16741 products were found matching your search for current in 2 shops:

Fluke's usual robustness. Fluke's usual reliability. Fluke's usual accuracy.True RMS and optimised ergonomic design make the current clamp meters in the 320 series the most important measuring instruments for installation and troubleshooting in industrial and building applications. The current clamp meters Fluke 323, 324 and 325 are used to check circuits, switches, fuses and contacts for the presence of load current, AC voltage or continuity. These compact and robust current clamp meters are ideal for currents up to 400 A in restricted control cabinets. The Fluke 325 current clamp meter also allows DC and frequency measurement. • AC current measurement up to 400 A• AC and DC voltage measurement up to 600 V• True RMS values of AC voltages and currents for accurate measurements with non-linear signals• Resistance measurements of up to 40 kohm thanks to continual detection function• Temperature and capacitance measurement.• Frequency measurement• Sleek, ergonomic design• Safety specification in accordance with CAT IV 300 V and CAT III 600 V• Hold Button• Soft carrying caseTechnical data:• AC power: 40.00 A/400.0 A2% ±5 digits (45 Hz to 65 Hz)2.5% ±5 digits (65 Hz to 400 Hz)• DC power: 40.00 A to 400.0 A, ±2% + 5 digits• AC voltage: 600.0 V, 1.5% ±5 digits• DC voltage: 600.0 V, 1.0% ±5 digits• Resistance measurement: 400.0 ohm/4000 ohm/40.00 K ohm, 1.0% ±5 digits• Continuity test: = 30 ohm• Capacitance measurement: 100.0 µF to 1000 µF• Frequency measurement: 5.0 Hz to 500.0 Hz• Measurement (AC): True RMS measurement• Backlight• Hold function• Contact measurement of temperature: -10.0°C to 400.0°C (-114.0 bis 752.0°F)• Min. /Max.• Max. cable diameter: 30 mm• H x W x D (mm): 207 x 75 x 34• Weight: 283 g• Measurement category EN 61010-1: CAT III 600 V, CAT IV 300 V

Warranty: 2 years application: Multi-function Current [A]: 20 Voltage [V]: 12 Number of contacts: 5 Relay function: Work contact Temperature range from [°C]: -40 Temperature range to [°C]: 100 Resistance [Ohm]: 16

Fluke's usual robustness. Fluke's usual reliability. Fluke's usual accuracy.True RMS and optimised ergonomic design make the current clamp meters in the 320 series the most important measuring instruments for installation and troubleshooting in industrial and building applications. The Fluke 323 is ideal for measuring currents up to 400 A in restricted control cabinets.• AC current measurement up to 400 A• AC and DC voltage measurement up to 600 V• True RMS values of AC voltages and currents for accurate measurements with non-linear signals• Resistance measurements of up to 40 kohm thanks to continual detection function• Sleek, ergonomic design• Safety specification in accordance with CAT IV 300 V and CAT III 600 V• Hold Button• Soft carrying caseTechnical data:• Alternating current: 400.0 A2% ±5 digits (45 Hz to 65 Hz)2.5% ±5 digits (65 Hz to 400 Hz)• AC voltage: 600.0 V, 1.5% ±5 digits• DC voltage: 600.0 V, 1.0% ±5 digits• Resistance measurement: 400.0 ohm/4000 ohm, 1.0% ±5 digits• Continuity test: = 70 ohm• Measurement (AC): True RMS measurement• Hold function• Max. cable diameter: 30 mm• H x W x D (mm): 207 x 75 x 34• Weight: 265 g• Measurement category EN 61010-1: CAT III 600 V, CAT IV 300 V

Digital current clamp meter, AC with automatic measuring range selection, TRMS, low impedance (LoZ), automatic switch-offCurrent clamp meter with automatic measuring range selection for RMS values (TRMS) for greater accuracyMeasuring leads for AC/DC voltage, resistance, continuity, frequency, capacitance and diode testingThermocouple for temperature measurementsLow impedance LoZ mode to detect and eliminate stray voltagesProtection rating CAT IV 600 V, CAT III 1000 V, class 2, dual insulationFall protection designed for up to 2 m (6.6 ft)Low battery indicator and easy-to-access battery compartmentOperating temperature: 0°C to 40°C (32°F to 104°F)Operating height up to 2000 m (6562 ft)Includes case, measuring lead, thermocouple with adapter and batteriesThe meter meets the requirements for use in simple and controlled electromagnetic environments, such as residential, office and small business environmentsTechnical data:Display: LCD with 6000 counts (3.5 cm)Voltage: 1000 V AC, 1000 V DCFrequency: 1 Hz - 500 KHzCurrent rating: 600 A AC, 600 A DCCapacity: 6000 µFTemperature range: -26 - 538°CStandard: CAT IV 600 V

