13 products were found matching your search for temporarily in 3 shops:

Moisturizing face care, ideal for acne skin, temporarily dry or irritated by dermatological treatments.

Safety for customers, guests and employees: The removable floor marking tape is suitable for temporarily labelling safety areas and maintaining distances.Removable, self-adhesive floor marking tapeMarking tape for sticking on interior floors, such as in a supermarket, gym, hotel, restaurant or petrol station and for close-proximity services, such as hairdressers and physiotherapistsThe surface to be glued must be smooth, stable, clean and free of grease and dustAccording to ASR A1.3 and DIN EN ISO 7010Two-colour marking tape corresponding to ASR A1.5/1.2 ''Floors'' in accordance with DIN 51130 Anti-slip (R-group) R9Colour similar to RAL 1003/9004 Signal yellow/Signal blackDimensions (W x H x L): 50 mm x 0.5 mm x 15 m

Nourishing body care for naturally dry or temporarily dry skin.

For the daily bath of newborns and babies with naturally dry or temporarily dry skin - Gently cleanses the skin without damaging it thanks to its creamy, soap-free texture (physiological pH) - Helps protect and strengthen the hydrolipid film against aggression exterior - Moisturizes the appeal, relieves feelings of discomfort, thanks to the nourishing-protective complex combining Cold Cream and ceramides (key skin lipids) - Leaves skin smooth, supple and protected - High skin tolerance - No parabens - No phthalates - Without phenoxyethanol

CHALK markers set of 6, 15 mmThe perfect starter set with bright-coloured chalk markers. The chalk ink can be applied temporarily to smooth, non-absorbent surfaces such as glass or mirrors. With unique jet black without grey effect and metallic colours. In addition, the red and black colours are rainproof. These sets feature 4-mm round tips.Basic set 1:1 x 001 metallic silver1 x 002 metallic gold1 x 003 red1 x 004 black2 x 005 whiteDetails:Intense colour chalk marker 15 mm setsBright, water-based chalk inkCan be wiped off smooth, non-absorbent surfacesQuick-dryingVery well suited for windows, mirrors, glass, tiles, metal, plastic, slate and canvasRefillableReplaceable tipsMiscible to a degreeMade in GermanyBefore use, test the surfaces for suitability.

CHALK markers, set of 6, 4 - 8 mmThe perfect starter set with bright-coloured chalk markers. The chalk ink can be applied temporarily to smooth, non-absorbent surfaces such as glass or mirrors. With unique jet black without grey effect and metallic colours. In addition, the red and black colours are rainproof. These sets feature 4-mm round tips.Basic set 1:1 x 001 metallic silver1 x 002 metallic gold1 x 003 red1 x 004 black2 x 005 whiteDetails:Intense colour chalk markers, set of 6Bright, water-based chalk inkCan be wiped off smooth, non-absorbent surfacesQuick-dryingRaindrop-resistant: red/blackVery well suited for windows, mirrors, glass, tiles, metal, plastic, slate and canvasRefillableReplaceable tipsMiscible to a degreeMade in Germany

CHALK markers set of 6, 4 mmThe perfect starter set with bright-coloured chalk markers. The chalk ink can be applied temporarily to smooth, non-absorbent surfaces such as glass or mirrors. With unique jet black without grey effect and metallic colours. In addition, the red and black colours are rainproof. These sets feature 4-mm round tips.Basic set 1:1 x 001 metallic silver1 x 002 metallic gold1 x 003 red1 x 004 black2 x 005 whiteDetails:Chalk marker setsWater-based chalk inkCan be wiped off smooth, non-absorbent surfacesQuick-dryingRaindrop-resistant: red/blackVery well suited for windows, mirrors, glass, tiles, metal, plastic, slate and canvasRefillableReplaceable tipsMiscible to a degreeMade in Germany

