10575 products were found matching your search for milled in 4 shops:

The Stiletto TI16MC is a 16 Oz. Titanium Milled Face Hammer with 18 in. Curved Hickory Handle. The Hammer has a straight claw design and Stiletto's signature Magnetic Nail Starter. The TI16MC has the comparable striking force of 28 Oz Steel hammer and is recommended for residential framing and remodeling. Stiletto Tool Company has been synonymous with high quality hand tools dating back to 1849. With its long history and strong reputation, the brand has evolved into the modern day standard for innovative, lightweight, ergonomic, productive, and professional tools. We set the standard with our line of premium titanium hand tools that span numerous trades such as framing, remodeling, finish work, siding, demolition, concrete, and drywall. Titanium is 45% lighter weight while providing the same striking force and strength as steel. Titanium tools also produce 10 times less recoil shock which helps reduce carpal tunnel syndrome. The combination of these features means less down time, more productivity, and most importantly less pain while working.

The 22 oz. Rip Hammer with milled face has a bonded and molded Shock Reduction Grip that reduces shock up to 70 percent and will not come off. Estwing hammers are the only hammers that can make this claim. The head and handle are forged in 1-piece and are fully polished. This tool has unsurpassed balance and temper. Longer handle and heavier head for driving large common nails. Milled face designed to reduce glancing blows and flying nails when used in framing unexposed wood. Made in USA. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

Elevate your winter style with these Dr. Martens 1460 LTT FL Black Milled Nappa boots for women.

EstwinEstwing’s 28 oz. Milled-face framing hammer is forged in one piece of solid steel and fully polished, offering unsurpassed balance and temper. This hammer features a bonded and molded shock reduction grip that reduces shock up to 70 percent and will not come off, while the long handle and heavy head make it ideal for driving large common nails. Its milled face is designed to reduce glancing blows and flying nails when used in framing unexposed wood.

Great for driving nail after nail on big framing jobs, this framing hammer features our patented IsoCore shock control system to reduce shock and vibration by 4X. This rugged, powerful framing hammer allows you to get all of your framing done while helping to reduce muscle fatigue and joint pain. Premium steel is forged into a perfectly balanced design featuring a milled face that helps prevent mist-hits. Our patented, industry-leading IsoCore shock control system absorbs strike shock and vibration, reducing the punishment your body takes and a dual-layer handle captures any lingering vibration. A magnetic nail starter helps you to start nails with one hand and a rip claw pulls nails quickly and easily. A performance handle design fits your hand securely and comfortably, whether you’re choking up for precision strikes or swinging with maximum force and strategic texturing helps improve grip while reducing blisters. This design has been tested to exceed U.S. standards for striking tool durability to withstand the toughest work environments.

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

The Stiletto TI14MC is a 14 oz. Titanium Milled Face Hammer with 18 in. Curved Hickory Handle. The Hammer has a straight claw design and Stiletto's signature Magnetic Nail Starter. The TI14MC has the comparable striking force of 24 oz. Steel hammer and is recommended for residential framing and remodeling. Stiletto Tool Company has been synonymous with high quality hand tools dating back to 1849. With its long history and strong reputation, the brand has evolved into the modern day standard for innovative, lightweight, ergonomic, productive, and professional tools. We set the standard with our line of premium titanium hand tools that span numerous trades such as framing, remodeling, finish work, siding, demolition, concrete, and drywall. Titanium is 45% lighter weight while providing the same striking force and strength as steel. Titanium tools also produce 10 times less recoil shock which helps reduce carpal tunnel syndrome. The combination of these features means less down time, more productivity, and most importantly less pain while working.

Vaughan's 23 oz. California Framer combines features of two of our most popular tools into a rugged, heavy construction hammer. The smoothly swept claws were borrowed from our 999 rip hammer and the extra large milled striking face, are a heritage of our rig builder's hatchet. The hatchet style straight 17 inch handle is American best hickory and has a large cross section where it joins the fully polished head.

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges�ensure precision where it matters most: the sole.� The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control.� The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots.� Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots.� Additionally, the mid-to-higher lofted wedges are equipped with full length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3.� The low bounce option is suited to firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack.� The standard bounce option is extremely versatile, and favors players with a neutral swing style.� The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360 respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin, while providing premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green wh

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla