107 products were found matching your search for stripper in 1 shops:

Fully insulated automatic stripping pliers for all common, flexible and solid conductors from 0.2 to 6.0 mm².Adjustable length stop from 5 to 12 mm, removable if required.Tested according to VDE standard for work on live wires up to 1000 volts.

Stripping data cables quickly and easilyWEICON Data-Strip No. 30 is very versatile. In addition to data cables, control cables, patch cables, telephone cables and bus cables can also be stripped easily and safely.With the WEICON Data-Strip, shielded data cables and special cables with a diameter of 4 - 10 mm and insulation thicknesses of 0.2 to 1.4 mm can be stripped. The integrated adjusting wheel allows the blade to be set to different insulation thicknesses, foil shielding to be scribed and easily removed. The infinitely adjustable blade can be replaced as required. Another function is the stripping of stranded wires with a length stop in the range of 0.2 - 0.8 mm. The integrated side cutter effortlessly cuts cables with a diameter of up to 8 mm. WEICON Data-Strip was developed with work safety in mind. The tool is 100% Made in Germany, is made of glass fiber reinforced plastic, is fully insulated, robust, ergonomically shaped and sits comfortably in the hand.WEICON Data-Strip has been specially designed to meet the needs of professional users and is used in both trade and industry.Here are some examples of cable types: Control cable LIYCY, data cable Cat.7 (TN 7000-1) Cat.5, patch cable, fire alarm BMK-JY(ST)Y telephone JY(ST)Y / A-2YF(L)2Y, bus cable EIB-Y(ST)Y 1. open latch. Inner blade adjustable via adjusting wheel, for different insulation thicknesses 0.2 - 1.4 mm.2. release lock. Insert cable Ø 4 - 10 mm. Rotate the stripper 2 to 3 times around the cable3. remove the outer sheath4. score the shielding5. set the length stop from 3.5 - 14 mm in 1.5 mm increments6. set the working range according to the cable, Ø 0.2 - 0.8 mm7. strip the stranded wire8. shorten the strand. Application Solid side cutter max. Ø 2 mm Control cable max. 8 mmNote: This tool may only be used on potential-free cables and wires that are not live.

Lowers your costs: Long-lasting and robust thanks to metal blade insert.Protects your health: Damper enclosed for large cable cross-sections to reduce recoil and protect wrists.Saves time: Blades quickly exchanged by immediately available replacement blades in the handle.Increases your efficiency: Automatic stripping pliers for a wide range of cables between 0.03 and 16 mm².Wiha's automatic stripping pliers promise to deliver ''Skinning made easy''. The cutting function allows cables to be trimmed to the desired length. The integrated hand protection on the blade guards against injury and prevents cables in the cable assembly from being damaged accidentally thanks to its automatic closing function. Users can skin cables ranging between 0.03 and 16 mm² with just one set of pliers. The adjustable longitudinal stop ensures precise handling. The stripping pliers also impress thanks to their whisper-quiet function. The supplied damper can be inserted into the pliers to reduce recoil and protect the wrist when skinning large cable gauges of 6 mm² and above. The spare blades and exchange aids contained in the handle are ready for use instantly. Once the handle is locked into place, these stripping pliers save space and are securely locked, making them ideal to carry from job to job.Application: For stripping, skinning and trimming cables between 0.03 and 16 mm².

Ergonomically designed handle shape with pleasantly designed slip guardMore safety thanks to non-slip soft componentsGood power transmission when pulling the knife through thumb recess and ''finger hook'' at the end of the handleTransparent protective capStable, fixed hook bladeSuitable for round cablesBlade: special tool steel, oil-hardened

pliers chrome plated, handles with multi-component grips

pliers black atramentized, head polished, handles with multi-component grips

Ergonomically designed handle shape with pleasantly designed slip guard More safety due to non-slip soft components Good power transmission when pulling the knife through thumb cavity and ''finger hook'' at the end of the handle Transparent protective cap Narrow, fixed hook blade, crescent-shaped Suitable for sector cables Blade: special tool steel, oil-hardened

For stripping thin copper conductors 0.3 - 1.0 mm² (AWG 23-18)Precise stripping due to tool's stepwise adjustment to the conductor diameter• With wire stripper• With length stop: adjustable from 4.0 to 15.0 mm• With safety catch• Housing: plastic, impact-proof

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross sectionIncrements in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm)easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nutShear blade for cutting copper cable up to Ø 15 mm (5 x 2.5 mm²)slim dimensions for easy accessbolted joint: precise, zero backlash operation of pliersHigh-grade special tool steel, forged, multi stage oil-hardened

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too.a second pair of blades holds the remaining insulation reliably in placereplaceable shaped blade adapted precisely to the respective conductor cross-sectionwith length stop for constant stripping length during repetitive workpliers body: steelblade: special tool steel, oil-hardenedespecially for cables in accordance with the American specification (AWG)

pliers black atramentized, head polished, handles with multi-component grips

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross sectioneasy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nutSpecial tool steel, forged, oil-hardenedPliers with integrated, insulated tether attachment point for a tool tether

With long cutting edge High cutting performance due to power joint Precision stripping holes for conductors 1.5 and 2.5 mm² Convenient cutting of NYM cables up to 5 x 2.5 mm² Long tips for the finest cutting work even in confined conditions Inductively hardened precision cutting edges, cutting edge hardness approx. 60 HRC Vanadium electric steel, forged, multi-stage oil-hardened

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too.a second pair of blades holds the remaining insulation reliably in placereplaceable shaped blade adapted precisely to the respective conductor cross-sectionwith length stop for constant stripping length during repetitive workpliers body: steelblade: special tool steel, oil-hardenedespecially for cables in accordance with the American specification (AWG)

Parabolic replacement blades for KNIPEX PreciStrip16 .

This compact and lightweight wire stripping tool is suitable for solid 16 - 26 AWG wires. The precision ground stripping holes cut wires cleanly and allow for easy removal of insulation. The narrow tapered tip fits into tight work areas.

This compact, lightweight wire-stripping and cutting toolis designed to cut 10 - 18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.

Duo-Crimp for stripping and crimping with only one tool. Stripping of conductors with 0.5 to 6.0 mm². Thespecial scanning system adjusts automatically to the wire diameter. Crimping of bootlace ferrules from 0.5 to 2.5 mm² and 4.0 to 6.0 mm². With built-in side cutter up to 6.0 mm² (flexible) and 4.0 mm² (solid).

Fully insulated automatic stripping pliers for all common, flexible and solid conductors from 0.2 to 6.0 mm². Adjustable length stop from 5 to 12 mm, removable if required. Built-in side cutter up to a diameter of 2 mm.