Current Transformer 50AAccuracy: 1%Ferrite coreElectrical Strength: 3000VAC 1mA60s11 mm Internal diameter20 ohms Load Resistance50 A Rated Primary Current16.67 mA Rated Secondary CurrentCompatible withShelly EM

Current Transformer 120AAccuracy: 1%Ferrite coreElectrical Strength: 3000VAC 1mA60s17 mm Internal diameter20 ohms Load Resistance120 A Rated Primary Current40 mA Rated Secondary CurrentCompatible withShelly EM

PAN 124 - digital current clamp meter 400 A ACDigital display 11 mmAutomatic shut-offDiode testBacklightData holdContactless voltage tester (NCV)1-pin phase testerResolution: 1 mAIncluded in delivery: bag, test lead, operating instructionsTechnical dataMeasurement category (CAT) CAT III 600 VWeight (gross/net) 505/230 gAC voltage (V ~) 1 mV - 600 VDC voltage (V =) 0.1 mV - 600 VAC (A ~) 1 mA - 400 AResistance (O) 0.1 O - 20 MOAcoustic continuity tester - Jaw size (mm) 30 mmAccuracy (%) 0.8% - 3%Dimensions of device: 202 x 76 x 44 mmRequired battery(s): 1x 9 V 6LR61

The MH60 current clamp is designed for easy and convenient use with oscilloscopes: simply enclose the conductor and measure the current. Current measurements up to 100 A with high bandwidth are possible.The MH60 is compact and its enclosure diameter is 26 mm. It is suitable for many applications: Power electronics, automotive engineering, production of electrical articles, etc. The MH60 can be powered from the oscilloscope via a mains adapter or via the permanently molded µUSB connection cable. The built-in NiMH accumulator enables mains-independent operation for approx. 8 hours.Technical features:Current: from 10 mA to 100 A AC+DC (140 A peak)Output signal: 10 mV/Abandwidth: 1 MHzswitchable filters: 30 kHz, 3 kHz

Inrush current limiter SCL 3680Your powerful angle grinder, a strong compressor or a powerful pump trigger the fuse when switched on? Here is the solution!We are talking about the inrush current, i.e. the electrical current that flows immediately after a powerful device is switched on. It is often many times higher than the rated current and loads the mains and connected consumers equally. This can lead to undesirable effects such as the tripping of fuses and circuit breakers or even the overloading of the entire system. The SCL 3680 inrush current limiter provides a remedy here and briefly reduces the high inrush currents to prevent the fuse from blowing.FunctionThe SCL 3680 inrush current limiter prevents the fuse from tripping unintentionally when powerful loads are switched on. The intermediate plug reduces the load peaks typical of high-consumption devices when they are switched on.FeaturesThe inrush current limiter is suitable for circuits with a fuse rating of 16 A.Technical dataOperating voltage: 230 V ~, 50 HzPower consumption (stand-by): approx. 0.6 WRated current: max. 16 A Rated power: max. 3680 WSuitable for circuits with 16 A fuse protectionAmbient temperature: -10 °C to 50 °CDimensions: 98 x 59 x 41 mm without plug Protection class: IP20Package contents:Inrush current limiter SCL 3680Operating instructions German / English

Read the current with an ammeter clampReady to use solutionSelf poweredTransmission on events (Alert) or periodic (Counting)Compatible with KARE© services

LoRa Adeunis LoRaWAN Current Sensor Current Clamp 100AReady to use solutionSelf-supplyPeriodic emission of the measurement or event on parametric thresholds (Alert)Operating temperature: -25°C / +60°CFire resistance: UL94-V0Available in 100 AAccuracy +/- 2%- approx. 70 cm cable50 A version: 10 mm cablereplaceable battery- dimensions: 105 x 50 x 27 mmHousing: IP67Instructions for generating the App Key can be found under data sheets.

