4563 products were found matching your search for terminal in 1 shops:

Slot 3.5 x 0.5 mmSimply clamped. When space is tight, such as in a distribution cabinet, operating spring clamps is particularly tough. Screwdrivers block the view of the terminal and make it difficult to work, as one hand is required for the screwdriver, while the other hand must be used to feed the conductor. The spring cutter improves accessibility thanks to its 40° curved blade which provides a clear view of the clamp. In addition, the blade remains held in the clamp when inserted, so that both hands can be used to insert the cable. The operation tool is characterised by optimum grip thanks to the SoftFinish® handle design. Work is therefore gentle on hands and muscles, durability is ensured even with continuous use thanks to its sturdy metal blade.Application For operating spring clamps. For opening pull clamps on Z-terminal blocks.

FMB204 Waterproof Tracker with High Capacity internal Li-Ion battery3x Digital Inputs2x Digital Outputs1x Analog Inputs1x 1-wire data1x 1-wire power1x Micro USB 2.01x SIM slot128 MB internal Flash memory1800 mAh Li-Ion battery (6.66 Wh)Wireless bandsGSMGPRSGPSBluetoothFMB204 is a SPECIAL waterproof (IP67) tracker with GNSS, GSM and Bluetooth connectivity. Designed to work longer without external power supply - internal Li-ion battery enables device to operate up to 6 days in power saving mode. FMB204 is perfectly suitable for motorbike, scooter and water transport tracking, it can also be used in agricultural machinery and trailer monitoring, security or emergency service fleet management. Device supports various Bluetooth Low Energy sensors, beacons, hands-free headset, firmware and configuration update via Bluetooth.Use CasesMotorbikes and ScootersTrailers TrackingPublic Safety ServicesWater TransportDelivery TransportAgriculture Transport

FMT100 Easy Installation GPRS / GNSS Tracker1x MicroUSB 2.01x Micro-SIM slot128 MB internal flash memory170 mAh Li-Ion battery 3.7 V (0.63 Wh)Wireless bandsGSMGPRSGNSSBluetoothTeltonika FMT100 small, smart and waterproof GNSS SPECIAL tracker with Bluetooth connectivity and internal backup battery. Biggest in its class internal High Gain GNSS antenna allows mounting directly on car battery under the hood. FMT100 is equipped with special clamp connector for fast power cable connection to the car battery. Solid waterproof case and built-in accelerometer sensor with extremely accurate crash trace functionality makes this device perfectly suitable for insurance market solutions.Use CasesLight vehiclesTaxiInsurance Telematics (UBI)Courier Delivery ServicesRental and Leasing

Control cabinet (terminal box with flange)The small KX enclosure with flange enables flexible interior fitting and simple cable grommet with optimum use of space.Sturdy sheet steel construction, body folded and welded in one piece, with all-round protective channel at the lid opening, rear panel with pull-throughs for wall mounting brackets, lid with foamed PU foam seal, with protective conductor connection in the enclosure and via U-bracket in the lid, for quick and easy earthing. With mini locking handle locks and enclosure base with sheet steel flange plate.QR codePrinted QR code on body, lid and type plate for clear identification and easy retrieval of relevant product information anddocumentation, as well as clear traceability of the individual parts.AccessoriesLid hinge, lid bracket, mounting plate, rail mounting, wall mounting bracket, metal flange plates, cable grommet, modular, fixing claw for second mounting level.MaterialEnclosure, lid: sheet steelSurface finish: Triple surface treatment for corrosion protection and resistance to mineral oils, lubricants,machining emulsions and solvents: nanoceramic coating, electrophoresis immersion primerExterior surfaces powder-coated in RAL 7035 structure.Technical dataProtection class to IEC 60 529: IP 55Protection class to UL508A: Type 12Dimensions (W x H x D): 300x200x120 mm

