39 products were found matching your search for benning in 1 shops:

Safety tests on electrical systems after installation, modification or regular repeat testing can be carried out easily and efficiently with the BENNING IT 130.Measurement functions:- Low resistance of protective conductor and equipotential bonding conductor connections (test current: 200 mA with polarity reversal)- Insulation resistance with test voltage of 50/100/250/500/1000 V- Line impedance (L-N/L) with voltage drop and short-circuit current- Loop impedance (L-PE) without FI/RCD tripping and short-circuit current- Testing of FI/RCD circuit breakers, standard and delayed (S), type AC, A, F, B, B+ with AUTO test, touch voltage, tripping time and tripping current (ramp test)- TRUE RMS Voltage, Frequency and Phase Direction Testing- First fault leakage current in the IT network- Earthing measurement via 3-wire method (optionally available via earthing set)- TRUE RMS Current via current clamps BENNING CC 1/CC 2/CC 3 (optionally available)- Illuminance via BENNING Luxmeter Type B (optionally available)Features:- NEW: Measured value memory over 4 levels: Object/block/safety/measurement point- NEW: Bidirectional interfaces (USB/RS 232)- NEW: Upload of plant structures and download of measured values- NEW: Integrated real-time clock (measured value with date/time)- NEW: Clear good/bad indication via green/red LED on test unit and switchable Commander test probe- NEW: Commander test probe with TEST and MEMORY button and bright LED measuring point illumination- NEW: Connection for barcode scanner to identify the measuring point and rename the memory location.- Help function with connection diagram- Graphic display with background lighting- Power supply via 6 NiMH-AA rechargeable batteries- Battery charging function integrated in the device- Delivery incl. bag, batteries, test leads, charging cable, switchable Commander test probe, PC software and calibration protocolProtocol software BENNING PC-Win IT 130:- NEW: Creation and transfer (upload) of plant structures to BENNING IT 130 for rational repeat testing- Measured value download and logging via test report and ZVEH test reportTechnical data:Display: Graphic display (illuminated)Low resistance measurement: 0.01 Ohm - 2 kOhmInsulation resistance: 10 kOhm - 1000 MOhmPower impendance (L-N/L): 0.01 Ohm - 10 kOhmLoop impedance (L-PE): 0.01 Ohm - 10 kOhmShort-circuit current: 0.01 A - 200 kAFI/RCD test type AC/A/F and B/B+: Tripping time, tripping current (ramp) Touch voltage, auto testRotary field: YesVoltage (TRUE RMS), frequency: 1 V - 550 V, 0 Hz - 500 HzGrounding resistance: 0.01 Ohm - 2,000 Ohm (via grounding set)Current (TRUE RMS): 0.1 mA - 400 A (via pliers)Illuminance: 0.01 lux - 20 klux (via sensor)<br ...

Unbeatable in price and performance.Safety tests on electrical systems after installation, modification or regular repeat testing can be carried out easily and efficiently with the BENNING IT 105.Product benefitsSimple operation, all measuring functions selectable via rotary switchExtra large screen (95 x 55 mm) with backlightAUTO-start function for low impedance, loop and line impedance measurementLOCK function (continuous measurement) of insulation resistanceCompensation (zero adjustment) of the measuring leads up to 10 OhmComes in rugged hard case, test probe with TEST button, test probe/crocodile clamp set, test lead with safety plug, shoulder strap, 6 x 1.5 V mignon batteries and calibration certificateMeasurement functions:Low-impedance resistance of protective conductor and equipotential bonding conductor connections (test current: 200 mA)Insulation resistance with test voltage of 250 V, 500 V and 1000 V Loop impedance (L-PE) without FI/RCD tripping (NO-TRIP) with simultaneous display of fault current (PFC)Line impedance (L-N/L) with high test current (HIGH CURRENT) with simultaneous display of short-circuit current (PSC)Testing of FI/RCD circuit breakers, standard and delayed (S) with sinusoidal (AC) and pulsating test current (A)Automatic measurement of the tripping time (½ x, 1 x and 5 x I?N) and the tripping current in ramp modeVoltage and frequency measurement up to 440 VAdditional field direction test in three-phase systems (L1-L2-L3)

