985 products were found matching your search for source in 4 shops:

The LED lamp for the smart home!Sale in household quantities only!This offer is not valid for resellers!Perfect light for every situationWith its wide color spectrum and excellent luminosity, the new LED lamp provides lighting for any situation. Users simply select their color as desired from the wide color spectrum or opt for plain white in various degrees of warmth. At the same time, the brightness can be infinitely dimmed thanks to smart light control and thus adapted to every need.Convenient light control with FRITZ!DECT 500FRITZ!DECT 500 can be controlled in many ways: via the two Smart Home buttons FRITZ!DECT 440 and 400, via a FRITZ!Fon or via FRITZ!OS (from version 7.20). Control is particularly convenient via the free FRITZ!App Smart Home. Whether at home or on the go - the app offers:• Perfect lighting ambience with a complete color spectrum. • Select any light color of the color spectrum.The light color is selected intuitively by pointing a finger at the stepless color selector in the FRITZ!App Smart Home. With the help of a slider, the brightness can also be continuously adjusted and thus any desired lighting ambience can be implemented. AVM FRITZ!DECT 500 at a glance:• LED lamp for white and colored light• Complete color spectrum for individual lighting• Perfect light for every situation• Brightness infinitely variable• Color change and dimming via FRITZ!App, FRITZ!Fon, PC, notebook or tablet• Switch on and off automatically or manually• Automatic updates with new functions• Radio standard DECT ULESystem requirementsFunctions of the smart lamp can be used via DECT ULE radio with any FRITZ!Box with DECT base and FRITZ!OS as of 7.20 FRITZ!OS as of 7.20 available for e.g. FRITZ!Box 7590 and 7530, current information at avm.de/lichtanSale only in household quantities!This offer is not valid for resellers!

Current referenceEnclosure SO-8

One chip integrated constant current sourceOutput current setting by use of an external resistorReduces component count and board space

The REF200 combines three circuit building-blocks on a single monolithic chip: two 100-µA current sources and a current mirror. The sections are dielectrically isolated, making them completely independent. Also, because the current sources are two-terminal devices, they can be used equally well as current sinks. The performance of each section is individually measured and laser-trimmed to achieve high accuracy at low cost.

3-terminal, adjustable current referenceEnclosure: TO-92

8-channel source driverHousing: DIL-18

The VFF is perfect for checking continuity, for testing and locating breaks, for locating crimped fibres in control cabinets or anywhere fibre optic cable is to be installed and tested. The break in the fibre optic is indicated by a solid or flashing signal using a red laser.Features:• Visual monitoring of the cabling• The break in the fibre optic is indicated using a red laser• Detection of faulty splice joints in connection slots• Fast location of faulty components and connectors• Continuous and modulated light signal modes• Multi-mode and single mode fibres up to 5 km in length• Anti-roll design: does not slip on inclined surfaces• Rugged metal housing protected by non-slip Santoprene® casing Technical data:Light source: laser diode, class IICentral wavelength: 650 Nm ± 10 NmSpectral width: Power supply: two 1.5V AA alkaline batteries)Connection: 2.5 mm universal connectorLength: 220 mm with protective capDiameter: 32 mmWeight: Approx. 180 gIncluded:VFF visual fault-finder , nylon case, strap, belt clip, manual, batteries

FUSB3307 is a highly integrated USB Power Delivery (PD) power source controller that can control a DC-DC port current regulator or the optocoupler on the secondary side of an AC-DC adapter. It implements the source finite state machines of USB Power Delivery 3.0 (PD3.0) and Type-C™, which include programmable power supplies (PPS). To meet the PPS specification, FUSB3307 supports output voltage control of a minimum of 3.3 V and a maximum of 21 V. The device includes constant voltage (CV) and constant current limit (CL) control blocks. The references are supported by internal D/A converters. The FUSB3307 supports several protection functions: Undervoltage Protection (UVP), Overvoltage Protection (OVP), Overcurrent Protection (OCP), CC1 and CC2 Overvoltage Protection (CC_OVP), VCONN Overcurrent Protection (VCONN_OCP), and Internal and External Overtemperature Protection (I_TOP and E_OTP). A 10-bit A/D converter can be used to monitor output voltage, output current, IC internal temperature, and external temperature via an NTC resistor.The FUSB3307 is capable of driving single or series connected n-channel MOSFETs as load switches, resulting in a lower cost and simpler design.Features• Compliant with PD 3.0 v1.2 and Type-C r1.4• Constant voltage (CV) and constant current limit (CL) regulation• Small current sense resistor (5 m) for high efficiency• Gate driver for n-channel MOSFET as load switch• CC1/CC2 pin protection up to 26 V• Built-in cable drop compensation• Selectable modes resistor divider or battery charge (BC1.2) • Built-in output capacitor bleeding function for fast discharge• Adaptive UVP, adaptive OVP, OTP and VBUS error detection