Control cabinet (terminal box with flange)The small KX enclosure with flange enables flexible interior fitting and simple cable grommet with optimum use of space.Sturdy sheet steel construction, body folded and welded in one piece, with all-round protective channel at the lid opening, rear panel with pull-throughs for wall mounting brackets, lid with foamed PU foam seal, with protective conductor connection in the enclosure and via U-bracket in the lid, for quick and easy earthing. With mini locking handle locks and enclosure base with sheet steel flange plate.QR codePrinted QR code on body, lid and type plate for clear identification and easy retrieval of relevant product information anddocumentation, as well as clear traceability of the individual parts.AccessoriesLid hinge, lid bracket, mounting plate, rail mounting, wall mounting bracket, metal flange plates, cable grommet, modular, fixing claw for second mounting level.MaterialEnclosure, lid: sheet steelSurface finish: Triple surface treatment for corrosion protection and resistance to mineral oils, lubricants,machining emulsions and solvents: nanoceramic coating, electrophoresis immersion primerExterior surfaces powder-coated in RAL 7035 structure.Technical dataProtection class to IEC 60 529: IP 55Protection class to UL508A: Type 12Dimensions (W x H x D): 600x400x120 mm

This Delock RCA to terminal block adapter can be used to connect stranded wires with stripped ends. This makes the adapter suitable for special industrial applications and also for audiovisual hobbies. The adapter can be used to create custom connections to devices with RCA connectors. • Connectors: RCA plug 2-pin terminal block• Pitch 5.0 mmPackage contents• AdapterPackaging• Polythene bag

Universal clamping strips20 clamping lugsReady to handle any partBasic body with 2 slotted holesfor variable screwing, also on perforated plates2 clamping lugs cover each object to protect the materialClamp lugs made of oil- and cold-resistant plastic, flexible, durableBasic body made of anodized light metalDimensions / length: 440 mmNet weight (kg): 0.1 kg

Security keyboard with integrated smart card terminalSmart, wired security keyboard with integrated chip card terminalSecure PIN entryPC/SC smartcard readerProtocols: T=0, T=1, S=8, S=9, S=10EMV 2000 Level 1 approvedCCID compatibleReading/writing ISO 7816 compliant smartcardsFlat design, low smart card contacting unitSatisfies requirements defined by FIPS-201German version with DIN/GS compliant layoutDriver support for Windows/MacOS-X/LinuxOne-handed operation of smart card moduleGerman version complies with BGI 650 guidance for ergonomicsAwarded the ''Blaue Engel'' environmental sealLasting reliability. Timeless elegance. Intelligent concept. CHERRY KC 1000 SC combines the benefits of a classic CHERRY office keyboard with the security-related requirements of a security keyboard.

QUICK and SAFE - The holder for cashless payment systemsThe HT 35 is a practical fixed holder for card terminals, suitable for almost all models. The padded mounting clips can be easily adjusted to the width of your device. With the flexible joint and integrated handle, your customers can easily turn and tilt the terminal in any direction. Enable your customers to pay conveniently, quickly and securely without cash.Flexible width adjustment: fits most device sizes and shapes360° swivel function with handle enables visibility from all sidesCan be tilted up or down for optimal readability of the displayThe screw base provides additional stability and safetyTechnical details:Tilt: + 45° ~ - 45°Rotatable: 360°With cable managementWith silicone pads on the mounting clipsIncludes mounting materials and installation instructionsFor devices with a width of 2.8'' - 4.3'' (7.1 - 10.9 cm), for cash register systems (point of sale)

These pluggable PCB edge connectors can be connected to each other without any pole loss.Screw terminalConnection direction: 0°Lift system

selve universal adjustment cableThe adjustment cable has a 3 m supply line with protective contact angle plug.The lead-off with quick-action terminal is 1.5 m long. The housing of the control element measures 124.5 mm in height and 50.0 mm in width.

Intelligent security keyboard with integrated reader for smart cards and cards/tags with RF/NFC interfaceSecure mode through authentication and encryption, especially with thin clientsPC/SC smart card reader, CCID compatiblePROTOCOLS: T=0, T=1, T=CLRead/write ISO 7816 and ISO 14443 a/B compliant cardsLow profile design, low chip card contact unitMeets the requirements of FIPS-201DE version with DIN/GS-compliant layout and complies with BGI-650 ergonomics GuideStandard driver for Windows and LinuxOne-handed operation of the chip card moduleAwarded with the Blue AngelTHE SECURE BOARD 1.0 presents itself on the one hand as an ergonomic keyboard with integrated reader for smart cards and cards/tags with RF/NFC interface. For added security and confidence, the keyboard can be switched to a safe mode. Now the device can prove its authenticity certificate-based and the key transmission is encrypted. Thus, hardware keyloggers have no chance and by blocking the standard keyboard channel ''bad USB attacks'' are no longer possible. Thin clients that have integrated the necessary software are particularly suitable for the use of these functions.