BENNING VT 2 single-pole, non-contact phase and magnetic field testerIdeal for phase testing on sockets, junction boxes, switches, cables and lamps, etc. Very reliable phase testing on various earthed and CEE sockets (incl 63 A when activating the high sensitivity). To determine the absence of voltage, please only use a 2-pole voltage tester according to DIN EN 61243-3 (VDE 0682-401), e.g. a DUSPOL® voltage tester.Ideal also for magnetic field testing:Testing magnetic fields (permanent, AC and DC induced)Testing of solenoid valves in pneumatic and hydraulic systems, heating systems and pumpsTesting of relays/contactors in vehicles, machines, devices and controlsProduct benefits:Single-pole phase indication by red LED/ buzzerNon-contact voltage detectionFlashing frequency of LED test probe and buzzer frequency increasing with voltage depthCapacitive measurement method requires no current flowLow self-discharge for increased battery life/readinessVoltage measurement range 12 V/ 200 V - 1000 V AC12 V voltage range switchable via push buttonProtection class IP53Magnetic field indication via green LED test probeIntegrated test magnet for function testingBreakproof ABS housing and easy operationCAT IV 600 V / CAT III 1000 VIncludes 2 x 1.5 V Micro/ AAA/ LR03 battery, pen clip

BENNING ST 725 — Appliance tester for portable testing of electrical appliances.• Testing in accordance with VDE 0701-0702, DGUV regulation 3 (BGV [Federal Association of Health and Consumer Information] A3), German Health & Safety Regulations (BetrSichV), ÖVE ÖNORM E 8701, NEN 3140• Portable: Mains-free battery operation• Simple: Operation via push buttons and direct selection• Fast: Testing in just a few seconds• Comprehensive: Protective conductor current using differential and leakage current methods• Automatic test sequence for Class I, II, (III) appliances, extension and appliance connection cables with IEC plug• Test reading with pass/fail indicator• Preset VDE limit valuesApplication:Safety testing for electrical appliances/work equipment in compliance with VDE 0701-0702, DGUV Regulation 3 (BGV A3) and German Health & Safety Regulations (BetrSichV). Mains operation allows appliances with power supply units to be tested, such as electronically controlled appliances/tools, PCs, copiers and washing machines under operating conditions.Measuring functions:• Protective conductor resistance with > 200 mA pulsed test current — necessary for oxidised contacts• Insulation resistance with 250 V and 500 V test voltage• Protective conductor/touch current using differential method/direct measurement with mains operation and using leakage current method with battery operation• Active measurement of protective conductor current of three-phase appliances under operating conditions with optional measurement adapter• Testing of permanently installed and portable 30 mA FI/RCD/PRCD circuit breakers with tripping time measurement• Voltage measurement at external earthed socketFeatures:• Automatic test sequence for Class I (button 1), Class II/III (button 2) appliances and cable test (button 3)• Testing of cable reels, multiple distributors and appliance connection cables with IEC plug• Reduced test voltage for appliances with surge arrester• Indication of incorrect test sequence selection and if equipment to be tested is not turned on• Battery life sufficient for over 2500 test items• Test reading with pass/fail indicator, preset VDE limit valuesProduct innovations:• Memory capacity for 999 test items• Three direct buttons for saving, retrieving and printing measured values• Mini USB interface and software download for creating test reports in MS Excel®• Direct print function for creating test reports on site using the optional BENNING PT 1 printer• Extended functional testing and differential current measurement (max. 2 x 5 min.)• Integrated real time clock for saving measured values with test dateTechnical data:Display: Graphic displayProtective conductor resistance: 0.05 ohm - 20 ohm/Test...

