible with as IOP temperatures as low as possible. The LBC version is also recommended for AM4, LGA2066 and LGA2011 (free NM-i20xx mounting kit required), direct die applications and CPUs that have been flat ground or modified with customer-installed flat heatspreaders.

For many years, Noctua's DX-series CPU coolers have been the first choice when it comes to quiet premium cooling solutions for Intel Xeon processors. The NH-U9 DX-4677 features a larger, specially adapted contact surface for LGA4677. With its 92-mm heat sink based on the proven NH-U9 and 2x award-winning NF-A9 92-mm fans (high-performance version with 2500 rpm), which can be controlled via PWM, it combines powerful cooling performance and outstanding compatibility - perfect for 4HE systems and other applications with limited space. WarningPlease note that the NH-U9S DX-4677 is a dedicated version for the Intel LGA4677 socket. Owing to the larger contact surface, the cooler cannot be used on smaller sockets. Please also note that a plastic processor support frame is required to mount LGA4677 processors and coolers.

The NH-L9x65 chromax.black is an all-black version of the award-winning NH-L9x65 low-profile cooler that bridges the gap between the larger NH-L12 series and the ultra-compact NH-L9i and NH-L9a. Boasting a height of 65 mm instead of 37 mm and 4x instead of 2x heatpipes, the NH-L9x65 is more powerful than its smaller siblings, but retains the 95x95 mm footprint of the NH-L9i. This not only guarantees 100% RAM and PCIe compatibility on current motherboards, but also makes the cooler more convenient to use, because it does not extend beyond the socket connections. Caution:The NH-L9x65 is an extremely compact and quiet low-profile cooler designed for use in small form factor packages and mini-ITX environments. Although it offers best-in-class performance for its size, it is not suitable for overclocking and/or for CPUs with high thermal loads. Please refer to our CPU compatibility list to see if the NH-L9x65 is suitable for your CPU.

The NA-SAVG1 chromax.black is a set of three black NA-AVG1 anti-vibration gaskets for using compatible Noctua 120x25-mm fans on water-cooling radiators and other applications that benefit from a tighter seal. Thanks to the extra-soft yet tear-resistant silicone rubber, the NA-AVG1 not only contributes to the reduction of air leakage between the fan and radiator, but also dampens any vibrations. This makes them an ideal accessory for performance enthusiasts who want to squeeze out those extra few percent of cooling efficiency!

The NH-D9 DX-4677 4U has a larger, specially adapted contact surface for LGA4677. With its 92-mm heat sink based on the proven NH-D9L and 2x award-winning NF-A9 92-mm fans (high-performance version with 2500 rpm), which can be controlled via PWM, it combines powerful cooling performance and outstanding compatibility - perfect for 4HE systems and other applications with limited space. The airflow of the NH-D9 is parallel to the longitudinal axis of the LGA4677 socket, making the cooler ideal for systems where the blow-out housing fans are located in this direction. Caution:Please note that the NH-D9 DX-4677 4U is a dedicated version for the Intel LGA4677 socket. Owing to the larger contact surface, the cooler cannot be used on smaller sockets.Please also note that a processor support frame is required to mount LGA4677 processors and coolers. These support frames are supplied with Intel Boxed CPUs and are available for tray CPUs through Intel sales partners.