102 products were found matching your search for thermocouple in 1 shops:

JUMPFLEX® measuring transducerTemperature-measuring transducer for thermocouples type J, KBrief description:The temperature-measuring transducer for thermocouples offers connection options for themocouples of types J and K. The thermocouple temperature-measuring transformer converts the temperature signal on the output side into an analogue standard signal. This signal can be 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 2 ... 10 V, 0 ... 5 V, 1 ... 5 V, 0 ... 10 mA and 2 ... 10 mA. The device has 3-way galvanic isolation with a test voltage of 2.5 kV.The devices can be configured via the DIP switches accessible on the side of the housing. The measurement ranges are switched in a calibrated form. The supply voltage for the device, which can be bridged quickly and cost-effectively via side push-in type jumper bars, is 24 V DC.A green LED on the front of the device signals that it is in operation. The temperature-measuring transformer meets the requirements of safe isolation as per EN 61140 with a test voltage of 2.5 kV between input/output/supply.Dimensions (mm) W x H x D: 6 x 96 x 94 (height from the top edge of the mounting rail)Connection technology: CAGE CLAMP®SSingle-wire cross-sections: 0.2 mm² ... 2.5 mm²/AWG 24 ... 12Fine-stranded cross-sections: 0.34 mm² ... 2.5 mm²/AWG 22 ... 12Insulation stripping lengths 9 ... 10 mm/0.37 inConfiguration: DIP switchInput signal: ThermocouplersOutput signal: 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 2 ... 10 V, 0... 5 V, 1 ... 5 V, 0 ... 10 mA, 2 ... 10 mAApparent ohmic resistance: 600 O (I-output) 2 kO (U-output)Step response: 60 ms/120 ms with cold-junction compensationSupply voltage: UN DC 24 VSupply voltage range: 16.8 V ... 31.2 VPower consumption at 24 V DC: Sensor types: thermocouple type J, KTemperature range type J: -150°C ... +1200°C, type K: -150°C ... +1350°CCold-junction compensation: on/off (default: on)Cold-junction error: 3 K (typ. 2 K)Transmission error: 0.1% at full span (type J, K)Transmission error of the adjusted span (150 K/adjusted span [K])%Temperature coefficient: 0.04 %/KMin. span: 100 K (configurable)Test voltage: (input/output/supply) 2.5 kV AC, 50 Hz, 1 min.Ambient temperature: -25°C ... +70°CStorage temperature: -40°C ... +85°C

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CSensor design: hemispherical with M8x1 screw connection, anti-kink spring, installation depth 10 ... 15 mmcable cross-section: 0.22 mm²cable material: GLS/GLS DHGlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span. The good heat transfer between sheeth and thermocouple allows short response times and high measuring accuracy. The mineral insulated thermocouples are available with B+B miniature thermocouple connectors, B+B standard thermocouple connectors or with high-quality FEP silicon connection cable up to 180 °C with free ends. Due to their characteristics they are used in chemical plants, power plants, pipelines, motor construction and at test stands.

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CSensor construction: 15 x 30 x 0.5 mm, bent Ø 100 mm ±5 mm, anti-kink springwire cross-section: 0.22 mm²Cable material: GLS/GLS DHGlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In seiner Produktlinie hotcontrol Temperaturfühler bietet hotset in acht Baureihen eine große Auswahl einbaufertiger und normgerechte Thermoelemente und Widerstandsthermometer zur Messung von Temperaturen von bis zu 1.600 °C an. Besonderes hervorstechend sind die möglichen 400 °C an der Anschlusshülse und der minimale Durchmesser von nur Ø 0,5 mm beim Mantelthermoelement.Die Temperatursensoren eignen sich für die berührende Messung fester, flüssiger und gasförmiger Medien in den Geräten, Apparaten und Anlagen von Kunststofftechnik, Stahl- und Keramikindustrie, Pharmazeutik, Medizintechnik, Chemietechnik, Energiewirtschaft, Verpackungstechnik oder Maschinenbau. So werden sie etwa in den Heißkanaldüsen von Spritzgießwerkzeugen, in Systemen für die Rauchgasanalyse und in Prüfständen für Verbrennungsmotoren verbaut. Auch für Ofenbauer, Hersteller von Laborgeräten und Anlagenbauer in der Stahlindustrie sind sie wichtige Systemkomponenten. Während die hotcontrol Thermoelemente als kostengünstige, robuste Sensorlösung mit schnellen Ansprechzeiten gelten, überzeugen die hotcontrol Widerstandsthermometer durch ihre hohe Messgenauigkeit und Langzeitstabilität. SpezifikationenTemperaturbereich 0 ... 400 °CDurchmesser: 4mmFühleraufbau: Flansch 20x8x8 mmLeitungsquerschnitt: 0,22 mm²Leitungsmaterial: GLS/GLS DHGGrenzabweichung: Klasse 2 (DIN), Standard (ANSI 96.1)