Non-contact phase and rotating field tester.Simple and fast testing of the phase (outer conductor) and thedirection of the rotating field in electrical systems and devices. Compactand simple testing device for home, commercial andindustrial use. Ideal for fast troubleshooting.Test functions:• Testing of the phase (outer conductor) on the isolated ground receptacles,Branching boxes and automatic circuit breakers, etc...• Testing of the rotating field direction (L1-L2-L3) in three-phase supply systems viaIlluminated green LED test probe = right rotating fieldIlluminated red LED test probe = left rotating field• Testing for phase balanceFlashing green LED test probe = balanced phase• Location of cable breaks and interruptions on isolated lines and lines under voltage, e.g. on cable reels and light chainsFeatures:• Flash rate of the LED test probe and signal frequency increases with the amount of voltage present• ON/OFF button with readiness LED for phases and rotating field test• Automatic switching off (AUTO power OFF) after 5 minutes• Highest measurement category CAT IV 600 V• Shock-resistant and dust- and splash-proof ABS enclosureScope of delivery: includes batteries, manual, CD-ROMTechnical dataIndicator: visually via LED test probe, acoustically via buzzerPhase testing: red LED test probe and buzzer, blinking and signal tone rate increases as the voltage increasesRotating field test: green/red LED testing probe for right/left rotating fieldVoltage range: 200 – 1000 V ACFrequency range: 45 – 65 HzON/OFF switch: with readiness LED for phases and rotating field testAutomatic shut-off: 5 minutesMeasurement category: CAT IV 600 V, CAT III 1000 VSafety: DIN EN 61010-1Dimensions (L x W x H): approx. 153 x 20 x 25 mmWeight: approx. 40 gBatteries required: 2 x 1.5 V micro-batteries, type AAA

BENNING PV 1-1+ photovoltaic installation testerTesting to DIN EN 62446 (VDE 0126-23)Simple - operate via buttonsFast - perform tests in just a few secondsSafe - risk-free measuring connection, even when the photovoltaic system is supplying energyA photovoltaic system must be tested and documented in accordance with VDE 0126-23 prior to commissioning and during repeated tests. In addition, electrical measurements are also useful after cleaning and maintenance work to continue to guarantee optimal and low-loss function of the photovoltaic system.The test includes continuity testing of the earthing and equipotential bonding conductors between the photovoltaic generator and the main earthing terminal, measurement of the open-circuit voltage and the short-circuit current in the photovoltaic string as well as the insulation resistance between the active DC conductors (+/-) of the photovoltaic generator and earth. The BENNING PV 1-1+ uses contact-protected test leads with standardised connectors for direct connection to photovoltaic modules or strands. The automatic test sequence warns about incorrect DC polarity and takes over all necessary circuitry to ensure a safe measurement.

Practical hard case with carrying handle and zip, padded inner mesh pocket with zip and flexible fastening loops with hook-and-loop.Suitable for DUSPOL digital, DUSPOL expert, DUSPOL analogue and PROFIPOL+ voltage testers.High protection despite low weightDimensions: 330 x 105 x 65 mm

Flexible AC transformer BENNING CFlex 2Features:• Large illuminated four-digit LCD• Safe measurement of alternating current: 0.1 A - 3000 A (TRUE RMS)• High-performance and multi-functional through TRUE RMS measurement procedure for industrial applications• Display of the current in amps• Safe to operate with a distance of 1.8 m to the measuring point• Measuring (HOLD)/minimum and maximum value memory (MIN/MAX)• Automatic shut-off (can be deactivated)• Low battery display• The highest measuring category CAT IV 600 V allows measurements to be taken directly at the source of the low-voltage installation Technical data:Display: Illuminated four-digit LCDAC current: 0.1 A - 3000 A TRUE RMSMeasurement ranges: 30 A, 300 A, 3000 ATransformer ratio (mV/A)/resolution: 0.01 A, 0.1 A, 1 AMeasured value memory: HOLD, MIN/MAXMeasuring loop length/diameter: 46 cm/16 cmCable diameter of the measuring loop: 8.5 mmConnecting line to the measuring loop: 1.8 mBattery undervoltage display: yesMeasurement category: CAT IV 600 VIncluded with delivery:CFlex 2 current clamp, protective case, 3 x 1.5-V micro batteries (AAA), CD