Sturdy and smart. The SmartTerminal ST-1144 reads and write your chip cards, while using an extremely low level of power consumption. Whether it's access controls, network logon or chip-card-based Internet transactions — the SmartTerminal with USB port helps you protect your sensitive data in an easy and reliable way. The certification in accordance with international standards, including FIPS 201, CAC and CCID, means that this SmartTerminal can be used universally. Function and performance ''One-hand operation'' thanks to its heavy weight and sturdy standHigh-quality USB chip card readerCompatible chip card types: reads and writes to all ISO 7816 cardsUSB 2.0 compatiblePC/SC chip card readerLow power consumption in idle state: 2 mAMating cycles: approx. 100,000 operationsProtocols: T=0, T=1, S=8, S=9, S=10CCID compatibleEMV 2000 Level 1 approvedCAC and FIPS 201 certifiedTAA compliant

Intelligent security keyboard with integrated reader for smart cards and cards/tags with RF/NFC interfaceSecure mode through authentication and encryption, especially with thin clientsPC/SC smart card reader, CCID compatiblePROTOCOLS: T=0, T=1, T=CLRead/write ISO 7816 and ISO 14443 a/B compliant cardsLow profile design, low chip card contact unitMeets the requirements of FIPS-201DE version with DIN/GS-compliant layout and complies with BGI-650 ergonomics GuideStandard driver for Windows and LinuxOne-handed operation of the chip card moduleAwarded with the Blue AngelTHE SECURE BOARD 1.0 presents itself on the one hand as an ergonomic keyboard with integrated reader for smart cards and cards/tags with RF/NFC interface. For added security and confidence, the keyboard can be switched to a safe mode. Now the device can prove its authenticity certificate-based and the key transmission is encrypted. Thus, hardware keyloggers have no chance and by blocking the standard keyboard channel ''bad USB attacks'' are no longer possible. Thin clients that have integrated the necessary software are particularly suitable for the use of these functions.

Terminal strip with wire protection5-pinSpacing 5.08 mmRated current: 13 ANominal cross-section: 2.0 mm² single-wire 1.5 mm² extra-fine wireSoldering pins: Ø 0.9 mmWithout slot and keyManufacturer: RIA

The enclosure is perfect for cable junction boxes and can be quickly and easily mounted on the wall or ceiling. Due to the metric cut-outs, cable entry via the sealing membranes included in the scope of delivery is possible without special tools. The enclosure is made of halogen-free ABS plastic and has IK07 impact resistance.

With this plug-in spring-loaded terminal with push-button, for loosening the wires from the terminal, the wire entries on the non-codable side are parallel to the insertion direction. The terminals can be connected together without loss of pole.Connection direction 0°

In addition to the system features of the CLIPLINE complete system, the push-in terminals are characterized by simple and tool-free wiring of conductors with end sleeves or rigid conductorsThe compact design and the front connection enable wiring in the tightest of spacesIn addition to the test option in the double functional shaft, an additional test tap is available for all terminalsTested for railway applicationsProduct description:Connection type: Push-in connectionNumber of connections: 3Cross-section: 0.14 mm² - 4.0 mm²AWG: 26 - 12Colour: RedMounting type: NS 35/7.5, NS 35/15

Terminal strip with wire protection3-pinSpacing 5.08 mmRated current: 13 ANominal cross-section: 2.0 mm² single-wire 1.5 mm² extra-fine wireSoldering pins: Ø 0.9 mmWithout slot and keyManufacturer: RIA

RIACON - stackable terminal, 3-pin with lift system and wire feedingPitch: 6.35 mmRated current: 25 A ULNominal cross-section: 6.0 mm² solidSoldering pin: 0.8 x 1.0 mmRecommended drill Ø: 1.3 mmManufacturer: RIA CONNECTType: 701