CT101-868M compact 1-channel current sensor with 100-A current transformer, self-poweredReporting of the RMS power and cumulative power consumptionHigh degree of measurement accuracy with a sampling rate of up to 3.3 kHzSelf-powered, without batteries or external cablesSampling rate of up to 1 s for real-time monitoringCompact size for installation in confined areasClip design for easy installationLED display to show the operating status and to indicate alarmsCompatibility with LoRaWAN gateways and network serversCompatibility with Milesight IoT CloudThe Milesight CT101 is an advanced LoRaWAN Smart Current Transformer designed for remote monitoring and analysis of power consumption. Thanks to its compact design and clip design, the CT101 is easy and safe to install without interrupting the power supply. Compatible with popular LoRaWAN gateways and IoT Cloud solutions, it is ideal for energy monitoring in smart buildings, machine failure detection and many more applications.SensorDetection parameters: RMS currentSampling frequency: 3.3 kHzOperating frequency: 50 ~ 60 HzMaximum input current: 100 A (CT101)Minimum input current: 1 A (CT101)Accuracy: ±1%Resolution: 1 mA

CT103-868M compact 1-channel current sensor with 300-A current transformer, self-poweredReporting of the RMS power and cumulative power consumptionHigh degree of measurement accuracy with a sampling rate of up to 3.3 kHzSelf-powered, without batteries or external cablesSampling rate of up to 1 s for real-time monitoringCompact size for installation in confined areasClip design for easy installationLED display to show the operating status and to indicate alarmsCompatibility with LoRaWAN gateways and network serversCompatibility with Milesight IoT CloudThe Milesight CT103 is an advanced LoRaWAN Smart Current Transformer designed for remote monitoring and analysis of power consumption. Thanks to its compact form and clip design, the CT103 is easy and safe to install without interrupting the power supply. Compatible with popular LoRaWAN gateways and IoT Cloud solutions, it is ideal for energy monitoring in smart buildings, machine failure detection and many more applications.SensorDetection parameters: RMS currentSampling frequency: 3.3 kHzOperating frequency: 50 ~ 60 HzMaximum input current: 300 A (CT103)Minimum input current: 2 A (CT103)Accuracy: ±1%Resolution: 1 mA

The testo 770-1 current clamp meter is ideal for non-contact current measurement on tightly packed power cables or conductors with a small diameter. The unique gripping mechanism allows you to grip each individual cable easily and securely.Large two-line displayAuto AC/DCFully retractable clamp arm for maximum flexibilityUsing this current clamp meter, you can easily cope with even the tightest application environments. The movable clamp arm can be fully retracted into the device, so that you can grip cables in control cabinets like with a hook, for example. Measuring in confined spaces has never been so convenient.Using the testo 770-1 current clamp meter is also easier and more reliable than ever before. It automatically detects and selects AC/DC and other electrical parameters such as resistance, continuity, diode and capacitance. The starting current can also be measured. What's more, the two-line display shows your measured values clearly and concisely.

ROLINE internal power supplyTo extend the SATA power connectionSATA plug/SATA socket, length 30 cm

ROLINE internal power supplyY power supply cable, for example, to supply power to hard disks or other drivesY adapter cable with conversion of the S-ATA power connection to up to three additional S-ATA interfaces3x S-ATA plug/1x S-ATA, length 15 cm and 15 cm

Inrush current limiter

PAN 200A+ digital current clamp meter 200 A AC with automatic function selectionResolution: 1 mAContactless voltage tester (NCV)1-pole phase test with audible alarmDigital display 13 mmBacklightAutomatic range selectionData holdAutomatic shut-off Included in delivery: operating instructions, test lead, bagTechnical dataDC voltage (V =) 0.1 V - 600 VAC voltage (V ~) 0.1 V - 600 VAC (A ~) 1 mA - 200 AResistance (O) 1 O - 6 kOAcoustic continuity tester - Frequency (Hz) 40 Hz - 1000 HzAccuracy (%) 0.5% - 2.5%Jaw size (mm) 20 mmDimensions of device: 159 x 60 x 29 mmWeight (gross/net) 316/122 gRequired battery(s): 2 x 1.5 V AAAMeasurement category (CAT) CAT III 600 V

PAN 100AD+ digital current clamp meter 100A AC/DC with automatic function selectionResolution: 1 mA1-pole phase test with audible alarmContactless voltage tester (NCV)Digital display 13 mmBacklightAutomatic range selectionData holdAutomatic shut-off Included in delivery: operating instructions, test lead, bagTechnical dataDC voltage (V =) 0.1 V - 600 VAC voltage (V ~) 0.1 V - 600 VDC (A =) 1 mA - 100 AAC (A ~) 1 mA - 100 AResistance (O) 1 O - 6 kOAcoustic continuity tester - Frequency (Hz) 40 Hz - 1 kHzAccuracy (%) 0.5% - 2.5%Jaw size (mm) 12 mmDimensions of device: 159 x 60 x 29 mmWeight (gross/net) 322/111 gRequired battery(s): 2x 1.5 V AAAMeasurement category (CAT) CAT III 600 V

application: working current Warranty: 2 years Number of contacts: 4 Rated Voltage [V]: 12 Rated current [A]: 100 Supplementary Article/Supplementary Info: with holder