Voltage and continuity tester with single-pole phase indicator.Indicating steps: 12, 24, 50, 120, 230, 400, 690 V, operational even when batteries are empty or removedAcoustic/optical continuity tester (buzzer/yellow LED)Single-pole phase test (red LED)Polarity test (+/- LED)Contactless cable break detector (yellow LED)Test handle lock for one-hand operation on sockets and for safe storageProtection class: IP 54 (dustproof and splashproof)Overvoltage category CAT III 600 V, CAT II 690 V2x 1.5-V AAA batteries (LR03) included

Benning CM5-1 digital current clamp multimeter• Automatic selection of the correct measurement function of TRUE RMS voltage/current (AC/DC), resistance, continuity and diode• Safe and easy to operate — measurement errors due to the selection of an incorrect measuring range are not possible• Fast response time with five sample values per second• Voltage measurement with low input impedance (LoZ) for suppression of capacitively/inductively interspersed voltagesTechnical data:• DC voltage: 0.7 V - 1000 V• AC voltage: 1.3 V - 750 V• DC/AC current: 0.9 A - 600 A• Resistance: 1 k - 10 k • Continuity and diode test• Memory: HOLD, AutoHold, AutoSense• Jaw size: max. 35 mm• Measurement category: CAT IV 600 V, CAT III 1000 V• Dimensions: 215 x 85 x 51 mm/360 g• Includes case, measuring leads and 9-V battery

Benning LD 60 laser rangefinderFeaturesLength of the signal path: 60 mDistance measurement: 0.05 - 60 mLaser class 2Sensor wavelength: 635 nmAccuracy: 1.5 mmMeasuring speed: 0.5 secondsVisible signal path: yesArea calculation, e.g. determining material requirements such as cables, floor coverings, paintVolume calculation, e.g. tank volume, air conditioning planning, room to be ventilatedSix different indirect measurements, e.g. of heights that cannot be measured directly, of windows in upper floorsSurveying function, e.g. surveying distances into identical sections for wallpaper, determining the requirements of wallpaper strips, tile rows, laminate rows, marking of wallpaper strips, drywall profilesContinuous measurement to find a specific distance to a planeDigital spirit level for aligning beams, profiles and pipeworkDigital spirit level for checking surfaces for horizontal dimensionsMeasured value memory: yes. Measured value memory for 50 measurementsAutomatically rotating colour display (for measurements on walls), excellent contrast due to black background, illuminated displayAdjustable reference plane for measuring between two faces or from an edgeFive different units of measurement (m, cm, mm, ft, in)Up to 1000 measurements with one set of batteries. Protection class (IP): IP54

BENNING CM 11 TRMS milliampere current clamp multimeterNon-linear loads generated, for example, by motor drives with a variable speed, frequency converters or power supply units for office equipment and LED lights, produce a reactive power in the network. This means that multimeters and current clamps that use the averaging measurement procedure (RMS) display less accurate measured values.In many cases—especially in industrial environments—the use of modern TRUE RMS measuring instruments is required. The TRUE RMS measurement procedure shows the actual effective value of an alternating current correctly — regardless of whether the signal form of the current is sinusoidal or distorted.Features and functions:Ideal for troubleshooting in electrical systems, controllers, devices and vehicle electrical systemsPrecise measurement of small AC/DC currents with an optimum resolution of 0.1 mAPrecision thanks to TRUE RMSCompact dimensions with a 23-mm jaw openingMeasurement of stray, differential and leakage currentsMeasurement of 4 mA - 20 mA process signals without interrupting the current loopQuiescent current measurement on vehicle batteries to check for gradual battery dischargePrecise measurement of load currents up to 20 A AC/10 A DCThe highest measuring category CAT IV 30 V allows measurements to be taken directly at the source of the low-voltage installationLC-Display with backlightCompact protective case also suppliedTechnical data:Display: LCD, 6000 counts, illuminatedAC voltage: 0.01 V - 600 VDC voltage: 0.01 V - 600 VDC current: 0.1 mA - 10 AAC current: 0.1 mA - 20 AResistance: 0.1 ohm - 600 kohmsContinuity: YesMemory function: HOLD, MIN/MAX, ZEROMeasurement procedure: TRUE RMSMax. jaw size: 23 mmDimensions (L x W x H): 206 x 76 x 33 mmIncluded with delivery: Current clamp, 2 x 1.5-V micro batteries, instructions, measuring lead set and protective case