ProPlus battery terminal with circuit breaker Universal application for 6V. 12V and 24V to disconnect the battery without tools. Prevents leaks of any kind and is also very effective as an anti-theft system. Ideal for vehicles that have to be stationary temporarily. Place this main switch on the negative negative pole of the car battery and then connect the battery cable to the circuit breaker. Simply loosen the knob and the circuit will be interrupted. If you want to start driving. simply turn the knob! The circuit will be resumed and you can start the vehicle again. Specifications: - Color: gold Material: brass. plastic. steel - Dimensions: 83 x 35 x 34 mm (L x W x D) - Voltage: 6-24 Volts - Connection type: flat - Maximum load continuous: 125 Amps - Maximum peak load: 500 Amps - Conductor cross section wire: 16-25 mm² - Clamping diameter battery pole: 17.5 mm - Fits batteries with DIN battery terminals. - Comes in a blister pack. Guarantee: 2 years Parameter: (-) Battery Clamp Version: For minus pole Inner diameter [mm]: 17.5 Battery pole type: DIN

ProPlus battery terminal with circuit breaker Universal application for 6V. 12V and 24V to disconnect the battery without tools. Prevents leaks of any kind and is also very effective as an anti-theft system. Ideal for vehicles that have to be stationary temporarily. Place this main switch on the negative negative pole of the car battery and then connect the battery cable to the circuit breaker. Simply loosen the knob and the circuit will be interrupted. If you want to start driving. simply turn the knob! The circuit will be resumed and you can start the vehicle again. Specifications: - Color: gold - Material: brass. plastic. steel - Dimensions: 101 x 35 x 35 mm (L x W x D) - Voltage: 6-24 Volts - Connection type: flat - Maximum load continuous: 125 Amps - Maximum peak load: 500 Amps - Conductor cross section wire: 16-25 mm² - Fits batteries with flat battery terminals. - Can be used in combination with DIN battery terminals when use is made of battery terminals with bolt. Parameter: (-) Battery Clamp Version: For minus pole Battery pole type: DIN Guarantee: 2 years

Connects a VGA monitor to a DVI graphics card.Do you want to temporarily connect your new TFT to the VGA port with the DVI-I cable connected? Or do you already have a new graphics card with DVI-I connector but still have a VGA monitor? Then you need our DVI to VGA adapterAdapter with 15-pin HD socket and DVI-I plug1st end: DVI-I 24+5 plug2nd end: HD D-Sub 15-pin (HD-15), VGA socket

Connects a DVI monitor to a VGA graphics card.Do you want to temporarily connect your new TFT to the VGA port with the DVI-I cable connected? Or do you already have a new graphics card with DVI-I connector but still have a VGA monitor? Then you need our DVI to VGA adapterAdapter with 15-pin HD plug and DVI-I socket1st end: HD D-Sub 15-pin (HD-15), VGA plug2nd end: DVI-I 24 + 5 socket

This GNSS antenna by Navilock can be used on an existing GNSS receiver, car radio or vehicle multimedia receiver with FAKRA C connection. The antenna is waterproof and can therefore be used temporarily outside the vehicle.Specification • Connector: 1 x FAKRA C Jack• FAKRA C: RAL 5005 Signal blue• Frequency range: 1575.42 MHz• GALILEO: E1 1,5754200 GHz, GPS: L1, 1.5754200 GHz• Band width: 2 MHz• Antenna gain: 27 dBi• Impedance: 50 Ohm• Mounting: Magnet base• Housing material: ABS• Colour: black• Protection class: IP67• Cable type: RG 174/U• Cable colour: black• Cable attenuation: 1.1 dB @ 1500 MHz per meter• Cable length incl. connector: ca. 3 m• Dimensions (LxWxH): 40.5 x 38.0 x 12.0 mm• DC input: 3.0 - 5.5 V• Power consumption: 11 mA @ 3.0 V typ. 15 mA @ 3.0 V max.• Weight: 150 gSystem requirements • Device with a free FAKRA C plugPackage content • AntennaPackage • Poly bag

Stand with two drawers for positioning a monitor or printerFeaturesStable platform - for positioning a monitor or printer - in trendy designWith two drawers for storing documents, pens and office suppliesLower drawer with slots for temporarily positioning the keyboardSide slide-in handles for easier movement of the standPlatform size: 450 x 350 mmHeight 115mmSingle drawer height 45 mmColour: grey/black