In its product line hotcontrol temperature sensors hotset offers in eight series a large selection of ready-to-install and standard-compliant thermocouples and resistance thermometers for the measurement of temperatures up to 1,600°C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CSensor design Bayonet cap Ø i = 14.2 mm, compression spring 200 mm, installation depth 25 ... 200 mmCable cross-section: 0.22 mm²Cable material: GLS/GLS DHGlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its product line hotcontrol temperature sensors hotset offers in eight series a large selection of ready-to-install and standard-compliant thermocouples and resistance thermometers for the measurement of temperatures up to 1,600°C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CSensor design Bayonet cap, Ø i = 12.2 mm, compression spring 200 mm, installation depth 25 ... 200 mmCable cross-section: 0.22 mm²Cable material: GLS/GLS DHGlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its product line hotcontrol temperature sensors hotset offers in eight series a large selection of ready-to-install and standard-compliant thermocouples and resistance thermometers for the measurement of temperatures up to 1,600°C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

Compact thermometer with data logger functionStrengthsCompact and with magnetic holder for stationary or mobile applicationsLarge illuminated displayStorage of up to 1 million measured valuesMeasurement of temperature differences ?TCan be networked via USB or BluetoothAlarms and recording start via alarm valueUp to 3 years battery operationEnclosure protection rating IP54Data Logger Transfer software with automatic report generationDescriptionThe CA 1822 is a compact contact thermometer with magnetic holder that guarantees accurate, versatile and reliable measurements in stationary and mobile applications. The device has a large illuminated display, all the functions required on site such as min, max display, ?T, hold, and it can store measured values manually or according to programming.The device can be networked via USB or Bluetooth, so alarms and a start of the value recording can be programmed via the Data Logger Transfer software.

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

In its hotcontrol temperature sensor product line, hotset offers a wide selection of ready-to-install and standard-compliant thermocouples and resistance thermometers in eight series for measuring temperatures of up to 1,600 °C. Particularly outstanding are the possible 400 °C at the connection sleeve and the minimum diameter of only Ø 0.5 mm at the sheath thermocouple.The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. SpecificationsTemperature range 0 ... 400 °CCable cross-section: 0.22 mm²Cable material: GLS/GLSlimiting deviation: class 2 (DIN), standard (ANSI 96.1)

The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in devices, apparatus and systems in plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology and mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. Series informationall dimensions are subject to general tolerances according to DIN 2768-m. Many articles are manufactured with lower tolerancesexact tolerances for your article are available on requestall thermocouples are available according to ANSI standard. other standards on requestall dimensions for sheathed thermocouples are subject to tolerances according to EN 61515Specifications:wire cross section: 0,22 mm²minimum bending radius: 5.0 x sheath diameterlimiting deviation: class 1 or 2 (DIN 60584) standard, special (ANSI 96.1)

The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in devices, apparatus and systems in plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology and mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. Series informationall dimensions are subject to general tolerances according to DIN 2768-m. Many articles are manufactured with lower tolerancesexact tolerances for your article are available on requestall thermocouples are available according to ANSI standard. other standards on requestall dimensions for sheathed thermocouples are subject to tolerances according to EN 61515Specifications:wire cross section: 0,22 mm²minimum bending radius: 5.0 x sheath diameterlimiting deviation: class 1 or 2 (DIN 60584) standard, special (ANSI 96.1)

The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in devices, apparatus and systems in plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology and mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. Series informationall dimensions are subject to general tolerances according to DIN 2768-m. Many articles are manufactured with lower tolerancesexact tolerances for your article are available on requestall thermocouples are available according to ANSI standard. other standards on requestall dimensions for sheathed thermocouples are subject to tolerances according to EN 61515Specifications:wire cross section: 0,22 mm²minimum bending radius: 5.0 x sheath diameterlimiting deviation: class 1 or 2 (DIN 60584) standard, special (ANSI 96.1)

The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in the devices, apparatus and systems of plastics technology, steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, energy industry, packaging technology or mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. Series informationall dimensions are subject to general tolerances according to DIN 2768-m. Many articles are manufactured with lower tolerancesexact tolerances for your article are available on requestall thermocouples are available according to ANSI standards. other standards on requestall dimensions for sheathed thermocouples are subject to tolerances according to EN 61515Specifications:wire cross section: 0,22 mm²minimum bending radius: 5.0 x sheath diameterlimiting deviation: class 1 or 2 (DIN 60584) standard, special (ANSI 96.1)

The temperature sensors are suitable for contact measurement of solid, liquid and gaseous media in devices, apparatus and systems in plastics technology, the steel and ceramics industry, pharmaceuticals, medical technology, chemical technology, the energy industry, packaging technology and mechanical engineering. For example, they are installed in the hot runner nozzles of injection molds, in systems for flue gas analysis and in test benches for combustion engines. They are also important system components for furnace builders, manufacturers of laboratory equipment and plant constructors in the steel industry. While the hotcontrol thermocouples are regarded as a cost-effective, robust sensor solution with fast response times, the hotcontrol resistance thermometers convince with their high measuring accuracy and long-term stability. Series informationall dimensions are subject to general tolerances according to DIN 2768-m. Many articles are manufactured with lower tolerancesexact tolerances for your article are available on requestall thermocouples are available according to ANSI standard. other standards on requestall dimensions for sheathed thermocouples are subject to tolerances according to EN 61515Specifications:wire cross section: 0,22 mm²minimum bending radius: 5.0 x sheath diameterlimiting deviation: class 1 or 2 (DIN 60584) standard, special (ANSI 96.1)