BENNING IT 100 multifunctional isolation testerFor precise and safe measurements in trade, industrial and service applications. The BENNING IT 100 insulation resistance and low-resistance meter is ideal for detecting isolation faults or earthing breaks.Measuring functionsLow-impedance resistance of protective earth and equipotential bonding conductor connections (test current: 200 mA)Isolation resistance with test voltages of 50 V, 100 V, 250 V, 500 V and 1000 VResistance measurement with 200-mA test current for testing protective conductor connections with test lead zero calibrationContinuity test has a beep soundVoltage measurementDetermining the polarisation index (PI) and the degree of absorption (DAR)FeaturesA host of measurement functions combined in one deviceTest and external voltage displayed via red LEDTest function for testing the internal fuseIndependent prevention of the test in event of countervoltageCompact, practical housing designRubber protective frame for rough, industrial useLarge LC backlit displayTechnical dataDisplay: 9999 digits (illuminated)Insulation resistance: 300 kOhm - 20 GOhmLow-impedance resistance: 0.01 Ohm - 60 OhmResistance: 0.1 Ohm - 40 kOhmVoltage: 0.1 V - 600 VAC/DCContinuity test: acoustic/optical 600 ohmsAdditional function: polarisation index (PI), absorption level (DAR), automatic discharge function, zero configuration of test leads, integrated fuse test, test interlock in event of countervoltageMeasurement method: RMSMeasurement category: CAT IV 600 V

BENNING CM 10-PV - TRUE RMS current clamp multimeter for photovoltaic systems, heating, ventilation and air-conditioning technology as well as service and industry.Especially efficient thanks to documentation functions. With the data logger and memory function via the Bluetooth® Low Energy 4.0 interface and the associated BENNING MM-CM Link app for downloading, saving and sharing measured values via smartphone/tablet, you can view your measurement results at any time and evaluate them together with colleagues.Product advantages:Voltage measurement up to 1500 V AC/2000 V DC via measuring adapter TA PVMicroamp and temperature measuring range for heating, ventilation and air-conditioning technologyPrecise due to true rms measuring method TRUE RMSINRUSH function for measuring inrush currents (motors etc.)Low-pass filter (HFR high frequency suppression) for measurements on clocked motor drivesMeasuring input for flexible current transformer BENNING CFlex 1 up to 3000 A AC (option)Volt sensor for non-contact phase and cable break test (red LED)Measured value (HOLD) and minimum/maximum value memory (MIN/MAX)LED measuring point lightingMeasurement category CAT IV 600 V, CAT III 1000 VNon-slip and break-proof SoftGrip housingIncl. measuring adapter BENNING TA PV, set of measuring lead/crocodile clips, bag, wire temperature sensor and batteriesIndustrial environments demand TRUE RMS - measuring instruments!Non-linear loads caused, for example, by motor drives with adjustable speed, frequency converters or power supplies for office equipment and LED lights, generate reactive power in the mains. As a result, multimeters and current clamps with the averaging measurement method (RMS) display the measured values less accurately.In many cases and especially in industrial environments the use of modern true RMS measuring instruments is necessary. The TRUE RMS measuring method correctly displays the actual, effective value of an alternating current - regardless of whether the signal form of the current is sinusoidal or distorted.