This circuit enables the operation of LEDs with an input voltage of 4 - 30 V DC without an additional series resistor.The LED can therefore run on variable voltage with largely constant brightness. Several LEDs can be connected in series.• Operating voltage: 4 - 30 V DC• Constant current: approx. 10 mA• Dimensions: 10 x 7 mm

The advanced ATEM 1 M/E Production Studio 4K model switches between SD, HD or Ultra HD video standards so you can connect a wide range of video sources such as cameras, disk recorders and computers. Featuring 10 inputs, chroma keys, transitions, media pool, 4 upstream keyers, downstream keyers, audio mixer, multi view, full motion DVE, stinger transitions, large media pool with full motion clips and 3 auxiliary outputs.

The advanced ATEM 1 M/E Production Studio 4K model switches between SD, HD or Ultra HD video standards so you can connect a wide range of video sources such as cameras, disk recorders and computers. Featuring 10 inputs, chroma keys, transitions, media pool, 4 upstream keyers, downstream keyers, audio mixer, multi view, full motion DVE, stinger transitions, large media pool with full motion clips and 3 auxiliary outputs.

The advanced ATEM 1 M/E Production Studio 4K model switches between SD, HD or Ultra HD video standards so you can connect a wide range of video sources such as cameras, disk recorders and computers. Featuring 10 inputs, chroma keys, transitions, media pool, 4 upstream keyers, downstream keyers, audio mixer, multi view, full motion DVE, stinger transitions, large media pool with full motion clips and 3 auxiliary outputs.

The advanced ATEM 1 M/E Production Studio 4K model switches between SD, HD or Ultra HD video standards so you can connect a wide range of video sources such as cameras, disk recorders and computers. Featuring 10 inputs, chroma keys, transitions, media pool, 4 upstream keyers, downstream keyers, audio mixer, multi view, full motion DVE, stinger transitions, large media pool with full motion clips and 3 auxiliary outputs.

The advanced ATEM 1 M/E Production Studio 4K model switches between SD, HD or Ultra HD video standards so you can connect a wide range of video sources such as cameras, disk recorders and computers. Featuring 10 inputs, chroma keys, transitions, media pool, 4 upstream keyers, downstream keyers, audio mixer, multi view, full motion DVE, stinger transitions, large media pool with full motion clips and 3 auxiliary outputs.

The GoPro Dual Battery Charger is a USB charger that holds two batteries, and will charge them simultaneously. It is designed to draw USB bus power from most USB power sources, including USB wall adapters, computers, the GoPro Auto Charger, and the GoPro Wall Charger. Dual LED lights indicate the charge status of each battery.

The GoPro Dual Battery Charger is a USB charger that holds two batteries, and will charge them simultaneously. It is designed to draw USB bus power from most USB power sources, including USB wall adapters, computers, the GoPro Auto Charger, and the GoPro Wall Charger. Dual LED lights indicate the charge status of each battery.

The GoPro Dual Battery Charger is a USB charger that holds two batteries, and will charge them simultaneously. It is designed to draw USB bus power from most USB power sources, including USB wall adapters, computers, the GoPro Auto Charger, and the GoPro Wall Charger. Dual LED lights indicate the charge status of each battery.

The SL3 is a source of inspiration and a trusted companion, elevating the art of visual storytelling to a whole new level. Ideal for those who aim to not only enhance their photography and videography skills, but also for those committing to excellence, and fully immerse themselves in the joy of the creative process with a Leica.

This MA-400 Microphone Adapter from Canon is compatible with the Cinema EOS C300 Mark II and XC15 4K camcorders. By attaching the microphone adapter to your camcorder, you can use the adapter's input terminals to record audio independently to two audio channels from an external microphone or analog audio input source with an XLR connector. The microphone adapter supports 48V phantom power, which is powered by the camcorder's power supply.

The aperture ranges from T3.8 to T22. T3.8 being its fastest aperture, this lens is best used in environments with sufficient light or with a light source incorporated. The aperture is manually adjustable without click stops with a continuous, smooth aperture ring. Both the aperture ring and focus ring feature a 0.8 gear pitch in case you want to use a follow focus with either. The focus ring is also well-damped and very smooth. The lens doesn't offer auto-focus, but in fish-eye lenses objects appear mostly in focus anyway.