Benning LD 40 laser rangefinderThe precise and versatile laser rangefinders help you to measure rooms and halls in a matter of a few minutes. In addition, the small aids have a wealth of other helpful functions.Handy and compact design, easy and fast to use.FeaturesLength of the signal path: 40 mDistance measurement: 0.05 - 40 mLaser class 2Sensor wavelength: 635 nmAccuracy: 3 mmMeasuring speed: 0.5 secondsVisible signal path: yesArea calculation, e.g. determining material requirements such as cables, floor coverings, paintVolume calculation, e.g. tank volume, air conditioning planning, room to be ventilatedIndirect measurements (Pythagoras), e.g. of heights that cannot be measured directlyContinuous measurement to find a specific distance to a planeExcellent contrast due to black background, illuminated displayAdjustable reference plane for measuring between two faces or from an edgeThree different units of measurement (m, ft, in)Up to 1000 measurements with one set of batteriesProtection class (IP): IP54Dimensions: width 36 mm, height 98 mm, length 23 mmWeight: 0.076 kgIncludes batteries 2 x 1.5 V Micro/IEC LR03/AAA

Carry case (2013 model) made of synthetic leather with zip.Suitable for all Benning Duspol voltage testers and Dutest continuity testers.

Benning TA 1 crocodile clipsPlug in technology 4 mm fail-safe plug in technologyAlligator clip: yes2 pieces, red/blackProfessional designMeasuring circuit category: Cat IIIMax. voltage of measuring circuit category: 1000 VCurrent load rating 32 A

BENNING CM P2 TRUE RMS mini AC/DC current clamp metersApplicationThanks to their compact design and low weight, the new mini clamp meters will fit in any pocket. They are small, handy and ready to use at any time.Precise measurement of load currents up to 400 AInrush current measurement (INRUSH) of motors and lighting systemsLow-pass filter (LPF, approx. 160 Hz) for suppressing high-frequency pulses on clocked motor drivesMeasuring functionsTRUE RMS AC current measurement up to 400 A DC current measurement up to 400 A Voltage sensor (NCV) for non-contact detection of phase voltageFeaturesTrue RMS measurementMaximum resolution of 10 mA in the 40.00-mA rangeLC display with backlightMeasured value memory (HOLD) and zero calibration using ZERO key (?)Automatic range selection, automatic switch-off (APO after 15 min., can be deactivated) and battery undervoltage indicatorMeasurement category CAT III 600 VTechnical dataDisplay scope: 4000Basic accuracy: 0.02Current AC: 10 mA - 400 ACurrent DC: 10 mA - 400 AVoltage sensor: yesMemory function: HOLD, INRUSH, LPF, ZEROMeasurement method: TRUE RMSMax. jaw size: 23 mmDimensions: 149 x 59 x 27 mmWeight: 140 gMeasurement category: CAT III 600 VProtective bag included

BENNING TA 5, 40 m measuring cable on cable reel with practical rewinder and hand loop.Easy to connect to various installation testers and continuity testers via 4 mm safety test socket/plug.Fits e.g. for:PV installation tester BENNING PV 1, PV 1-1, PV 2Installation tester BENNING IT 130

Socket tester with finger contact for active PE error detection and for testing the tripping function of a 30-mA FI/RCD circuit breakerQuick and easy testing of earthed contact sockets, cable reels and extension cables for correct connection. Wiring errors and inadmissibly high contact voltages at the PE connection are indicated immediately. It is also possible to test the tripping function of a 30-mA FI/RCD circuit breaker by pressing the FI/RCD button.Test functions:Indication of correct wiring via LEDsWiring errors such as missing PE, N and L conductors as well as theinversion of the L and PE conductors are clearly indicated via three LEDsAn active PE test by means of a contact electrode and via the LC display warns of a dangerous contact voltage (> 50 V) being applied to the PE connectionFI/RCD test key for testing the tripping function of 30-mA RCDsFeatures:Safe and easy operation by trained personnel (EUP technicians)Clear status table provides information on the correct connection (OK, green) and the nature of the fault (red) of the earthed contact socketTechnical data:Display: optically via three red signal LEDs for N, PE, L conductor and LC displayVoltage range: 230 V AC, ±10%Frequency range: 50 Hz - 60 HzPE test response threshold: UB FI/RCD test current: approx. 30 mAPower supply: via the test object (no batteries required)Measurement category: CAT II 300 VSafety: DIN EN 61010-1, DIN EN 61010-2-033Dimensions: 80 x 72 x 78 mm (L x W x H)